ich habe hier ein kleines Problem beim NetSpy/PXESpy auf einem Lenovo X1 Carbon Notebooks/Ultrabooks.
Mir wird leider keine Spy-File erzeugt, nach starten des PXE boots und des EPE-Images läuft das Gerät in einer Schleife.
Benutzt habe ich das aktuellste EPE-Image (Empirum PE2 3.14.4-gentoo_3.71) aber ich vermute einfach mal, dass es dennoch keine Treiberunterstützung für mein Gerät bietet.
Das Lenovo Notebook hat auch eine etwas exotischere Netzwerkkarte.
Ich habe wie in diesem Forumeintrag: " https://forum.matrix42.com/viewtopic.php?f=4&t=13783 " beschrieben, einen Versuch mit der Variante NetSpy per USB-Stick gestartet und dabei nur einen EPE-Log bekommen (Dieser ist angehängt).
Interessant ist, dass in der untersten Zeile wohl keine "pcitable" gefunden wird.
Ist das der Hinweis darauf, dass die Netzwerkkarte nicht unterstützt wird ?
Code: Select all
Begin time for EPE logging: Mon Jun 15 20:52:14 GMT 2015
Outputs of 'dmesg'
------------------------- DMESG --------------------
pci 0000:04:00.0: [8086:095b] type 00 class 0x028000
pci 0000:04:00.0: reg 10: [mem 0xf1000000-0xf1001fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1: bridge window [mem 0xf1000000-0xf10fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbe0b3000-0xbfffffff]
e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff]
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000c3fff]
pnp 00:00: [mem 0x000c4000-0x000c7fff]
pnp 00:00: [mem 0x000c8000-0x000cbfff]
pnp 00:00: [mem 0x000cc000-0x000cffff]
pnp 00:00: [mem 0x000d0000-0x000d3fff]
pnp 00:00: [mem 0x000d4000-0x000d7fff]
pnp 00:00: [mem 0x000d8000-0x000dbfff]
pnp 00:00: [mem 0x000dc000-0x000dffff]
pnp 00:00: [mem 0x000e0000-0x000e3fff]
pnp 00:00: [mem 0x000e4000-0x000e7fff]
pnp 00:00: [mem 0x000e8000-0x000ebfff]
pnp 00:00: [mem 0x000ec000-0x000effff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0xcfffffff]
pnp 00:00: [mem 0xfec00000-0xffffffff]
pnp 00:00: [mem 0xfed4c000-0xfed4bfff disabled]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-3f]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0xd0000000-0xfebfffff window]
pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0090-0x009f]
pnp 00:02: [io 0x0024-0x0025]
pnp 00:02: [io 0x0028-0x0029]
pnp 00:02: [io 0x002c-0x002d]
pnp 00:02: [io 0x0030-0x0031]
pnp 00:02: [io 0x0034-0x0035]
pnp 00:02: [io 0x0038-0x0039]
pnp 00:02: [io 0x003c-0x003d]
pnp 00:02: [io 0x00a4-0x00a5]
pnp 00:02: [io 0x00a8-0x00a9]
pnp 00:02: [io 0x00ac-0x00ad]
pnp 00:02: [io 0x00b0-0x00b5]
pnp 00:02: [io 0x00b8-0x00b9]
pnp 00:02: [io 0x00bc-0x00bd]
pnp 00:02: [io 0x0050-0x0053]
pnp 00:02: [io 0x0072-0x0077]
pnp 00:02: [io 0x1800-0x189f]
pnp 00:02: [io 0x0800-0x087f]
pnp 00:02: [io 0x0880-0x08ff]
pnp 00:02: [io 0x0900-0x097f]
pnp 00:02: [io 0x0980-0x09ff]
pnp 00:02: [io 0x0a00-0x0a7f]
pnp 00:02: [io 0x0a80-0x0aff]
pnp 00:02: [io 0x0b00-0x0b7f]
pnp 00:02: [io 0x0b80-0x0bff]
pnp 00:02: [io 0x15e0-0x15ef]
pnp 00:02: [io 0x1600-0x167f]
pnp 00:02: [io 0x1640-0x165f]
pnp 00:02: [mem 0xf8000000-0xfbffffff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed10000-0xfed13fff]
pnp 00:02: [mem 0xfed18000-0xfed18fff]
pnp 00:02: [mem 0xfed19000-0xfed19fff]
pnp 00:02: [mem 0xfed45000-0xfed4bfff]
system 00:02: [io 0x1800-0x189f] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: [io 0x0880-0x08ff] has been reserved
system 00:02: [io 0x0900-0x097f] has been reserved
system 00:02: [io 0x0980-0x09ff] has been reserved
