NetSpy mit neuem Client: [networking] no suitable interfaces

Moderator: jknoth

Post Reply
Chef
Posts: 21
Joined: 10. Jul 2015, 10:36
Contact:

NetSpy mit neuem Client: [networking] no suitable interfaces

Post by Chef » 27. Jan 2016, 14:14

Hallo zusammen,

ich versuche für einen Dell Precision 7510 NetSpy laufen zu lassen, bekomme allerdings immer folgende Meldung:
[networking] entering runlevel
[networking] no suitable interfaces found - aborting!

Ich habe schon mehrere EPEs getestet, aber leider ohne Erfolg.

Log- und Spy-Datei vom USB-Stick weiter unten...

Vielen Dank im Voraus!

LOG:

Code: Select all

Begin time for EPE logging: Wed Jan 27 10:52:49 GMT 2016


Outputs of 'dmesg'
------------------------- DMESG --------------------

pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a111] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a150] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf64c000-0xdf64ffff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf648000-0xdf64bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf620000-0xdf62ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf652000-0xdf6520ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf600000-0xdf61ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [10de:13b1] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xdd000000-0xddffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xde000000-0xde07ffff pref]
pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xde080000-0xde083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xdd000000-0xde0fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xdf500000-0xdf501fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:03:00.0: [10ec:525a] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x14: [mem 0xdeb00000-0xdeb00fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xdeb00000-0xdf4fffff]
pci 0000:00:1c.2:   bridge window [mem 0xd2b00000-0xd34fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.4:   bridge window [mem 0xde100000-0xdeafffff]
pci 0000:00:1c.4:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x14, I/O: command/status = 0x934, data = 0x930
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00090800-0x0009ffff]
e820: reserve RAM buffer [mem 0x6b49f000-0x6bffffff]
e820: reserve RAM buffer [mem 0x484800000-0x487ffffff]
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:03: [io  0x0680-0x069f] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0x1800-0x18fe] could not be reserved
system 00:03: [io  0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io  0x0800-0x087f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs DLL06d9 PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (disabled)
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:0b: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:0b: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:0b: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:0b: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:0b: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:0b: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [io  0xff00-0xfffe] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0d: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0d: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: Plug and Play ACPI device, IDs SMO8810 (active)
pnp: PnP ACPI: found 15 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xdd000000-0xde0fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xdeb00000-0xdf4fffff]
pci 0000:00:1c.2:   bridge window [mem 0xd2b00000-0xd34fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.4:   bridge window [mem 0xde100000-0xdeafffff]
pci 0000:00:1c.4:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x79800000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdd000000-0xde0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xdf500000-0xdf5fffff]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xdeb00000-0xdf4fffff]
pci_bus 0000:03: resource 2 [mem 0xd2b00000-0xd34fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xde100000-0xdeafffff]
pci_bus 0000:04: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 37208K (f55a8000 - f79fe000)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.22)
msgmni has been set to 1497
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xd1000000, mapped to 0xf8380000, using 3072k, total 16384k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
acpi device:0d: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input4
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
fujitsu_laptop: driver 0.6.0 successfully loaded
fujitsu_tablet: Unknown (using defaults)
msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Using IPI No-Shortcut mode
usb 1-6: new full-speed USB device number 2 using xhci_hcd
psmouse serio1: alps: Unknown ALPS touchpad: E7=73 03 0a, EC=88 ba 2f
tsc: Refined TSC clocksource calibration: 2711.965 MHz
Switched to clocksource tsc
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
RAMDISK: gzip image found at block 0
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing unused kernel memory: 420K (c1695000 - c16fe000)
random: minised urandom read with 12 bits of entropy available
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
SCSI subsystem initialized
usbcore: registered new interface driver usb-storage
waiting module removal not supported: please upgrade
usbcore: deregistering interface driver usb-storage
waiting module removal not supported: please upgrade
usbcore: registered new interface driver asix
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
input: PC Speaker as /devices/platform/pcspkr/input/input8
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x1a impl RAID mode
ahci 0000:00:17.0: flags: 64bit ncq stag led clo only pio slum part ems sxs deso sadm sds apst 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xdf653000 port 0xdf653180 irq 16
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xdf653000 port 0xdf653280 irq 16
ata5: SATA max UDMA/133 abar m2048@0xdf653000 port 0xdf653300 irq 16
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-8: HGST HTS721010A9E630, JB0OA3P0, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      HGST HTS721010A9 JB0O PQ: 0 ANSI: 5
ata5: SATA link down (SStatus 4 SControl 300)
sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sda] 4096-byte physical blocks
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 sda5
sd 3:0:0:0: [sda] Attached SCSI disk
ide-gd driver 1.18
SGI XFS with security attributes, large block/inode numbers, no debug enabled
NTFS driver 2.1.30 [Flags: R/O MODULE].
JFS: nTxBlock = 8192, nTxLock = 65536
Key type dns_resolver registered
NET: Registered protocol family 33
Key type rxrpc registered
Key type rxrpc_s registered
kAFS: Red Hat AFS client v0.1 registering.
async_tx: api initialized (async)
raid6: mmxx1     6569 MB/s
raid6: mmxx2     6638 MB/s
raid6: sse1x1    5804 MB/s
raid6: sse1x2    6634 MB/s
raid6: sse2x1   11837 MB/s
raid6: sse2x2   14191 MB/s
raid6: using algorithm sse2x2 (14191 MB/s)
raid6: using ssse3x1 recovery algorithm
xor: automatically using best checksumming function:
   avx       : 27270.000 MB/sec
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
md: raid10 personality registered for level 10
md: raid1 personality registered for level 1
device-mapper: raid: Loading target version 1.5.2
md: linear personality registered for level -1
device-mapper: multipath: version 1.6.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
---------------------- END DMESG ---------------------

