Moin moin,
ich meine mich zu erinnern, dass es mal eine Anleitung gab, wie man die EMC als Paket verteilen kann. Habe gerade im Forum und im KHC gesucht, bin aber nicht mehr fündig geworden...
So oder so - kann mir jemand sagen, ob ich zu blind bin oder wie ich das am Geschicktesten mache (so, dass ich ohne viel Aufwand beim nächsten Hotfix auch die setup.inf anpassen kann)?
Merci,
Lennu
Empirum Management Console als Paket
Empirum Management Console als Paket
Lennart Freyberg
Sysadmin
Deutsche Steinzeug Cremer & Breuer AG
Sysadmin
Deutsche Steinzeug Cremer & Breuer AG
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Einfach die setup.inf aus "install console" einbinden mit folgendem Trick:
Da die Konsolendateien nicht auf die Depotserver synchronisiert werden, muss der Prüfdatei-Eintrag im SWDepot direkt auf den Master verweisen: \\EMPIRUM-MASTER-SERVER\empirum$\Install Console\Setup.inf
Parameter: /AW /S2
Da die Konsolendateien nicht auf die Depotserver synchronisiert werden, muss der Prüfdatei-Eintrag im SWDepot direkt auf den Master verweisen: \\EMPIRUM-MASTER-SERVER\empirum$\Install Console\Setup.inf
Parameter: /AW /S2
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Sollte eigentlich so sein wenn wie beschrieben eingebunden.
Wichtig ist /S2.
Wichtig ist /S2.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Ich würde immer ALLES installieren und dann hinterher über ein EMC-Config-Paket Teile wieder ausblenden. Das geht durch Deregistrierung der entsprechenden DLLs (z.B. EisDriver oder Audit).
Vorteil dieser Methode: Man muss das Original-Paket nicht anpassen -> Updatesicher.
Vorteil dieser Methode: Man muss das Original-Paket nicht anpassen -> Updatesicher.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Who is online
Users browsing this forum: No registered users and 10 guests