system 00:02: [io 0x0a00-0x0a7f] has been reserved
system 00:02: [io 0x0a80-0x0aff] has been reserved
system 00:02: [io 0x0b00-0x0b7f] has been reserved
system 00:02: [io 0x0b80-0x0bff] has been reserved
system 00:02: [io 0x15e0-0x15ef] has been reserved
system 00:02: [io 0x1600-0x167f] has been reserved
system 00:02: [io 0x1640-0x165f] has been reserved
system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0080-0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs LEN0048 PNP0f13 (active)
pnp 00:0a: [mem 0xd0010000-0xd001ffff]
pnp 00:0a: [mem 0xd0000000-0xd000ffff]
system 00:0a: [mem 0xd0010000-0xd001ffff] has been reserved
system 00:0a: [mem 0xd0000000-0xd000ffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 8: assigned [mem 0xd0100000-0xd02fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd02fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1: bridge window [mem 0xf1000000-0xf10fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd02fffff]
pci_bus 0000:03: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf1000000-0xf10fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 26232k freed
bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.20)
msgmni has been set to 1631
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xe0000000, mapped to 0xf8280000, using 3072k, total 32704k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
XENFS: not registering filesystem on non-xen platform
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI No-Shortcut mode
RAMDISK: gzip image found at block 0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing unused kernel memory: 408k freed
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800, board id: 3072, fw id: 1795685
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
tsc: Refined TSC clocksource calibration: 2394.457 MHz
Switching to clocksource tsc
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input2
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf113d000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf1120000
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 11 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high-speed USB device number 2 using ehci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
hub 2-0:1.0: unable to enumerate USB device on port 2
usb 2-5: new full-speed USB device number 3 using xhci_hcd
usb 2-5: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-6: new full-speed USB device number 4 using xhci_hcd
usb 2-7: new full-speed USB device number 5 using xhci_hcd
usb 2-7: No LPM exit latency info found. Power management will be impacted.
usb 2-8: new high-speed USB device number 6 using xhci_hcd
usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
scsi0 : usb-storage 3-2:1.0
scsi 0:0:0:0: Direct-Access JetFlash Transcend 16GB 1100 PQ: 0 ANSI: 6
usbcore: deregistering interface driver usb-storage
usbcore: registered new interface driver asix
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
input: PC Speaker as /devices/platform/pcspkr/input/input3
SCSI subsystem initialized
ide-gd driver 1.18
SGI XFS with security attributes, large block/inode numbers, no debug enabled
NTFS driver 2.1.30 [Flags: R/O MODULE].
JFS: nTxBlock = 8192, nTxLock = 65536
Key type dns_resolver registered
NET: Registered protocol family 33
Key type rxrpc registered
Key type rxrpc_s registered
kAFS: Red Hat AFS client v0.1 registering.