Outputs of 'lsmod'
------------------------- LSMOD --------------------

Module                  Size  Used by
dm_mirror               9355  0 
dm_region_hash          5023  1 dm_mirror
raid0                   6151  0 
dm_thin_pool           34357  0 
dm_bio_prison           2849  1 dm_thin_pool
multipath               4460  0 
dm_snapshot            22484  0 
dm_round_robin          1615  0 
dm_multipath           11953  1 dm_round_robin
scsi_dh                 3541  1 dm_multipath
linear                  3023  0 
dm_raid                13519  0 
raid1                  21288  1 dm_raid
dm_log                  6300  2 dm_mirror,dm_region_hash
dm_persistent_data     33034  1 dm_thin_pool
dm_bufio               10391  2 dm_snapshot,dm_persistent_data
raid10                 32738  1 dm_raid
dm_crypt               12144  0 
dm_zero                  783  0 
dm_mod                 56873  10 dm_mirror,dm_thin_pool,dm_snapshot,dm_multipath,dm_raid,dm_log,dm_persistent_data,dm_bufio,dm_crypt,dm_zero
raid456                48588  1 dm_raid
md_mod                 81076  7 raid0,multipath,linear,dm_raid,raid1,raid10,raid456
async_pq                3104  1 raid456
async_xor               2217  2 raid456,async_pq
xor                    17336  1 async_xor
async_memcpy             922  1 raid456
async_raid6_recov        865  1 raid456
raid6_pq               86536  2 async_pq,async_raid6_recov
async_tx                1298  5 raid456,async_pq,async_xor,async_memcpy,async_raid6_recov
cifs                  205923  0 
ncpfs                  33933  0 
minix                  19791  0 
udf                    59407  0 
crc_itu_t               1011  1 udf
af_rxrpc               56826  0 
dns_resolver            3144  0 
jfs                   126279  0 
reiserfs              161875  0 
configfs               15397  0 
ntfs                   70929  0 
coda                   21244  0 
xfs                   389786  0 
exportfs                2555  1 xfs
crc32c                  1092  1 
libcrc32c                626  2 dm_persistent_data,xfs
msdos                   4891  0 
isofs                  24157  0 
ide_gd_mod             11953  0 
sd_mod                 23307  0 
ahci                   19435  0 
libahci                15119  1 ahci
libata                120222  2 ahci,libahci
scsi_mod              106618  3 scsi_dh,sd_mod,libata
pcspkr                  1251  0 
xtkbd                   1578  0 
sunkbd                  2769  0 
newtonkbd               1410  0 
sermouse                2454  0 
edd                     5384  0 
asix                   14827  0 
libphy                 15127  1 asix
usbnet                 14564  1 asix
mii                     2803  2 asix,usbnet
usbhid                 26363  0 
sl811_hcd               7559  0 
isp116x_hcd            10521  0 
---------------------- END LSMOD ---------------------

