Moin Moin aus dem norden,
habt ihr eine Idee:
Wir haben erstmalig den Advanced Agenten per GPO verteilt. Die Clients ziehen sich den Agent auch. Startet man den Rechner dann neu, verursacht der Empirum Agent(laut Eventlog) ca. 30-60Sekunden immer eine Netzwerklast von bis zu 10MB/s...
Dies hat uns schon kurzzeitig eine Standorte gekostet(aus Netzwerksicht) und hat dazu geführt, dass die Kommunikation des Agenten Firewall-technisch gesperrt wurde. Hab dann einen einzelnen Client getestet und die Last kommt immerwieder nach dem Neustart.
Wodran kanns liegen?
EDIT: Version 16.0.2.3955 DB Version: 7,02
Empirum Agent traffic
Moderators: MVogt, moderators
-
- Posts: 25
- Joined: 29. Oct 2015, 08:14
- Contact:
Re: Empirum Agent traffic
HI,
zur Last kann ich nichts sagen, aber technisch gesehen prüft der Agent beim Start gegenüber seinem EmpirumServer (Depot) nach der Aktualität seines lokalen Caches (im Standard C:\EmpirumAgent). Das dauert natürlich einen Moment.
Wenn dadurch ein Standort abgehangen würde, empfiehlt es sich über ein lokales Depot nachzudenken, so das die Clients nicht über das WAN müssen.
cYa
zur Last kann ich nichts sagen, aber technisch gesehen prüft der Agent beim Start gegenüber seinem EmpirumServer (Depot) nach der Aktualität seines lokalen Caches (im Standard C:\EmpirumAgent). Das dauert natürlich einen Moment.
Wenn dadurch ein Standort abgehangen würde, empfiehlt es sich über ein lokales Depot nachzudenken, so das die Clients nicht über das WAN müssen.
cYa
Thomas Hahn
Technical Account Manager
Matrix42 AG
Email: thomas.hahn[at]matrix42.com
http://www.matrix42.de
Skype: thahn42
ICQ: IO25IGO8
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.
Technical Account Manager
Matrix42 AG
Email: thomas.hahn[at]matrix42.com
http://www.matrix42.de
Skype: thahn42
ICQ: IO25IGO8
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.
-
- Posts: 25
- Joined: 29. Oct 2015, 08:14
- Contact:
Re: Empirum Agent traffic
Vll mal als Hinweis... Wir haben die Erstinstallation als GPO eingerichtet mit folgendem Script... Das Problem ist, dass der Empirum Agent sich immerwieder installieren will... Der DC ist Windows Server 2012 R2...
Hat jemand ne Idee?
@echo off
REM ++++++++Set information for script+++++++++
REM Set Empirumserver Environment for Script
Set Empirumservername=Servername
REM Define here AgentVersion and built AgentEXE (Example:EmpirumAgent_16.0.exe) to install
Set AgentVer=16.0
Set InventoryVer=16.0
Set EmpirumAgentExe=\\%Empirumservername%\Configurator$\Packages\Matrix42\EmpirumAgent\EmpirumAgent.exe
Set defaultAgentConfigxml=defaultAgentConfig.xml
REM +++++++++++++++++++++++++++++++++++++++++++
:Clear_Empirumserver_ENV
REM DEL Empirumserver Evironment
Set Empirumserver=
REM Check if Computer gleich EmpirumMasterserver
IF %COMPUTERNAME% == %Empirumservername% goto SkipAgentInst
REM Check if Computer is Client and no Server
FOR /F "tokens=3 delims= " %%i IN ('REG QUERY "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v InstallationType') DO SET OSType=%%i
IF %OSType% == Server goto SkipAgentInst
cls
REM Check if Advanced Agent is installed
REM reg query HKLM\SYSTEM\CurrentControlSet\services\ERIS /v DisplayName || GOTO AgentInst
reg query "HKLM\Software\Matrix42\Empirum Agent\%AgentVer%\Setup" /v DisplayName || GOTO AgentInst
Goto SkipAgentInst
Rem Check if OSRollout is goingon
REG QUERY "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v AutoAdminLogon
If %errorlevel% == 1 Goto AgentInst
FOR /F "tokens=3 delims= " %%i IN ('REG QUERY "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v AutoAdminLogon') DO SET OSRolloutcheck=%%i
IF %OSRolloutcheck% == 1 goto SkipAgentInst
:AgentInst
cls
REM Echo Running Empirum Agent installation: please wait...
REM Calling of the generated AdvanceAgent exe-file
Call %EmpirumAgentExe% /S0 /X8
ping localhost > nul
ping localhost > nul
xcopy \\%EmpirumServerName%\Configurator$\User\%defaultAgentConfigxml% "%windir%\system32\Empirum\AgentConfig.xml" /V /Q /Y > nul
net start eris > nul
cls
:Inventory
REM Echo Running Computer inventory
IF "%PROCESSOR_ARCHITECTURE%"=="AMD64" GOTO 64BIT
Call \\%EmpirumServerName%\Configurator$\Packages\matrix42\Inventory\%InventoryVer%\Windows\System\Empirum\EmpInventory.exe /C:\\%EmpirumServerName%\Configurator$\User\EmpInvScan_WINDOWS.xml /O:\\%EmpirumServerName%\EmpInv$\##DomainName##.%ComputerName%_#SysTime#.xml /E /V2 /M /T /ZIP
goto ENDINV
:64BIT
Call \\%EmpirumServerName%\Configurator$\Packages\matrix42\Inventory\%InventoryVer%\Windows\System\Empirum\x64\EmpInventory.exe /C:\\%EmpirumServerName%\Configurator$\User\EmpInvScan_WINDOWS.xml /O:\\%EmpirumServerName%\EmpInv$\##DomainName##.%ComputerName%_#SysTime#.xml /E /V2 /M /T /ZIP
goto ENDINV
:SkipAgentInst
:ENDINV
Exit
Hat jemand ne Idee?