async_tx: api initialized (async)
raid6: mmxx1 3505 MB/s
raid6: mmxx2 4469 MB/s
raid6: sse1x1 3800 MB/s
raid6: sse1x2 4519 MB/s
raid6: sse2x1 7696 MB/s
raid6: sse2x2 9155 MB/s
raid6: using algorithm sse2x2 (9155 MB/s)
raid6: using ssse3x1 recovery algorithm
xor: automatically using best checksumming function:
avx : 22638.000 MB/sec
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
md: raid10 personality registered for level 10
md: raid1 personality registered for level 1
md: linear personality registered for level -1
device-mapper: multipath: version 1.5.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
---------------------- END DMESG ---------------------
Outputs of 'lsmod'
------------------------- LSMOD --------------------
Module Size Used by
dm_mirror 9763 0
dm_region_hash 5036 1 dm_mirror
raid0 6256 0
dm_thin_pool 28592 0
dm_bio_prison 2676 1 dm_thin_pool
multipath 4461 0
dm_snapshot 22039 0
dm_round_robin 1616 0
dm_multipath 11673 1 dm_round_robin
scsi_dh 3518 1 dm_multipath
linear 2996 0
dm_raid 11253 0
raid1 20861 1 dm_raid
dm_log 6301 2 dm_mirror,dm_region_hash
dm_persistent_data 26070 1 dm_thin_pool
dm_bufio 9632 1 dm_persistent_data
crc32c 1093 1
libcrc32c 627 1 dm_persistent_data
raid10 33039 1 dm_raid
dm_crypt 10612 0
dm_zero 784 0
dm_mod 47090 9 dm_mirror,dm_thin_pool,dm_snapshot,dm_multipath,dm_raid,dm_log,dm_bufio,dm_crypt,dm_zero
raid456 45007 1 dm_raid
md_mod 80122 7 raid0,multipath,linear,dm_raid,raid1,raid10,raid456
async_pq 2295 1 raid456
async_xor 1610 2 raid456,async_pq
xor 14789 1 async_xor
async_memcpy 771 1 raid456
async_raid6_recov 866 1 raid456
raid6_pq 86281 2 async_pq,async_raid6_recov
async_tx 1271 5 raid456,async_pq,async_xor,async_memcpy,async_raid6_recov
cifs 199288 0
ncpfs 33892 0
minix 19754 0
udf 58284 0
crc_itu_t 1012 1 udf
af_rxrpc 56519 0
dns_resolver 3141 0
jfs 127316 0
reiserfs 161713 0
ntfs 71074 0
coda 21017 0
xfs 340871 0
exportfs 2410 1 xfs
msdos 4892 0
isofs 24219 0
ide_gd_mod 11902 0
sd_mod 22673 0
scsi_mod 97881 2 scsi_dh,sd_mod
pcspkr 1264 0
input_polldev 1799 0
xtkbd 1575 0
sunkbd 2770 0
newtonkbd 1407 0
ff_memless 3164 0
sermouse 2451 0
edd 5389 0
asix 14509 0
libphy 13969 1 asix
usbnet 10851 1 asix
mii 2804 2 asix,usbnet
usbhid 25848 0
sl811_hcd 7548 0
xhci_hcd 61460 0
uhci_hcd 16103 0
ohci_hcd 15615 0
isp116x_hcd 10170 0
ehci_hcd 30412 0
usbcore 96644 9 asix,usbnet,usbhid,sl811_hcd,xhci_hcd,uhci_hcd,ohci_hcd,isp116x_hcd,ehci_hcd
usb_common 567 1 usbcore
---------------------- END LSMOD ---------------------
Outputs of 'lspci'
------------------------- lspci --------------------
00:00.0 Host bridge: Intel Corporation: Unknown device 1604 (rev 09)
00:02.0 VGA compatible controller: Intel Corporation: Unknown device 1616 (rev 09)
00:03.0 Audio device: Intel Corporation: Unknown device 160c (rev 09)
00:14.0 USB Controller: Intel Corporation: Unknown device 9cb1 (rev 03)
