Also wenn deine Signatur noch Aktuell ist, wird es wohl daran liegen, dass du noch auf der Version 15.1 Patch06 bist.
Du musst schon bis und mit Patch09(FeaturePack) installiert haben, damit UEFI Boot richtig funktioniert.
Gruss
Erfahrung mit UEFI und Surface 3
Moderator: jknoth
-
- Posts: 155
- Joined: 09. Nov 2011, 20:25
- Location: Offenburg
- Contact:
Re: Erfahrung mit UEFI und Surface 3
Die Signatur war alt.
Ich habe selbstverständlich das FeaturePack installiert.
Wir haben ja auch mittlerweile knapp 60 Dell Venue 11 Pro über UEFI-Boot installiert.
Ich habe selbstverständlich das FeaturePack installiert.
Wir haben ja auch mittlerweile knapp 60 Dell Venue 11 Pro über UEFI-Boot installiert.
Viele Grüße
Dieter Schragner
Empirum v18.0.2
Service Store 9.0.4
Dieter Schragner
Empirum v18.0.2
Service Store 9.0.4
Re: Erfahrung mit UEFI und Surface 3
Hallo Leute,
da wir aktuell wieder Probleme habe, wollte ich mal fragen ob ihr bei euch die Surfaces betanken könnt.
Welches PE2 Version mit welchen Kernelparametern?
da wir aktuell wieder Probleme habe, wollte ich mal fragen ob ihr bei euch die Surfaces betanken könnt.
Welches PE2 Version mit welchen Kernelparametern?
-
- Posts: 712
- Joined: 07. May 2009, 18:27
- Location: Burscheid
- Contact:
Re: Erfahrung mit UEFI und Surface 3
Wir nehmen den neuesten Kernel (373) mit diesen Parametern
ramdisk_size=524288 init=/bin/minit CONSOLE=/dev/tty1 vga=0x317 root=/dev/ram0 rw quiet irqpoll reboot=bios EIS_REINSTALLALLOW=0 EIS_DEBUGMODE=10 EIS_PALIGN=16384 EPE_ZEROMBR=1 EPE_SEC=ntlm EPE_LOAD_MODULES=cdc_ether,r8152
ramdisk_size=524288 init=/bin/minit CONSOLE=/dev/tty1 vga=0x317 root=/dev/ram0 rw quiet irqpoll reboot=bios EIS_REINSTALLALLOW=0 EIS_DEBUGMODE=10 EIS_PALIGN=16384 EPE_ZEROMBR=1 EPE_SEC=ntlm EPE_LOAD_MODULES=cdc_ether,r8152
Who is online
Users browsing this forum: No registered users and 12 guests