Hallo zusammen,
ich bin der Meinung, dass Herr Horst Dröge von MX42 auf dem Customer Day in Mainz bei seinem Vortrag „Remote Control Best Practice“ erwähnt hatte, dass man über eine Variablen-Setzung innerhalb der EMC die Zuweisung der Clients innerhalb der „Remote Control Management Konsole“ steuern kann.
Kennt sich jemand damit aus und kann mir helfen wie das funktioniert? Oder habe ich mich ggf. verhört?
Danke Euch…
-CLOSED- Remote Control > Variablensetzung in der EMC
-CLOSED- Remote Control > Variablensetzung in der EMC
Last edited by mklein on 26. Nov 2013, 18:14, edited 1 time in total.
Gruß Marco
____________________________
Empirum Version 16.1
ServiceStore Version 8.0.2
____________________________
Empirum Version 16.1
ServiceStore Version 8.0.2
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Remote Control > Variablensetzung in der EMC
Das stimmt. Dafür gibt es die Variable Matrix42_Remote_Control / Folder
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Remote Control > Variablensetzung in der EMC
Danke. Es funktioniert.
Gruß Marco
____________________________
Empirum Version 16.1
ServiceStore Version 8.0.2
____________________________
Empirum Version 16.1
ServiceStore Version 8.0.2
Re: -CLOSED- Remote Control > Variablensetzung in der EMC
Sehr schön.
Wir haben das ausprobiert. Aber leider ohne Erfolg.
Ist da ein bestimmter Syntax zu beachten?
Wir haben das ausprobiert. Aber leider ohne Erfolg.
Ist da ein bestimmter Syntax zu beachten?
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: -CLOSED- Remote Control > Variablensetzung in der EMC
Nein. Nur den Ordnernamen eingeben. z.B. "XYZ" oder "Marketing" oder "Hamburg" ...
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: -CLOSED- Remote Control > Variablensetzung in der EMC
Dann mal bitte für RC ANfänger.
Ich habe im FaStViewer einen Ordner im Root angelegt mit dem Namen Test.
In der EMC habe ich eine Konfigurationsgruppe. In den Variablen dieser Konfigurationsgruppe habe ich bei der Variablen Folder Test eingetragen und für alle übernommen.
In dieser KOnfigurationsgruppe habe ich einen neuen Computer angelegt und diesen installiert. Im FastViewer erscheint der Computer in dem Ordner New clients und nicht im Ordner Test.
Was fehlt?
Ich habe im FaStViewer einen Ordner im Root angelegt mit dem Namen Test.
In der EMC habe ich eine Konfigurationsgruppe. In den Variablen dieser Konfigurationsgruppe habe ich bei der Variablen Folder Test eingetragen und für alle übernommen.
In dieser KOnfigurationsgruppe habe ich einen neuen Computer angelegt und diesen installiert. Im FastViewer erscheint der Computer in dem Ordner New clients und nicht im Ordner Test.
Was fehlt?
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: -CLOSED- Remote Control > Variablensetzung in der EMC
Nichts. Dann Incident eröffnen.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Who is online
Users browsing this forum: No registered users and 10 guests