00:16.0 Communication controller: Intel Corporation: Unknown device 9cba (rev 03)
00:19.0 Ethernet controller: Intel Corporation: Unknown device 15a3 (rev 03)
00:1b.0 Audio device: Intel Corporation: Unknown device 9ca0 (rev 03)
00:1c.0 PCI bridge: Intel Corporation: Unknown device 9c92 (rev e3)
00:1c.1 PCI bridge: Intel Corporation: Unknown device 9c94 (rev e3)
00:1d.0 USB Controller: Intel Corporation: Unknown device 9ca6 (rev 03)
00:1f.0 ISA bridge: Intel Corporation: Unknown device 9cc3 (rev 03)
00:1f.2 SATA controller: Intel Corporation: Unknown device 9c83 (rev 03)
00:1f.3 SMBus: Intel Corporation: Unknown device 9ca2 (rev 03)
00:1f.6 Signal processing controller: Intel Corporation: Unknown device 9ca4 (rev 03)
04:00.0 Network controller: Intel Corporation: Unknown device 095b (rev 59)
---------------------- END lspci ---------------------
Outputs of 'lspci -n'
------------------------- lspci -n --------------------
00:00.0 Class 0600: 8086:1604 (rev 09)
00:02.0 Class 0300: 8086:1616 (rev 09)
00:03.0 Class 0403: 8086:160c (rev 09)
00:14.0 Class 0c03: 8086:9cb1 (rev 03)
00:16.0 Class 0780: 8086:9cba (rev 03)
00:19.0 Class 0200: 8086:15a3 (rev 03)
00:1b.0 Class 0403: 8086:9ca0 (rev 03)
00:1c.0 Class 0604: 8086:9c92 (rev e3)
00:1c.1 Class 0604: 8086:9c94 (rev e3)
00:1d.0 Class 0c03: 8086:9ca6 (rev 03)
00:1f.0 Class 0601: 8086:9cc3 (rev 03)
00:1f.2 Class 0106: 8086:9c83 (rev 03)
00:1f.3 Class 0c05: 8086:9ca2 (rev 03)
00:1f.6 Class 1180: 8086:9ca4 (rev 03)
04:00.0 Class 0280: 8086:095b (rev 59)
---------------------- END lspci -n ---------------------
Content of '/proc/partitions'
------------------------- /proc/partitions --------------------
major minor #blocks name
---------------------- END /proc/partitions ---------------------
Content of '/proc/net/dev'
------------------------- /proc/net/dev --------------------
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 6923701 5050 0 0 0 0 0 0 6923701 5050 0 0 0 0 0 0
---------------------- END /proc/net/dev ---------------------
Content of '/proc/cmdline'
------------------------- /proc/cmdline --------------------
BOOT_IMAGE=kernel ramdisk_size=328192 init=/bin/minit CONSOLE=/dev/tty1 vga=0x317 root=/dev/ram0 rw quiet irqpoll pci=nomsi EIS_REINSTALLALLOW=0 EPE_LANGUAGE=ENU EPE_OSSEL=0 EPE_MBRID=0062DFA-056F6EB-0000000-0000000 initrd=/initrd.gz
---------------------- END /proc/cmdline ---------------------
ls -l /lib/modules/
------------------------- /lib/modules/ --------------------
total 1
drwxr-xr-x 4 root root 1024 Jun 15 20:51 3.7.7-gentoo
---------------------- END /lib/modules/ ---------------------
uname -r
------------------------- uname -r --------------------
3.7.7-gentoo
---------------------- END uname -r ---------------------
No /tmp/pcitable found
------------------------- Debug Messages --------------------
10 uncrypt reading disk.ini
0 uncrypt decrypting ...