Outputs of 'lspci'
------------------------- lspci --------------------

00:00.0 Host bridge: Intel Corporation: Unknown device 1910 (rev 07)
00:01.0 PCI bridge: Intel Corporation: Unknown device 1901 (rev 07)
00:04.0 Signal processing controller: Intel Corporation: Unknown device 1903 (rev 07)
00:14.0 USB Controller: Intel Corporation: Unknown device a12f (rev 31)
00:14.2 Signal processing controller: Intel Corporation: Unknown device a131 (rev 31)
00:16.0 Communication controller: Intel Corporation: Unknown device a13a (rev 31)
00:17.0 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev 31)
00:1c.0 PCI bridge: Intel Corporation: Unknown device a111 (rev f1)
00:1c.2 PCI bridge: Intel Corporation: Unknown device a112 (rev f1)
00:1c.4 PCI bridge: Intel Corporation: Unknown device a114 (rev f1)
00:1f.0 ISA bridge: Intel Corporation: Unknown device a150 (rev 31)
00:1f.2 Memory controller: Intel Corporation: Unknown device a121 (rev 31)
00:1f.3 Audio device: Intel Corporation: Unknown device a170 (rev 31)
00:1f.4 SMBus: Intel Corporation: Unknown device a123 (rev 31)
00:1f.6 Ethernet controller: Intel Corporation: Unknown device 15b7 (rev 31)
01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 13b1 (rev a2)
01:00.1 Audio device: nVidia Corporation: Unknown device 0fbc (rev a1)
02:00.0 Network controller: Intel Corporation: Unknown device 24f3 (rev 3a)
03:00.0 Class ff00: Realtek Semiconductor Co., Ltd.: Unknown device 525a (rev 01)
---------------------- END lspci ---------------------

Outputs of 'lspci -n'
------------------------- lspci -n --------------------

00:00.0 Class 0600: 8086:1910 (rev 07)
00:01.0 Class 0604: 8086:1901 (rev 07)
00:04.0 Class 1180: 8086:1903 (rev 07)
00:14.0 Class 0c03: 8086:a12f (rev 31)
00:14.2 Class 1180: 8086:a131 (rev 31)
00:16.0 Class 0780: 8086:a13a (rev 31)
00:17.0 Class 0104: 8086:2822 (rev 31)
00:1c.0 Class 0604: 8086:a111 (rev f1)
00:1c.2 Class 0604: 8086:a112 (rev f1)
00:1c.4 Class 0604: 8086:a114 (rev f1)
00:1f.0 Class 0601: 8086:a150 (rev 31)
00:1f.2 Class 0580: 8086:a121 (rev 31)
00:1f.3 Class 0403: 8086:a170 (rev 31)
00:1f.4 Class 0c05: 8086:a123 (rev 31)
00:1f.6 Class 0200: 8086:15b7 (rev 31)
01:00.0 Class 0300: 10de:13b1 (rev a2)
01:00.1 Class 0403: 10de:0fbc (rev a1)
02:00.0 Class 0280: 8086:24f3 (rev 3a)
03:00.0 Class ff00: 10ec:525a (rev 01)
---------------------- END lspci -n ---------------------

