PXE-E78 : could not locate bootserver
PXE-E78 : could not locate bootserver
Hello Matrix42
Iam from dr oetker netherlands we have isseu white supdepot that pxe server cannot be found.
Iam ussing Empirum 2008 hf5
but problem is that the sync is working perfect all packets are over white all pxe en boot templates
DHCP server configured white empirum options 043,060,128
but the client get the error:
matrix42
PXE-E78 : could not locate server
PXE-M0F : Exiting Intel Boot Agent
No operating system is currently installed on this computer.
help.....
00000634 29.59037018 [1900] DHCP : DB Connection FAILED!
00000635 29.59046936 [1900] DHCP : *********************************************************
debugview
Iam from dr oetker netherlands we have isseu white supdepot that pxe server cannot be found.
Iam ussing Empirum 2008 hf5
but problem is that the sync is working perfect all packets are over white all pxe en boot templates
DHCP server configured white empirum options 043,060,128
but the client get the error:
matrix42
PXE-E78 : could not locate server
PXE-M0F : Exiting Intel Boot Agent
No operating system is currently installed on this computer.
help.....
00000634 29.59037018 [1900] DHCP : DB Connection FAILED!
00000635 29.59046936 [1900] DHCP : *********************************************************
debugview
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
If the DebugView says: "DB Connection failed" check the DSN configuration on the depot server -> does it connect successfully when running the test in the DSN setup?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Hendrik_Ambrosius wrote:If the DebugView says: "DB Connection failed" check the DSN configuration on the depot server -> does it connect successfully when running the test in the DSN setup?
Hmmm connection failed .... somebody from dr oetker gemany has done complete setup here and the upgrade becouse white the old version the supdepot wasn't working.
Now whe have this problem that supdepot (PXE) isn't working thanx for this answere .
Find now out why isnt working the sync is working or must also the new version of sql installed on supdepot?
Becouse that was forgot first time also when we did the upgrade on main Empirum server results that sql log file was full.
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
There is no need to install any SQL components on the depot server.
Just fix the DSN configuration.
Just fix the DSN configuration.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Hendrik_Ambrosius wrote:There is no need to install any SQL components on the depot server.
Just fix the DSN configuration.
I have fixt this manual only than Empirum can not connect I see that in the debugger.
But the test manual in DSN to connect seems to be work perfect! very strange?
Now i have also sent email to support to your company they told re enter the database username and password and reninstall dhcp.
Done that and now it works to connect (like the old way) I see that in the debuger but only than sometimes it gives this error again from the first post.
And PXE gives cannot find boot server.....
00000634 29.59037018 [1900] DHCP : DB Connection FAILED!
00000635 29.59046936 [1900] DHCP : *********************************************************
Only when I do test in DSN than fails again after reinstall of DHCP from empirum!
Than change it to manually than works but in the dubuger fails agian....
And one strange thing I must everytime behind servername a must fill in slash SQLEXPRESS becouse than it connects perfect not white only servername.
Maybe Becouse sql2005 was installed later after the upgrade this was forgeten by college gives now this strange sympthons.
The main server of empirum works Perfect! no strange things white that .
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
What do you mean with "change it to manually" - where do you switch what to manually?
I understand that every time you reinstall the PXE-service (not DHCP!) from DBUtil the DB connections fails. So you probably did not set the SA login credentials in DBUtil correctly. Please do so.
SQLEXPRESS: That's the name of the instance - this is required!
I understand that every time you reinstall the PXE-service (not DHCP!) from DBUtil the DB connections fails. So you probably did not set the SA login credentials in DBUtil correctly. Please do so.
SQLEXPRESS: That's the name of the instance - this is required!
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Hendrik_Ambrosius wrote:What do you mean with "change it to manually" - where do you switch what to manually?
I understand that every time you reinstall the PXE-service (not DHCP!) from DBUtil the DB connections fails. So you probably did not set the SA login credentials in DBUtil correctly. Please do so.
SQLEXPRESS: That's the name of the instance - this is required!
That I mean I reinstall white dbutil the pxe services and also set login credentials..
but no results sorry for miscommunication
littel view of the debuger you see that not all DB connecations are failing
00000009 1.21892667 [4048] DHCP : : DSIK_TRY_LOGIN_EVENT
00000010 1.21903145 [4048] DHCP : *********************************************************
00000011 1.21911216 [4048] DHCP : Starting DB connection...
00000012 1.21990085 [4048] DHCP : DSN : 'NETHERLANDS'
00000013 1.21998322 [4048] DHCP : UserID : 'sa'
00000014 2.39081120 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000015 4.99967289 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000016 5.54647923 [1596] MainWorkingThread looping
00000017 5.71844482 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000018 5.92153692 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000019 5.92167854 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000020 5.92180586 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000021 5.92192793 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000022 5.98449993 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000023 6.06249523 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000024 7.39002848 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000025 9.99952984 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000026 10.54698086 [1596] MainWorkingThread looping
00000027 10.71896744 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000028 10.92199516 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000029 10.92213631 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000030 10.92226410 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000031 10.92238712 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000032 10.98398113 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000033 11.06203747 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000034 12.39052296 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000035 15.00007153 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000036 15.54629993 [1596] MainWorkingThread looping
00000037 15.71906376 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000038 15.92152596 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000039 15.92166710 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000040 15.92179489 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000041 15.92195702 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000042 15.98453903 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000043 16.06253242 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000044 17.39082336 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000045 18.26800728 [4048] DHCP : DB Connection FAILED!
