Fehler beim Partitionen erstellen

Moderator: jknoth

Post Reply
MarcW
Posts: 283
Joined: 09. Jan 2008, 08:57
Contact:

Fehler beim Partitionen erstellen

Post by MarcW » 09. Jul 2019, 16:11

Hallo zusammen,

Ich habe ein Problem mit einem Rechner, der mit WinPE aufgesetzt werden soll.
2 Festplatten (M.2 HDD mit 250 GB als Nr. 1, 1TB SATA als Nr. 2)
Bei der Partitionierung wird abgebrochen, mit diesem Log (siehe unten):

Ein baugleicher Rechner, mit absolut gleichem "Inhalt" funktioniert wunderbar.
M.2 Festplatte wurde getauscht, Bios zurückgesetzt, Rechner aus Empirum gelöscht und wieder neu angelegt.
Dies ist mein Pakete-Testrechner, den ich schon zig 1000x neu aufgesetzt habe.
Ich meine, dass das Problem mit dem Update auf DiskPartition 3.13 aufgetreten ist, vorher war 3.10.
Ein Rückgang auf 3.10 brachte dann aber gleiches Ergebnis.

Wo ist da der Fehler?

Gruß Marc

Code: Select all

2019-07-09 15:26:32.501 [Information] [Process.OutputReadNotifyUser] Start partitioning...
2019-07-09 15:26:33.486 [Information] [Process.OutputReadNotifyUser] Read the following variable values for Disk 0 from the Computer.ini: 
2019-07-09 15:26:33.486 [Information] [Process.OutputReadNotifyUser] SizeSystemPartition: 50 
2019-07-09 15:26:33.486 [Information] [Process.OutputReadNotifyUser] SizeDataPartition: 50 
2019-07-09 15:26:33.486 [Information] [Process.OutputReadNotifyUser] InterpretSizeInputAsProcentage: 1 
2019-07-09 15:26:33.486 [Information] [Process.OutputReadNotifyUser] MinimumSystemPartitionSize: 100 
2019-07-09 15:26:33.486 [Information] [Process.OutputReadNotifyUser] PreferFastDisk: 1 
2019-07-09 15:26:33.486 [Information] [Process.OutputReadNotifyUser] ClearAllDisks: 0 
2019-07-09 15:26:33.486 [Information] [Process.OutputReadNotifyUser] Information before DiskPartitioning ...
2019-07-09 15:26:33.486 [Information] [Process.OutputReadNotifyUser] Current hard disk information:
2019-07-09 15:26:33.486 [Information] [Process.OutputReadNotifyUser] ==============================
2019-07-09 15:26:35.611 [Information] [Process.OutputReadNotifyUser] 
2019-07-09 15:26:35.626 [Information] [Process.OutputReadNotifyUser] Number Friendly Name Serial Number                    HealthStatus         OperationalStatus      Total Size Partition 
2019-07-09 15:26:35.626 [Information] [Process.OutputReadNotifyUser]                                                                                                              Style     
2019-07-09 15:26:35.626 [Information] [Process.OutputReadNotifyUser] ------ ------------- -------------                    ------------         -----------------      ---------- ----------
2019-07-09 15:26:35.720 [Information] [Process.OutputReadNotifyUser] 1      SAMSUNG MZ... 0025_3883_91C0_2AA5.             Healthy              Online                  238.47 GB RAW       
2019-07-09 15:26:35.736 [Information] [Process.OutputReadNotifyUser] 0      TOSHIBA MQ...            78TLT4CET             Healthy              Online                  931.51 GB GPT       
2019-07-09 15:26:35.736 [Information] [Process.OutputReadNotifyUser] 
2019-07-09 15:26:35.736 [Information] [Process.OutputReadNotifyUser] 
2019-07-09 15:26:35.736 [Information] [Process.OutputReadNotifyUser] Current partition information:
2019-07-09 15:26:35.736 [Information] [Process.OutputReadNotifyUser] ==============================
2019-07-09 15:26:35.767 [Information] [Process.OutputReadNotifyUser] Current volume information:
2019-07-09 15:26:35.767 [Information] [Process.OutputReadNotifyUser] ==============================
2019-07-09 15:26:35.798 [Information] [Process.OutputReadNotifyUser] 