Content of '/proc/partitions'
------------------------- /proc/partitions --------------------

major minor  #blocks  name

   8        0  976762584 sda
   8        1     512000 sda1
   8        2     102400 sda2
   8        3     131072 sda3
   8        4    9156608 sda4
   8        5  966858752 sda5
---------------------- END /proc/partitions ---------------------

Content of '/proc/net/dev'
------------------------- /proc/net/dev --------------------

Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
  sit0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
    lo: 6363296    5064    0    0    0     0          0         0  6363296    5064    0    0    0     0       0          0
---------------------- END /proc/net/dev ---------------------

Content of '/proc/cmdline'
------------------------- /proc/cmdline --------------------

BOOT_IMAGE=kernel ramdisk_size=524288 init=/bin/minit CONSOLE=/dev/tty1 vga=0x317 root=/dev/ram0 rw quiet irqpoll pci=nomsi reboot=bios EIS_REINSTALLALLOW=0 EIS_DEBUGMODE=10 EIS_PALIGN=16384 EPE_ZEROMBR=1 EIS_OSDRIVE=SSD EIS_DOCP=1 EPE_SEC=ntlm EPE_LANGUAGE=ENU EPE_OSSEL=0 EPE_MBRID=005C1EB-0000000-0000000-0000000 initrd=/initrd.gz
---------------------- END /proc/cmdline ---------------------

ls -l /lib/modules/
------------------------- /lib/modules/ --------------------

total 1
drwxr-xr-x 3 root root 1024 Jan 27 10:52 3.14.4-gentoo
---------------------- END /lib/modules/ ---------------------

uname -r
------------------------- uname -r --------------------

3.14.4-gentoo
---------------------- END uname -r ---------------------

Content of '/tmp/pcitable'
------------------------- /tmp/pcitable --------------------

"0x00008086"  "0x00002822" "0xffffffff" "0xffffffff" "ahci" "Empirum detected Mass Storage Controller"
---------------------- END /tmp/pcitable ---------------------