0 uncrypt decryption completed successfully
5 syslog catching pending Kernel-messages
10 boot msg_enter
0 boot mounting /proc
0 boot mounting /sys
5 boot performing udev initial scan
5 boot making udev managing hotplug events
0 boot choosing network mode
0 boot network mode: dhcp
10 syslog starting klogd
10 syslog starting syslogd
0 boot setting up modul-dependentcies
0 boot setting hostname
0 boot checking if CPU has 64Bit capability
0 boot CPU has 64Bit capability
0 boot preparing modules
0 boot updating modules.conf
0 boot loading usb modules
10 lo entering runlevel
1 lo setting up loopback interface
1 lo Loopback interface succsessfully set up
10 httpd entering runlevel
10 startx entering runlevel
1 httpd Configuring .htaccess
0 startx starting Tiny-X for framebuffer devices Xfbdev
1 httpd htpassword successfully configured
1 httpd setting environment-variable $DESKTOP_DEST
1 httpd httpd starting httpd
0 startx setting DISPLAY-variable
0 startx Starting Browser
10 startx browser executed successfully
10 modsetup entering runlevel
0 modsetup preparing modules directory
0 modsetup removing usb_storage
0 modsetup Loading USB Net driver asix
0 modsetup loading edd support
0 modsetup loading input device driver
0 modsetup installing Driver sermouse
0 modsetup installing Driver ff-memless
0 modsetup installing Driver newtonkbd
0 modsetup installing Driver sunkbd
0 modsetup installing Driver xtkbd
0 modsetup installing Driver input-polldev
0 modsetup installing Driver pcspkr
0 modsetup installing Installing IDE-drivers
0 modsetup installing NIC-drivers
0 modsetup installing SCSI-drivers
0 modsetup loading scsi low-level-drivers
0 modsetup loading inserting scsi disk-driver
0 modsetup loading inserting ide disk-driver
0 modsetup loading fs-support
0 modsetup installing Driver msdos
0 modsetup installing Driver xfs
0 modsetup installing Driver coda
0 modsetup installing Driver ntfs
0 modsetup installing Driver reiserfs
0 modsetup installing Driver jfs
0 modsetup installing Driver exportfs
0 modsetup installing Driver kafs
0 modsetup installing Driver udf
0 modsetup installing Driver minix
0 modsetup installing Driver ncpfs
0 modsetup installing Driver cifs
0 modsetup installing Driver isofs
0 modsetup loading raid and lvm
0 modsetup installing Driver raid456
0 modsetup installing Driver dm-zero
0 modsetup installing Driver dm-crypt
0 modsetup installing Driver raid10
0 modsetup installing Driver dm-persistent-data
0 modsetup installing Driver dm-log
0 modsetup installing Driver dm-raid
0 modsetup installing Driver linear
0 modsetup installing Driver dm-round-robin
0 modsetup installing Driver md-mod
0 modsetup installing Driver dm-snapshot
0 modsetup installing Driver multipath
0 modsetup installing Driver dm-mod
0 modsetup installing Driver raid1
0 modsetup installing Driver dm-thin-pool
0 modsetup installing Driver raid0
0 modsetup installing Driver dm-region-hash
0 modsetup installing Driver dm-multipath
0 modsetup installing Driver dm-mirror
0 modsetup installing Driver dm-bio-prison
0 modsetup installing Driver dm-bufio
------------------------- End Debug Messages --------------------
------------------------- EPE_Info.txt --------------------
OCT v3.04 Datum: 25.02.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 28.01.2011
empirum.pcimap 25.03.2010
Bugfix: PRB22115: Added new driver "hpsa" for HP Smart Arrays
Modified: KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.05 Datum: 01.03.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 01.03.2011
empirum.pcimap 25.03.2010
Bugfix: 18880: Handling of special characters (\ $ ?) in passwords
Modified: initrd: /bin/functions.sh
-------------------------------------------------------------------------------
OCT v3.06 Datum: 14.03.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 14.03.2011
empirum.pcimap 25.03.2010
Bugfix: 20135: Reading of configfile from TFTP-Cache
Modified: initrd: /bin/functions.sh
-------------------------------------------------------------------------------
OCT v3.07 Datum: 17.03.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 17.03.2011
empirum.pcimap 25.03.2010
Bugfix: 20076: Replace also PXE-ServerIP (if EmpirumServer=PXE-Server) if EmpSRVLong from configuration
should be replace via DHCP-Options or configfile in TFTP-Root
Modified: initrd: /bin/functions.sh, buildpxecmd
-------------------------------------------------------------------------------
OCT v3.08 Datum: 11.04.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 11.04.2011
empirum.pcimap 25.03.2010
Bugfix: 21603: Variables from the CFG-File from BMC should be read before.
