Hallo,
wir haben hier 3 PC's per Autologin im Einsatz, die rein zu Präsentationszwecken diesen, Ausgabe auf TV, etc.
Wie kann ich einstellen das an diesen Geräten der Remote-Zugriff ohne Benutzereingriff möglich ist
Gruß und vielen Dank
Holger H.
Remote Zugriff ohne Benutzereingriff
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Remote Zugriff ohne Benutzereingriff
Erstellen Sie über das webbasierte Konfigurationstool eine separate Konfiguration mit der Einstellung "nicht nachfragen" für Host/Remoted.
Diese können Sie dann als separate EXE downloaden auf z.B. via Paket auf diesen PCs installieren.
Diese können Sie dann als separate EXE downloaden auf z.B. via Paket auf diesen PCs installieren.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 11
- Joined: 03. Jul 2013, 08:44
- Contact:
Re: Remote Zugriff ohne Benutzereingriff
Habe das online Konfig-Tool offen. Finde diesen Punkt aber nicht. In welchem Reiter muss ich den suchen.mit der Einstellung "nicht nachfragen" für Host/Remoted
Wollen den Punkt "Permission approvels" generell ausschalten.
Danke.
Gruß
Thorsten
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Remote Zugriff ohne Benutzereingriff
Versuchen Sie mal unter "Remote":
Countdown beim Verbinden mit Remote-Client (0=AUS): 1
Nach Countdown automatisch verbinden = "Verbinden"
Countdown beim Verbinden mit Remote-Client (0=AUS): 1
Nach Countdown automatisch verbinden = "Verbinden"
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Remote Zugriff ohne Benutzereingriff
Hallo Herr Ambrosius,
ich habe die Einstellungen so gemacht. Jetzt kommt leider am Client noch die Meldung am Client:
ich habe die Einstellungen so gemacht. Jetzt kommt leider am Client noch die Meldung am Client:
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Remote Zugriff ohne Benutzereingriff
Sollte dazu keiner im Forum helfen kann machen Sie dazu bitte eine Anfrage beim Helpdesk auf.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Who is online
Users browsing this forum: No registered users and 3 guests