------------------------- Debug Messages --------------------
10 uncrypt Reading disk.ini...
0 uncrypt Decrypting ...
0 uncrypt Decryption completed successfully.
5 syslog Catching pending kernel messages...
10 boot msg_enter
0 boot Mounting /proc
0 boot Mounting /sys
5 boot Performing udev initial scan...
5 boot Making udev managing hotplug events...
0 boot Choosing network mode...
0 boot Network mode: dhcp
10 syslog Starting klogd...
10 syslog Starting syslogd...
0 boot Setting up modul dependencies...
0 boot Setting hostname.
0 boot Checking if CPU has 64Bit capability...
0 boot CPU has 64Bit capability.
0 boot Preparing modules...
0 boot Updating modules.conf...
0 boot loading usb modules
10 lo entering runlevel
1 lo Setting up loopback interface...
1 lo Loopback interface successfully set up.
10 httpd entering runlevel
10 startx entering runlevel
1 httpd Configuring .htaccess
0 startx Starting Tiny-X for framebuffer devices Xfbdev...
1 httpd htpassword successfully configured
1 httpd setting environment-variable $DESKTOP_DEST
1 httpd httpd starting httpd
0 startx Setting display variable...
0 startx Starting Browser...
10 startx Browser executed successfully.
10 modsetup entering runlevel
0 modsetup Preparing modules directory...
0 modsetup Removing usb_storage...
0 modsetup Loading USB Net driver asix
0 modsetup Loading edd support...
0 modsetup Loading input device driver...
0 modsetup Installing driver sermouse
0 modsetup Installing driver newtonkbd
0 modsetup Installing driver sunkbd
0 modsetup Installing driver xtkbd
0 modsetup Installing driver pcspkr
0 modsetup Installing IDE drivers...
0 modsetup Installing NIC drivers...
0 modsetup Installing SCSI drivers...
0 modsetup Loading scsi low level drivers...
0 modsetup Loading and inserting scsi disk driver...
0 modsetup Loading and inserting ide disk driver...
0 modsetup Loading fs-support...
0 modsetup Installing driver msdos
0 modsetup Installing driver xfs
0 modsetup Installing driver coda
0 modsetup Installing driver ntfs
0 modsetup Installing driver configfs
0 modsetup Installing driver reiserfs
0 modsetup Installing driver jfs
0 modsetup Installing driver exportfs
0 modsetup Installing driver kafs
0 modsetup Installing driver udf
0 modsetup Installing driver minix
0 modsetup Installing driver ncpfs
0 modsetup Installing driver cifs
0 modsetup Installing driver isofs
0 modsetup Loading raid and lvm...
0 modsetup Installing driver raid456
0 modsetup Installing driver dm-zero
0 modsetup Installing driver dm-crypt
0 modsetup Installing driver raid10
0 modsetup Installing driver dm-persistent-data
0 modsetup Installing driver dm-log
0 modsetup Installing driver dm-raid
0 modsetup Installing driver linear
0 modsetup Installing driver dm-round-robin
0 modsetup Installing driver md-mod
0 modsetup Installing driver dm-snapshot
0 modsetup Installing driver multipath
0 modsetup Installing driver dm-mod
0 modsetup Installing driver raid1
0 modsetup Installing driver dm-thin-pool
0 modsetup Installing driver raid0
0 modsetup Installing driver dm-region-hash
0 modsetup Installing driver dm-multipath
0 modsetup Installing driver dm-mirror
0 modsetup Installing driver dm-bio-prison
0 modsetup Installing driver dm-bufio
0 modsetup Storage adapter: 0x00008086-0x00002822-0xffffffff-0xffffffff 
------------------------- End Debug Messages --------------------

