Hallo liebe Kollegen,
ich habe folgendes Problem:
- Der Dienst wurde erfolgreich lt. DBUtil installiert (TCP/9100/unverschlüsselt) mit Dienstanmeldung (User ist entsprechend auf die Standort DB Berechtigt mit Gruppe Service)
- Beim Start des Dienstes sehe ich im DBGview:
[4832] 2017-02-10 12:04:21.235 ThreadId=4156 Database configuration read. Data Source:<srvname>\EMPIRUM, Initial catalog:EMPCUSTDB, User:dbo
[4832] 2017-02-10 12:04:21.297 ThreadId=4156 No Empirum API configuration found for : <srvname>
[4832] 2017-02-10 12:04:21.313 ThreadId=4156 Error by reading configuration: No Empirum API configuration found for : <srvname>
Ich wüsste hier allerdings auch nicht wo ich hier noch anderes Konfigurieren soll. Bei einem netstat -a sehe ich auch kein listen auf Port 9100 o.ä.. Hat vielleicht von euch schon jemand diesen Fehler gehabt? Die Suche brachte leider keine Lösung.
Empirumversion: 16.1.2.4700
DB: 7.12
Fehler bei Dienst Empirum API
-
- Posts: 22
- Joined: 28. Jul 2015, 10:39
- Contact:
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Fehler bei Dienst Empirum API
Ist die Gross- und Kleinschreibung von EMPCUSTDB im Service Store genauso wie im DBUTIL? Das ist wichtig.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 22
- Joined: 28. Jul 2015, 10:39
- Contact:
Re: Fehler bei Dienst Empirum API
Soweit komme ich ja garnicht erst, der Konnektor auf dem Matrix Server kann nicht zu dem Empirumserver verbinden, da der Port 9100 gar nicht geöffnet, weil er hier irgend eine Konfiguration nicht finden kann. Ich weiß aber partout nicht, wo ich hier noch etwa konfigurieren soll. Mehr als Rechtklick -> installieren geht nicht.
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Fehler bei Dienst Empirum API
Kann es sein, dass Sie den Diensteservernamen mit FQDN in DButil eingegeben haben?
Es darf nur der kurze Netbios Name dort stehen.
Es darf nur der kurze Netbios Name dort stehen.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 22
- Joined: 28. Jul 2015, 10:39
- Contact:
Re: Fehler bei Dienst Empirum API
Hallo Herr Ambrosius,
vielen Dank für die Hilfe! Da lag der Fehler und nun läuft auch der Import in die Matrix.
vielen Dank für die Hilfe! Da lag der Fehler und nun läuft auch der Import in die Matrix.
Who is online
Users browsing this forum: No registered users and 7 guests