Eine Frage, die gelegentlich aufkommt ist die nach dem User-Teil der Installation. Konfigurationsfiles, Startmenu usw.
Das Empirum startet den Package Robot als System-User.
Was ist dann mit dem evtl. notwendigen User-Teil der Installation?
Also wenn das Paket nicht für "All Users" installiert wird.
Die Antwort ist ganz einfach und entspricht der Empirum Philosophie die auch für andere Pakete gilt.
Wenn ein Setup neben dem Maschinenteil einen expliziten User-Teil benötigt, dann muss man diesen mit Empirum wie gewohnt separat von dem Robot-Paket paketieren.
Dieses separate Paket wird dann entsprechend beim Logon des Users ausgeführt und richtet den User-Teil ein.
Dies ist an sich kein Problem, den der User-Teil ist zumeist nicht viel mehr, als ein paar Verknüpfugnen und Konfigurationsdateien.
Diese werden dann nachinstalliert wenn sich der User an einem PC anmeldet, wie bei Empirum üblich.
Package-Robot: User- und Maschinenteil der Installation
Moderator: MVogt
-
- Posts: 367
- Joined: 03. Oct 2009, 08:57
- Location: Herrenstr.11 * 76706 Dettenheim
- Contact:
Package-Robot: User- und Maschinenteil der Installation
Last edited by Theo_Gottwald on 16. Nov 2009, 13:16, edited 1 time in total.
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Genau. Im Endeffekt ist ein compiliertes Package Robot Script nur eine EXE wie jede andere EXE auch. Man kann sie im Maschinen- oder Userteil starten.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 367
- Joined: 03. Oct 2009, 08:57
- Location: Herrenstr.11 * 76706 Dettenheim
- Contact:
Danke Hendrik, schön mal wieder was von dir zu lesen.Im Endeffekt ist ein compiliertes Package Robot Script nur eine EXE wie jede andere EXE auch
Deine Posts haben oft etwas geniales und einfaches. Zum Beispiel der Satz oben.
Der Satz ist so göttlich, wenn ich mal mein Buch über den Package Robot überarbeite schreibe ich das auf Seite 1 bei der EXE Erstellung als Merksatz hin.
-
- Posts: 367
- Joined: 03. Oct 2009, 08:57
- Location: Herrenstr.11 * 76706 Dettenheim
- Contact:
Re: Package-Robot: User- und Maschinenteil der Installation
If the user part is just some files and regkeys I would diff the first start of the app and create the user part from the result (probably 90% of the apps).
Otherwise I would opt for the MPR technique and call the MPR script from the user part of the package:
Code: Select all
#SET:Userpart, CLIENT
[SET:Userpart]
%App%\compiled-mpr-script.exe
%App%\theapp.exe
Who is online
Users browsing this forum: No registered users and 9 guests