Modified: initrd: runlevel network
-------------------------------------------------------------------------------
OCT v3.09 Datum: 20.04.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 20.04.2011
empirum.pcimap 25.03.2010
Bugfix: 21598: Do not abort if unattend.xml file for vista+ not found on server
Modified: initrd: runlevel getconfig
-------------------------------------------------------------------------------
OCT v3.10 Datum: 07.06.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 07.06.2011
empirum.pcimap 25.03.2010
Bugfix: 20955: Added reports for executed GetHostByName
Modified: initrd: runlevel buildpxecmd
-------------------------------------------------------------------------------
OCT v3.11 Datum: 08.06.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 08.06.2011
empirum.pcimap 25.03.2010
Bugfix: 17726: Added reports about mount errors
Modified: initrd: runlevel logon
-------------------------------------------------------------------------------
OCT v3.12 Datum: 15.06.2011
Contents: KERNEL 15.06.2011
modules.tgz 15.06.2011
initrd 08.06.2011
empirum.pcimap 25.03.2010
Bugfix: 22992: Kernel-Update to 2.6.39-gentoo-r1
Modified: KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.13 Datum: 15.07.2011
Contents: KERNEL 15.06.2011
modules.tgz 15.06.2011
initrd 15.07.2011
empirum.pcimap 25.03.2010
Bugfix: 23155: Fallback to IP-based mount, on mount fail. Get SERVERIP via gethostbyName if it is not specified
Modified: initrd --> logon, functions.sh
-------------------------------------------------------------------------------
OCT v3.14 Datum: 22.07.2011
Contents: KERNEL 22.07.2011
modules.tgz 22.07.2011
initrd 22.07.2011
empirum.pcimap 25.03.2010
Bugfix: 23713: Kernel-Update to 2.6.39-gentoo-r3 + New Mount-option 'direct' to solve read/write problems on mount points
Modified: KERNEL, modules.tgz and logon
-------------------------------------------------------------------------------
OCT v3.15 Datum: 29.07.2011
Contents: KERNEL 29.07.2011
modules.tgz 29.07.2011
initrd 22.07.2011
empirum.pcimap 25.03.2010
Bugfix 21845: Kernel-Update to 3.0.0-gentoo
Modified: KERNEL, modules.tgz
-------------------------------------------------------------------------------
OCT v3.16 Datum: 05.08.2011
Contents: KERNEL 29.07.2011
modules.tgz 05.08.2011
initrd 22.07.2011
empirum.pcimap 25.03.2010
Bugfix 23713: Build of vendor driver e1000e into current kernel 3.0.0-gentoo
Modified: modules.tgz
-------------------------------------------------------------------------------
OCT v3.17 Datum: 23.08.2011
Contents: KERNEL 23.08.2011
modules.tgz 23.08.2011
initrd 22.07.2011
empirum.pcimap 25.03.2010
Bugfix 24687: Added new versions of firmwares for NIC drivers like bnx2 and bnx2x
Modified: KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.18 Datum: 14.10.2011
Contents: KERNEL 14.10.2011
modules.tgz 14.10.2011
initrd 22.07.2011
empirum.pcimap 25.03.2010
Bugfix 25749: Kernel-Update to 3.0.6-gentoo, Intel-driver e1000e implemented and bnx2-firmwares updated
Modified: KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.19 Datum: 14.10.2011
Contents: KERNEL 14.10.2011
modules.tgz 14.10.2011
initrd 14.10.2011
empirum.pcimap 25.03.2010
Bugfix 25198: If EmpSRVLONG as DHCP-Option is empty, do not try to use it to set Server and FQDN
Modified: initrd -> /bin/functions.sh
-------------------------------------------------------------------------------
OCT v3.20 Datum: 11.11.2011
Contents: KERNEL 14.10.2011
modules.tgz 14.10.2011
initrd 11.11.2011
empirum.pcimap 25.03.2010
Bugfix 25198: Do not set SERVERIP to empty string if EmpSrvLong is empty or only a hostname
Do not try to set ServerIP to /etc/hosts if ServerIP is empty
Modified: initrd -> /bin/functions.sh, runlevel network
-------------------------------------------------------------------------------
OCT v3.21 - 01.079 Date: 06.01.2012
Bugfix 26339: Empty custom.pcimap removed from download folder, so customer version
of this file will not be replaced anymore
Modification: Download folder for FTP
-------------------------------------------------------------------------------