------------------------- /etc/empirum_vars --------------------
EMP_PXECLIENT_DOTGATEWAY=""
EMP_PXECLIENT_DOTIP=""
EMP_PXECLIENT_DOTNETMASK=""
EMP_PXECLIENT_PXEUNICAST="1"
EMP_PXECLIENT_SERVICESERVERIP="xx.xx.xx.86"
EMP_MISC_INFOLEVEL="3"
EMP_MISC_PXEIMAGENAME="epe"
EMP_MISC_DISKTYP="EPE_AUTO"
EMP_MISC_MONITORING="YES"
EMP_MISC_DISKDIR="epe"
EMP_MISC_DEBUGLEVEL="3"
EMP_MISC_ISKERNELPARAMETER="YES"
EMP_MISC_ISOIMAGENAME="c:\temp\matrix42"
EMP_MISC_DISKBOOTLANGUAGE="en-US"
EMP_MISC_DISKBOOTTEMPLATE="Empirum"
EMP_MISC_PE2="PE2"
EMP_MISC_LATEST="Latest"
EMP_MISC_VERSION="Version"
EMP_MISC_OSSELECT="auto"
EMP_MISC_OSSELECTN="1"
EMP_MISC_DISKVER="1"
EMP_MISC_UPDATE="NO"
EMP_MISC_KERNELPARAMETER="ramdisk_size=524288"
EMP_MISC_INIT="/bin/minit"
EMP_MISC_CONSOLE="/dev/tty1"
EMP_MISC_VGA="0x317"
EMP_MISC_ROOT="/dev/ram0"
EMP_MISC_RW="rw"
EMP_MISC_QUIET="quiet"
EMP_MISC_IRQPOLL="irqpoll"
EMP_MISC_PCI="nomsi"
EMP_MISC_REBOOT="bios"
EMP_MISC_EIS_REINSTALLALLOW="0"
EMP_MISC_EIS_DEBUGMODE="10"
EMP_MISC_EIS_PALIGN="16384"
EMP_MISC_EPE_ZEROMBR="1"
EMP_MISC_EIS_OSDRIVE="SSD"
EMP_MISC_EIS_DOCP="1"
EMP_MISC_EPE_SEC="ntlm"
EMP_EMPINSTALLER_DATE="27.01.2016"
EMP_EMPINSTALLER_11:06="11:06"
EMP_EMPINSTALLER_PRODUCTVERSION="16.0.2"
EMP_EMPINSTALLER_PXEVERSION="87"
EMP_CLIENT_SUBNETMASK=""
EMP_CLIENT_SERVERIP="xx.xx.xx.86"
EMP_CLIENT_IPADDRESS=""
EMP_CLIENT_DISABLEDHCP="0"
EMP_CLIENT_DEFAULTGATEWAY=""
EMP_CLIENT_DOMPDCIP="xx.xx.xx.100"
EMP_CLIENT_SAVEUSER="1"
EMP_CLIENT_SHARECONFIGURATOR="CONFIGURATOR$"
EMP_CLIENT_USER="empirumagent"
EMP_CLIENT_FTP_USER=""
EMP_CLIENT_DOMPDC="dc1.domain.com"
EMP_CLIENT_SHARE="EMPINST$"
EMP_CLIENT_EMPSRVFQDN="domain.com"
EMP_CLIENT_CLIENTTYPE="LINUX"
EMP_CLIENT_DNSSERVER="xx.xx.xx.100"
EMP_CLIENT_LOGONDOMAIN=""
EMP_CLIENT_SERVER="empirum"
EMP_CLIENT_USEDHCPOPTIONS=""
EMP_CLIENT_EMPSRVLONG="empirum.domain.com"
EMP_CLIENT_USEDHCPOPTIONSB="NO"
EMP_CLIENT_PASSWORD="XXXX"
EMP_CLIENT_LOGONTODOMAIN="NO"
EMP_CLIENT_FTP_PASSWORD=""
EPE_ZEROMBR=1
EPE_SEC=ntlm
EPE_LANGUAGE=ENU
EPE_OSSEL=0
EPE_MBRID=005C1EB-0000000-0000000-0000000
------------------------- End /etc/empirum_vars --------------------

------------------------- /etc/profile --------------------
export PS1="Client # "

alias la="ls -la"

export PATH=$PATH:/bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin

export HOME=/root


export localout=/dev/tty1

export LANGEXT=enu
export CPU_ARCH=x64
export ZEROMBR=1
export SEC=ntlm
export LANGUAGE=ENU
export OSSEL=0
export MBRID=005C1EB-0000000-0000000-0000000
export DESKTOP_DEST=/var/www/data/select/empirum.html
export DESKTOP_SELECT=/var/www/data/empirumsrcselect.html
export DESKTOP_PROMPT_INF=/var/www/data/select/cgi-bin/prompt.inf
export DISPLAY=127.0.0.1:0.0
------------------------- End /etc/profile --------------------

------------------------- EPE_Info.txt --------------------
--------------------------------------------------------------------------------
v3.74 - 03.007   Date: 28.07.2015, NST, UNR
	Modification:	using credentials for DiskImaging
-------------------------------------------------------------------------------
v3.73 - 03.006   Date: 20.05.2015, AWF
	Modification:	initrd 	runlevel getimage Windows 10 support added