00000046 18.26811218 [4048] DHCP : *********************************************************
00000047 20.00128365 [1596] numWorkingSessions = 1
Later get this in debug
00000230 34.01550674 [4048] DHCP : : DSIK_TRY_LOGIN_EVENT
00000231 34.01761627 [1596] Sync:Found:OS.INI
00000232 34.51549149 [4048] DHCP : *********************************************************
00000233 34.51801300 [1596] Rekursiver Scan von \nl-am-vm-em-02empirum$empinstwizardosAuto4F580765*.*
00000234 35.01554489 [4048] DHCP : Starting DB connection...
00000235 35.51585388 [4048] DHCP : DSN : 'NETHERLANDS'
00000236 35.51819992 [1596] Suchen:\nl-am-vm-em-02empirum$empinstwizardosAuto4F580847*.*
00000237 36.01624298 [4048] DHCP : UserID : 'sa'
00000238 36.01882172 [1596] MainWorkingThread looping
00000009 1.21892667 [4048] DHCP : : DSIK_TRY_LOGIN_EVENT
00000010 1.21903145 [4048] DHCP : *********************************************************
00000011 1.21911216 [4048] DHCP : Starting DB connection...
00000012 1.21990085 [4048] DHCP : DSN : 'NETHERLANDS'
00000013 1.21998322 [4048] DHCP : UserID : 'sa'
00000014 2.39081120 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000015 4.99967289 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000016 5.54647923 [1596] MainWorkingThread looping
00000017 5.71844482 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000018 5.92153692 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000019 5.92167854 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000020 5.92180586 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000021 5.92192793 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000022 5.98449993 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000023 6.06249523 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000024 7.39002848 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000025 9.99952984 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000026 10.54698086 [1596] MainWorkingThread looping
00000027 10.71896744 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000028 10.92199516 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000029 10.92213631 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000030 10.92226410 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000031 10.92238712 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000032 10.98398113 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000033 11.06203747 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000034 12.39052296 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000035 15.00007153 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000036 15.54629993 [1596] MainWorkingThread looping
00000037 15.71906376 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000038 15.92152596 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000039 15.92166710 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000040 15.92179489 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000041 15.92195702 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000042 15.98453903 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000043 16.06253242 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000044 17.39082336 [1596] MATRIXEMPSYNC: CheckBackup: CheckForce returned FALSE
00000045 18.26800728 [4048] DHCP : DB Connection FAILED!
00000046 18.26811218 [4048] DHCP : *********************************************************
00000047 20.00128365 [1596] numWorkingSessions = 1
Later get this in debug
00000230 34.01550674 [4048] DHCP : : DSIK_TRY_LOGIN_EVENT
00000231 34.01761627 [1596] Sync:Found:OS.INI
00000232 34.51549149 [4048] DHCP : *********************************************************
00000233 34.51801300 [1596] Rekursiver Scan von \nl-am-vm-em-02empirum$empinstwizardosAuto4F580765*.*
00000234 35.01554489 [4048] DHCP : Starting DB connection...
00000235 35.51585388 [4048] DHCP : DSN : 'NETHERLANDS'
00000236 35.51819992 [1596] Suchen:\nl-am-vm-em-02empirum$empinstwizardosAuto4F580847*.*
00000237 36.01624298 [4048] DHCP : UserID : 'sa'
00000238 36.01882172 [1596] MainWorkingThread looping
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
OK, please set the password in DBUtil and reinstall the service:
1) Open DBUTIL
2) Go to Actions/Install Configure Services
3) Right click on your PXE server entry
4) Select "Change password of service server"
5) Enter "SA" and your password
6) Reinstall the service
1) Open DBUTIL
2) Go to Actions/Install Configure Services
3) Right click on your PXE server entry
4) Select "Change password of service server"
5) Enter "SA" and your password
6) Reinstall the service
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Hendrik_Ambrosius wrote:OK, please set the password in DBUtil and reinstall the service:
1) Open DBUTIL
2) Go to Actions/Install Configure Services
3) Right click on your PXE server entry
4) Select "Change password of service server"
5) Enter "SA" and your password
6) Reinstall the service
I know that.
If you do that what your discriped you have post I get results what you can see from debuger from my last post.
....
pkleiber wrote:How is your pxe service configured? Which pxe mode do you use?
Could please post the info from your DHCP Option 43?
the option has this
06:01:07:08:07:00:01:01:0A:BA:8A:26:09:0B:00:01:08:4D:61:74:72:69:78:34:32:0A:02:00:4D:FF
PXE is now standing on PXE only (try all three options already)
OK! I'm back from holidays.
If you use dhcp option 43 and 60 then you must use the compatibilty mode for your pxe service.
Could you also please post the ip addresses which you have entered in our dhcp option 43 generator?
If you use dhcp option 43 and 60 then you must use the compatibilty mode for your pxe service.
Could you also please post the ip addresses which you have entered in our dhcp option 43 generator?
Patrick Kleiber
Support Engineer
Matrix42 AG
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.
Support Engineer
Matrix42 AG
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.
Re: PXE-E78 : could not locate bootserver
I can't really understand what you are saying here. It's like a type of MAu Mau and I'll like you to explain me what dhcp option 43 and 60 means please...
-
- Posts: 118
- Joined: 25. Jan 2007, 14:30
- Contact:
Re: PXE-E78 : could not locate bootserver
Option 60 is necessary to tell the client to use port 4011 for contacting the PXE server. This is necessary if PXE and DHCP Server are installed on the same server (because otherwise both are using the same ports).
Option 43 contains the IP of the PXE server. If you are using 43 your PXE request is directly send to this IP and the client is not broadcasting for its PXE server.
Hope this is helpful.
Regards,
bbuschmann.
Option 43 contains the IP of the PXE server. If you are using 43 your PXE request is directly send to this IP and the client is not broadcasting for its PXE server.
Hope this is helpful.
Regards,
bbuschmann.
Who is online
Users browsing this forum: No registered users and 4 guests