OCT v3.22 - 01.080 Date: 16.01.2012
Bugfix 26456: Kernel-Update to 3.2.1-gentoo
Modification: KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.23 - 01.081 Date: 07.02.2012
Bugfix 26970: 1) New kernel parameter EPE_DHCPCONF created. If it is 0 the dhclient.conf will not be
created on runtime of EPE client. -> Bugfix for DEVK
2) Picked up network script and added some messages
Modification: initrd -> network
-------------------------------------------------------------------------------
OCT v3.24 - 01.082 Date: 08.02.2012
Bugfix 27283: Added firmwares for NIC drivers
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
OCT v3.25 - 01.083 Date: 10.02.2012
Bugfix 21119: Added new entry to empirum.pcimap
Modification: empirum.pcimap
-------------------------------------------------------------------------------
OCT v3.26 - 01.084 Date: 17.02.2012
Bugfix 27454: Added new USB-To-Ethernet driver smsc75xx
To load this driver it must be set following kernel parameter EPE_LOAD_MODULES=smsc75xx
because it does not be added to modules.pcimap
Modification: KERNEL, modules.tgz and empirum.pcimap
-------------------------------------------------------------------------------
OCT v3.27 - 01.085 Date: 29.02.2012
Bugfix 27388: KernelUpdate to 3.2.6-gentoo and added "Support of Multiable CPUs" to expand the count of interrupts
Modification: KERNEL, modules.tgz
-------------------------------------------------------------------------------
OCT v3.28 - 01.086 Date: 01.03.2012
Bugfix DEVK: Build of vendor driver e1000e into current kernel 3.2.6-gentoo
Modification: KERNEL, modules.tgz
-------------------------------------------------------------------------------
OCT v3.29 - 01.087 Date: 02.03.2012
Bugfix 27594: Escape all characters (inclusively special characters) in password so that can be read from environment (for EIS)
Modification: initrd --> /bin/functions.sh --> read_and_allocate_options
-------------------------------------------------------------------------------
v3.30 - 01.088 Date: 08.03.2012, OCT
Bugfix 27859: Sort found linked interfaces to begin scanning with eth0
Modification: initrd --> /bin/functions.sh --> load_alternative_modules_and_get_linked_interfaces
-------------------------------------------------------------------------------
v3.31 - 01.089 Date: 09.03.2012, OCT
Bugfix 27365: KernelUpdate to 3.2.9-gentoo and added "Xen Guest support" to install VMs on XenServer
Modification: initrd --> /bin/functions.sh --> read_and_allocate_options
KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.32 - 01.090 Date: 11.05.2012, OCT
Bugfix 28870: KernelUpdate to 3.3.4-gentoo, patch for driver forcedeth, e1000e replaced with vendor driver
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.33 - 01.091 Date: 24.05.2012, OCT
Bugfix 29016: All scripts in runlevel prepare are collected in only one, so we have not to enhance EPE for new OS types any more
Modification: initrd --> all scripts in runlevel prepare
-------------------------------------------------------------------------------
v3.34 - 01.092 Date: 22.06.2012, OCT
Bugfix 29221: Kernel update to 3.4.3-gentoo with patch of forcedeth driver, NIC firmwares,
new driver 'alx' and with vendor driver 'e1000e'
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.35 - 01.093 Date: 25.06.2012, OCT
Bugfix XXXXX: Activated "ATA support for libsas" in Kernel to support SAS disks (DevID=1d6b and 1d02)
in machines from Fujitsu Celsius
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.36 - 01.094 Date: 17.07.2012, OCT
Task 29896: EPE must not check OS type anymore. Runlevel getconfig and getimage revised
Modification: initrd
-------------------------------------------------------------------------------
v3.37 - 01.095 Date: 25.07.2012, OCT
Bugfix 29973: Don´t use mount options "nounix,noserverino" if Kernelparameter EPE_DONOTSETMOUNTOPTIONS=1 is set
Neccessary for FreeBSD FileShares
Modification: initrd -> runlevel logon
-------------------------------------------------------------------------------
v3.38 - 01.096 Date: 27.07.2012, OCT
Bugfix 30012: Added USB3.0 support into the current kernel