-------------------------------------------------------------------------------
v3.72 - 03.005   Date: 13.04.2015, OCT
	Modification:	initrd 	- initrd runtime size 512 MB
							- new mount.davfs and umount.davfs binaries
							- changes in logon and network scripts
							- davfs2.conf changed
							- root certificate for webdav
							- python files removed 
							- EIS bugfix - runlevel prepare: priority of environment variables 
											from cmdline and OS.ini switched
							- runlevel prepare # priority of kernel parameters vs. variables changed 
								-> variables are higher priorised than kernel parameters
	Prerequisites:	v16.0 with HFs for PRB27544 & PRB27574 or v15.1.10
	PAY ATTENTION: Special EPE version!!! You have to set the kernel parameter ramdisk_size to 524288 
				to be able to boot this EPE version.
-------------------------------------------------------------------------------
v3.71 - 03.004   Date: 16.02.2015, FLL
	Modification:	initrd 	- Added /var/www/data/errors/err500.html
							- Added /var/www/data/errors/err404.html
-------------------------------------------------------------------------------
v3.70 - 03.003   Date: 16.12.2014, OCT
	Modification:	initrd 	- Added wget as static binary
							- Support for networking in cloud environment
-------------------------------------------------------------------------------
v3.69 - 03.002   Date: 30.10.2014, OCT
	Modification:	Kernel & modules.tgz: - Added MSI Support
											Added various Vendor compatibility Modules for Notebooks
											Added Intel HD Graphics DRM support

-------------------------------------------------------------------------------
v3.68 - 03.001   Date: 16.10.2014, OCT ESC
	Modification:	Kernel & modules.tgz: - Added MSI Support
											Added various Vendor compatibility Modules for Notebooks
											Added Intel HD Graphics DRM support

					EFI Grub bootloader:	grub.cfg modified (gfxpayload, gfxmode)
											Backgroundimage changed
-------------------------------------------------------------------------------
v3.67 - 02.026   Date: 17.09.2014, OCT JBD
	Modification:	Kernel & modules.tgz: - Added MMC modules to support Tablets 
											with MMC disks (Dell Venue 11 Pro). 
					initrd: - Resized RAM disk from 96 MB to 125 MB 
							- added eMMC modules load to seldest script
							- Changed all the pxe messages in runlevel scripts etc
					postsetup.inf: Added new postsetup.inf script for grub2 support	
------------------------------------------------------------------------------
v3.65 - 02.024   Date: 08.09.2014, OCT
	Bugfix 39018: 	Added vendor driver r8152 as external driver
	Modification:	KERNEL & modules.tgz
------------------------------------------------------------------------------
v3.64 - 02.023   Date: 01.09.2014, OCT
	Bugfix 39018: 	Added driver support MPT3SAS and i2c-i801 (Intel 9 Series SMBUS)
	Modification:	KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.63 - 02.022   Date: 08.07.2014, OCT
	Bugfix 38690	: Added OS variable for WIN8(.1) support to runlevel getimage 
					(fixed custom script including issue)
	Modification:	initrd -> /etc/minit/getimage/run2
-------------------------------------------------------------------------------
v3.62 - 02.021   Date: 03.06.2014, OCT
	Bugfix 38462 & 38464: 	- USB module ehci-pci will now be loaded additional to the default usb modules
							to handle USB ports on HWs like Dell Optiplex 790 or ThinkPad from Lenovo. 
							Without this fix you cannot use USB keyboards during the EPE phase
							-> No keyboard -> No Selfprovisioning!
							- Added OS variable for WIN8(.1) support to runlevel getimage 
							(fixed custom script including issue)
	Modification:	initrd -> /etc/minit/boot/run2
-------------------------------------------------------------------------------
v3.61 - 02.020   Date: 19.05.2014, ESC
	EFI Firmware Support:	- EFI Firmware Support activated
							- SGdisk integrated
							- KernelUpdate to 3.14.4-gentoo
							- Multiple USB NIC Adapter Drivers added
	Modification:	initrd, KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.60 - 02.019   Date: 30.08.2013, OCT
	Bugfix 35156,35157:	- KernelUpdate to 3.10.7-gentoo with r8152 and alx module from vendors 
						and patched igb and forcedeth modules
						- New kernel parameter EPE_SWRAIDTYPE
	Modification:	initrd, KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.59 - 02.018   Date: 14.06.2013, OCT
	Bugfix 34085:	KernelUpdate to 3.9.5-gentoo with r8152 and alx module from 
					vendors and patched igb and forcedeth modules
	Modification:	KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.58 - 02.017   Date: 10.06.2013, OCT
	Bugfix 34121:	PRB25301: Added new driver RTL8152B USB Nic for Panasonic FZ-G1 for customer - CUSTOMER VERSION
					---
					Hint: Not implemented into the product because the driver will be added into 
					the linux kernel in version 3.10
					---
	Modification:	modules.tgz
-------------------------------------------------------------------------------
v3.57 - 02.016   Date: 27.02.2013, FLL
	Bugfix 32743:	PRB24990: Windows 7 Installation with 2 RAIDs
	Modification:	initrd --> create /bin/raidsetupex.sh
-------------------------------------------------------------------------------
v3.56 - 02.015   Date: 15.02.2013, OCT
	Bugfix 32743:	Kernel update to 3.7.7-gentoo with patches for forcedeth, igb and alx drivers
	Modification:	KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.55 - 02.014   Date: 25.01.2013, OCT
	Bugfix 32533:	PRB24978: igb driver patched + Kernel update to 3.7.2-gentoo
	Modification:	KERNEL + modules.tgz
------------------------- End EPE_Info.txt --------------------
SPY:

