Ein neues Problem tritt beim Installieren von Fujitsu Esprimo Q556 auf:
Er möchte die Partitionen nicht von MBR auf GPT umstellen und bleibt bei folgender Stelle stehen:
Code: Select all
09.06.2016 11:12:44 [Eis32] Disk 0 will be reset to GPT...
09.06.2016 11:12:44 [Eis32] Disk 0 is MBR partitioned...
09.06.2016 11:12:44 [Eis32] Deleting partitions...
09.06.2016 11:12:39 [Eis32] SSD Disk/MB: 0/244198 parttypes/MB: 7/2049 15/242146 0/0 0/0 0/0 0/0 free/used: 0/244195
09.06.2016 11:12:39 [Eis32] Preparing hard disks.
09.06.2016 11:12:39 [Eis32] Boot from extracted WinPE on Matrix42 service partition
09.06.2016 11:12:39 [Eis32] Entering EFI/GPT mode
09.06.2016 11:12:39 [Eis32] Target device for OS-Installation: /dev/sda
09.06.2016 11:12:38 [Eis32] TCP/IP address: DHCP
09.06.2016 11:12:38 [Eis32] Domain/Workgroup: Dom: XXX
09.06.2016 11:12:38 [Eis32] Computer name: XXXX
09.06.2016 11:12:38 [Eis32] Image name: win10 x64 PRO de-DE SP0
09.06.2016 11:12:38 [Eis32] Total elapsed time: 0 min
09.06.2016 11:12:38 [Eis32] Connected Empirumserver: XXXX IP: 192.168.2.230
09.06.2016 11:12:38 [Eis32] Detected boot method: UEFI
09.06.2016 11:12:38 [Eis32] Current client mac address: 901B0E956AEF IP:
09.06.2016 11:12:38 [Eis32] Empirum OS-Installation script Ver. 4.1.9.133
09.06.2016 11:12:38 [Eis32] Empirum Eis32 Ver. 16.0.2.41
09.06.2016 11:12:12 [MES] Mount Empirum Server done
09.06.2016 11:12:12 [MES] /mounts/PXESRV_EmpInst is ok
09.06.2016 11:12:12 [MES] /mounts/PXESRV_EmpInst is linked
09.06.2016 11:12:12 [MES] /mounts/Configurator is mounted
09.06.2016 11:12:11 [MES] /mounts/EmpInst is mounted
09.06.2016 11:12:11 [MES] The mount-command returned 0 with options 'cred=/var/empirum/cred,file_mode=0755,gid=root,uid=root,noserverino,nounix,cache=none,sec=ntlm' and interation '0'
09.06.2016 11:12:09 [MES] Mount Empirum Server (mount-empirumserver.sh Vers. 4.1.9.133)...
09.06.2016 11:12:09 [EPE40] Service server ip-address is: 192.168.2.230 source: cmdline
09.06.2016 11:12:09 [EPE40] Empirum server ip-address is: 192.168.2.230 source:
09.06.2016 11:12:09 [EPE40] Client ip-address is: 192.168.2.68
09.06.2016 11:12:09 [EPE40] Client mac-address is: 901B0E956AEF
09.06.2016 11:12:09 [EPE40] Client network interface is up
09.06.2016 11:12:09 [EPE40] Running EPE version: 4.1.9.133
09.06.2016 11:12:09 [EPE40 ] EPE globals version is: EPE40
09.06.2016 11:12:09 [EPE40 ] EPE globals (set-epeglobals.sh) available
Jedoch lief es bei ca. 5 Rechnern gleicher Baureihe problemlos durch. Auch die DELL Latitude E5470 laufen problemlos im UEFI Mode durch.
Wer kann Tipps geben?