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.39 - 01.097 Date: 03.08.2012, OCT
Bugfix 30012: Load USB3.0 driver xhci-hcd explicitly to runtime
Modification: initrd --> runlevel boot
-------------------------------------------------------------------------------
v3.40 - 01.098 Date: 08.08.2012, OCT
Bugfix 30272: Variable MISC -> OS from disk.ini must be convert to upper case to avoid
problems with case-sensivity
Modification: initrd --> runlevel getimage
-------------------------------------------------------------------------------
v3.41 - 02.000 Date: 24.08.2012, OCT
Bugfix 30629: KernelUpdate to 3.5.2-gentoo (contains drivers alx, e1000e from vendors, patch for driver forcedeth and NIC firmwares)
Modification: KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.42 - 02.001 Date: 27.08.2012, OCT
Bugfix 30677: Rebranding EPE -> new gifs added for EPE client
Modification: initrd --> /var/www/data/ --> new gifs
-------------------------------------------------------------------------------
v3.43 - 02.002 Date: 10.09.2012, OCT
Bugfix 30944: - Added some CIFS attributes like "Support legacy servers which use weaker LANMAN security"
- Deprecated mount option 'direct' replaced with cache=none
Modification: initrd, KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.44 - 02.003 Date: 18.09.2012, OCT
Bugfix 30775: Update of 'dmraid' and 'device-mapper' to support new SWRAID controller
Modification: initrd
-------------------------------------------------------------------------------
v3.45 - 02.004 Date: 19.09.2012, OCT
Bugfix 29191: Handle new dhcp option SERVICESERVERIP to avoid use of PXEImgChange.exe
Modification: initrd
-------------------------------------------------------------------------------
v3.46 - 02.005 Date: 02.10.2012, OCT
Bugfix 30775: Undo unneeded changes for 'dmraid' and 'device-mapper' to support new SWRAID controller
Modification: initrd
-------------------------------------------------------------------------------
v3.47 - 02.006 Date: 02.10.2012, OCT
Bugfix 31233: EPE Localization fixes
Modification: initrd -> startx
-------------------------------------------------------------------------------
v3.48 - 02.007 Date: 12.10.2012, OCT
Bugfix 31363: Missing driver 'alx' because of build failures
Modification: KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.49 - 02.008 Date: 15.10.2012, OCT
Bugfix 31116: EndOfLife was failed because of missing OS type
Modification: initrd --> getconfig & getimage
-------------------------------------------------------------------------------
v3.50 - 02.009 Date: 17.10.2012, OCT
Bugfix 31502: Added convenient message if Scripts2 directory on Empirum server is missing
Modification: initrd --> getimage
-------------------------------------------------------------------------------
v3.51 - 02.010 Date: 30.10.2012, OCT
Bugfix 31630: Syntax error in message
Modification: initrd --> getimage
-------------------------------------------------------------------------------
v3.52 - 02.011 Date: 05.11.2012, OCT
Bugfix 31618: Kernel update to linux-3.6.4-gentoo --> support of new ASIX USB Net driver
Modification: KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.53 - 02.012 Date: 09.11.2012, OCT
Bugfix 31640: Load ASIX USB Net driver automatically in runlevel modsetup
Modification: initrd
-------------------------------------------------------------------------------
v3.54 - 02.013 Date: 30.11.2012, OCT
Bugfix 31936: Reload the 3com driver 3c59x - It is needed for 3C905C TX/TX-M card
Modification: initrd --> network
-------------------------------------------------------------------------------
v3.55 - 02.014 Date: 25.01.2013, OCT
Bugfix 32533: PRB24978: igb driver patched + Kernel update to 3.7.2-gentoo
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.56 - 02.015 Date: 15.02.2013, OCT
Bugfix 32743: Kernel update to 3.7.7-gentoo with patches for forcedeth, igb and alx drivers
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
------------------------- End EPE_Info.txt --------------------
No /tmp/pcitable found. EPE can`t create any SPY file.
Bitte um Hilfe..
MfG
Boris.