Code: Select all

[STO_0]
vendorid=0x00008086
deviceid=0x00002822
subvendorid=0xffffffff
subdeviceid=0xffffffff


turbo
Posts: 94
Joined: 01. Jun 2005, 22:07
Location: NRW
Contact:

Re: NetSpy mit neuem Client: [networking] no suitable interf

Post by turbo » 27. Jan 2016, 14:55

Hallo

wenn ich das richitig sehe

pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000

ist dort eine Intel i219LM Netzwerkkarte Verbaut.

Das Aktuelle EPE hat probleme mit der Nic siehe auch viewtopic.php?f=4&t=14546&sid=03f30bad5 ... 3fd3b854a7

Matrix ist da an einer Problemlösung dran, laut support gibt es probleme mit den IDs der karte und "Linux".

Entweder warten auf Matrix ~ende Februar, oder als workaround mit USB-Netzwerkkarte.

Chef
Posts: 21
Joined: 10. Jul 2015, 10:36
Contact:

Re: NetSpy mit neuem Client: [networking] no suitable interf

Post by Chef » 27. Jan 2016, 16:47

Hallo,

vielen Dank für die schnelle Antowort - dann warten wir mal bis nächsten Monat... :(

seipf
Posts: 101
Joined: 13. Sep 2013, 12:00
Contact:

Re: NetSpy mit neuem Client: [networking] no suitable interf

Post by seipf » 16. Feb 2016, 14:24

Wir haben das gleiche Problem mit einem Dell Precision Tower 3620.

Ich hoffe dass die Unterstützung für Skylake CPUs so schnell wie möglich kommt.

Viele Grüße
Florian

###Ben###
Posts: 37
Joined: 05. Oct 2012, 12:00
Contact:

Re: NetSpy mit neuem Client: [networking] no suitable interf

Post by ###Ben### » 16. Aug 2016, 11:10

Hallo,

habe das gleiche Problem mit einem Fujitsu Lifebook E556. Netzwerkkarte: Intel I217/I218/I219

Gibt's da schon eine Lösung?


EDIT: Ok, Stichwort "Skylake" und EPE4 werde ich jetzt mal versuchen. :)


Danke & Gruß
Ben

kaestners
Posts: 59
Joined: 24. Apr 2007, 11:58
Location: Neustadt
Contact:

Re: NetSpy mit neuem Client: [networking] no suitable interf

Post by kaestners » 31. Aug 2016, 08:26

Hallo,

gibt es schon eine Lösung?

Gruß
mfg,
kaestners :wink:
__________________________________
Empirum V18.0.2


Post Reply

Return to “OS Installer”

Who is online

Users browsing this forum: No registered users and 6 guests