8.3 DOS Namen

Post Reply
User avatar
Ammonjak
Posts: 6
Joined: 21. Dec 2012, 07:43
Contact:

8.3 DOS Namen

Post by Ammonjak » 20. Aug 2013, 15:47

Hey

Bei einer Neuinstallation des Betriebsystems ist die 8.3 DOS Namensbildung deaktiviert. Ist es möglich , dass Empirum diese Funktion abschaltet?

Ich habe leider keinen Anhaltspunkt, wo dies sonst geschehen könnte :lol:

thank you

User avatar
thahn
Posts: 487
Joined: 03. Jan 2007, 09:03
Location: KR - NRW
Contact:

Re: 8.3 DOS Namen

Post by thahn » 20. Aug 2013, 15:58

Hi,

Welche Empirum Version ist im Einsatz ?

cYa
Thomas Hahn
Technical Account Manager

Matrix42 AG

Email: thomas.hahn[at]matrix42.com
http://www.matrix42.de
Skype: thahn42
ICQ: IO25IGO8

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.

User avatar
Ammonjak
Posts: 6
Joined: 21. Dec 2012, 07:43
Contact:

Re: 8.3 DOS Namen

Post by Ammonjak » 21. Aug 2013, 06:43

15.1 (15.1.0.664)

thx

User avatar
thahn
Posts: 487
Joined: 03. Jan 2007, 09:03
Location: KR - NRW
Contact:

Re: 8.3 DOS Namen

Post by thahn » 21. Aug 2013, 09:22

hi,

das muesste durch das WinPE4 kommen, was wir mit 15.1 als Setup für OS-Deploy nutzen. Dort ist im Default die 8.3 Notation disabled.

cYa
Thomas Hahn
Technical Account Manager

Matrix42 AG

Email: thomas.hahn[at]matrix42.com
http://www.matrix42.de
Skype: thahn42
ICQ: IO25IGO8

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.

User avatar
Ammonjak
Posts: 6
Joined: 21. Dec 2012, 07:43
Contact:

Re: 8.3 DOS Namen

Post by Ammonjak » 21. Aug 2013, 10:03

Herzlichen Dank für die Rückmeldung

MIt diesen Informationen bin ich noch auf einen nützlichen Link gestossen:
http://scug.be/sccm/2013/01/15/configmg ... ocal-disk/

Wir werden weiterschauen ...

cheers

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: 8.3 DOS Namen

Post by Hendrik_Ambrosius » 22. Aug 2013, 10:45

Sie können auch auf WAIK3 zurückschalten um dieses Verhalten zu vermeiden:

WINPE_VERSION
Ermöglicht die manuelle Verwendung einer speziellen Version von WinPE:
- Default = Verwendet WinPE 4.x bei der OS Installation
- 3.0 = Verwendet WinPE 3.x bei der OS Installation
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

User avatar
User23
Posts: 29
Joined: 23. Oct 2013, 15:04
Contact:

Re: 8.3 DOS Namen

Post by User23 » 24. Oct 2013, 11:49

Hallo zusammen,

da wir das gleiche Problem haben möchte ich mich gerne hier einklinken.
Leider habe ich noch keine große Erfahrung mit Empirum, daher hätte ich gern mehr Informationen dazu.
Ist es die einzige Möglichkeit, die "alte" WinPE zu nutzen, oder wo könnte man die Installation anpassen mit
- fsutil 8dot3name set 0
oder
- format /s:enable

Vielen Dank im voraus
User23

Post Reply

Return to “Hilfe und FAQ”

Who is online

Users browsing this forum: No registered users and 2 guests