@echo off
REM ++++++++Set information for script+++++++++
REM Set Empirumserver Environment for Script
Set Empirumservername=Servername
REM Define here AgentVersion and built AgentEXE (Example:EmpirumAgent_16.0.exe) to install
Set AgentVer=16.0
Set InventoryVer=16.0
Set EmpirumAgentExe=\\%Empirumservername%\Configurator$\Packages\Matrix42\EmpirumAgent\EmpirumAgent.exe
Set defaultAgentConfigxml=defaultAgentConfig.xml
REM +++++++++++++++++++++++++++++++++++++++++++
:Clear_Empirumserver_ENV
REM DEL Empirumserver Evironment
Set Empirumserver=
REM Check if Computer gleich EmpirumMasterserver
IF %COMPUTERNAME% == %Empirumservername% goto SkipAgentInst
REM Check if Computer is Client and no Server
FOR /F "tokens=3 delims= " %%i IN ('REG QUERY "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v InstallationType') DO SET OSType=%%i
IF %OSType% == Server goto SkipAgentInst
cls
REM Check if Advanced Agent is installed
REM reg query HKLM\SYSTEM\CurrentControlSet\services\ERIS /v DisplayName || GOTO AgentInst
reg query "HKLM\Software\Matrix42\Empirum Agent\%AgentVer%\Setup" /v DisplayName || GOTO AgentInst
Goto SkipAgentInst
Rem Check if OSRollout is goingon
REG QUERY "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v AutoAdminLogon
If %errorlevel% == 1 Goto AgentInst
FOR /F "tokens=3 delims= " %%i IN ('REG QUERY "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v AutoAdminLogon') DO SET OSRolloutcheck=%%i
IF %OSRolloutcheck% == 1 goto SkipAgentInst
:AgentInst
cls
REM Echo Running Empirum Agent installation: please wait...
REM Calling of the generated AdvanceAgent exe-file
Call %EmpirumAgentExe% /S0 /X8
ping localhost > nul
ping localhost > nul
xcopy \\%EmpirumServerName%\Configurator$\User\%defaultAgentConfigxml% "%windir%\system32\Empirum\AgentConfig.xml" /V /Q /Y > nul
net start eris > nul
cls
:Inventory
REM Echo Running Computer inventory
IF "%PROCESSOR_ARCHITECTURE%"=="AMD64" GOTO 64BIT
Call \\%EmpirumServerName%\Configurator$\Packages\matrix42\Inventory\%InventoryVer%\Windows\System\Empirum\EmpInventory.exe /C:\\%EmpirumServerName%\Configurator$\User\EmpInvScan_WINDOWS.xml /O:\\%EmpirumServerName%\EmpInv$\##DomainName##.%ComputerName%_#SysTime#.xml /E /V2 /M /T /ZIP
goto ENDINV
:64BIT
Call \\%EmpirumServerName%\Configurator$\Packages\matrix42\Inventory\%InventoryVer%\Windows\System\Empirum\x64\EmpInventory.exe /C:\\%EmpirumServerName%\Configurator$\User\EmpInvScan_WINDOWS.xml /O:\\%EmpirumServerName%\EmpInv$\##DomainName##.%ComputerName%_#SysTime#.xml /E /V2 /M /T /ZIP
goto ENDINV
:SkipAgentInst
:ENDINV
Exit
-
- Posts: 521
- Joined: 06. Apr 2006, 22:01
- Location: Bochum
- Contact:
Re: Empirum Agent traffic
Moin!
Das Value DisplayName gibt es nur wenn der Agent bzw. Pakete über den Agent selbst installieren werden. Das ist hier nicht der Fall, deshalb fehlt dieser immer.
reg query "HKLM\Software\Matrix42\Empirum Agent\%AgentVer%\Setup" /v DisplayName || GOTO AgentInst
Lösungsvorschlag1:
reg query "HKLM\Software\Matrix42\Empirum Agent\%AgentVer%\Setup" /v ProductName || GOTO AgentInst
Lösungsvorschlag2:
http://empirum.blogspot.de/2016/02/soft ... g-ist.html
Bei Interesse melde Dich bei mir per Email.
Grüsse in den Norden
Das Value DisplayName gibt es nur wenn der Agent bzw. Pakete über den Agent selbst installieren werden. Das ist hier nicht der Fall, deshalb fehlt dieser immer.
reg query "HKLM\Software\Matrix42\Empirum Agent\%AgentVer%\Setup" /v DisplayName || GOTO AgentInst
Lösungsvorschlag1:
reg query "HKLM\Software\Matrix42\Empirum Agent\%AgentVer%\Setup" /v ProductName || GOTO AgentInst
Lösungsvorschlag2:
http://empirum.blogspot.de/2016/02/soft ... g-ist.html
Bei Interesse melde Dich bei mir per Email.
Grüsse in den Norden
Frank Dethlefsen
Consultant und Coach
UPDATENOW GmbH
Frank.Dethlefsen@updatenow.de
https://empirum.blogspot.de/
Consultant und Coach
UPDATENOW GmbH
Frank.Dethlefsen@updatenow.de
https://empirum.blogspot.de/
Who is online
Users browsing this forum: No registered users and 5 guests