2019-07-09 15:26:35.814 [Information] [Process.OutputReadNotifyUser] DriveLetter FriendlyName FileSystemType DriveType HealthStatus OperationalStatus SizeRemaining Size
2019-07-09 15:26:35.814 [Information] [Process.OutputReadNotifyUser] ----------- ------------ -------------- --------- ------------ ----------------- ------------- ----
2019-07-09 15:26:35.814 [Information] [Process.OutputReadNotifyUser] D                        Unknown        CD-ROM    Healthy      Unknown                     0 B  0 B
2019-07-09 15:26:35.814 [Information] [Process.OutputReadNotifyUser] 
2019-07-09 15:26:35.814 [Information] [Process.OutputReadNotifyUser] 
2019-07-09 15:26:36.017 [Information] [Process.OutputReadNotifyUser] Found disk with NVMe bus type.
2019-07-09 15:26:36.032 [Information] [Process.OutputReadNotifyUser] Search volume with assigned drive letter C.
2019-07-09 15:26:36.111 [Information] [Process.OutputReadNotifyUser] Could not find volume with drive letter C. No need to remove it.
2019-07-09 15:26:36.111 [Information] [Process.OutputReadNotifyUser] Search volume with assigned drive letter S.
2019-07-09 15:26:36.126 [Information] [Process.OutputReadNotifyUser] Could not find volume with drive letter S. No need to remove it.
2019-07-09 15:26:36.126 [Information] [Process.OutputReadNotifyUser] Search volume with assigned drive letter T.
2019-07-09 15:26:36.142 [Information] [Process.OutputReadNotifyUser] Could not find volume with drive letter T. No need to remove it.
2019-07-09 15:26:36.142 [Information] [Process.OutputReadNotifyUser] Finished volume search.
2019-07-09 15:26:36.329 [Information] [Process.OutputReadNotifyUser] Clearing disk 1 ...
2019-07-09 15:26:36.439 [Information] [Process.OutputReadNotifyUser] Initialising disk 1 with standard GPT layout ...
2019-07-09 15:26:36.861 [Information] [Process.OutputReadNotifyUser] Create WinRE Partition with size 300 MB
2019-07-09 15:26:37.048 [Error] [Process.ErrorReadNotifyUser] New-Partition : Not Supported
2019-07-09 15:26:37.048 [Error] [Process.ErrorReadNotifyUser] Activity ID: {9315f9b2-4a25-4e5c-a056-b8caab8a41b6}
2019-07-09 15:26:37.048 [Error] [Process.ErrorReadNotifyUser] At \\empirumserver.domain\Configurator$\Packages\Matrix42\OsPackages\DiskPartitioning\3.13\install\install.ps1:79 
2019-07-09 15:26:37.048 [Error] [Process.ErrorReadNotifyUser] char:9
2019-07-09 15:26:37.048 [Error] [Process.ErrorReadNotifyUser] +         New-Partition -DiskNumber $disknum -GptType '{de94bba4-06d1-4 ...
2019-07-09 15:26:37.048 [Error] [Process.ErrorReadNotifyUser] +         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2019-07-09 15:26:37.048 [Error] [Process.ErrorReadNotifyUser]     + CategoryInfo          : InvalidOperation: (StorageWMI:ROOT/Microsoft/Windows/Storage/MSFT_Disk) [New-Partition], 
2019-07-09 15:26:37.048 [Error] [Process.ErrorReadNotifyUser]     CimException
2019-07-09 15:26:37.048 [Error] [Process.ErrorReadNotifyUser]     + FullyQualifiedErrorId : StorageWMI 1,New-Partition
2019-07-09 15:26:37.048 [Error] [Process.ErrorReadNotifyUser]  
2019-07-09 15:26:37.111 [Error] [Process.ErrorReadNotifyUser] New-Partition : Not Supported
2019-07-09 15:26:37.111 [Error] [Process.ErrorReadNotifyUser] Activity ID: {8d19c9ec-1ef9-4915-9ce1-a5a64583edf0}
2019-07-09 15:26:37.111 [Error] [Process.ErrorReadNotifyUser] At \\empirumserver.domain\Configurator$\Packages\Matrix42\OsPackages\DiskPartitioning\3.13\install\install.ps1:47 
2019-07-09 15:26:37.111 [Error] [Process.ErrorReadNotifyUser] char:21
2019-07-09 15:26:37.111 [Error] [Process.ErrorReadNotifyUser] + ... Partition = New-Partition -DiskNumber $disknum -GptType '{de94bba4-06 ...
2019-07-09 15:26:37.111 [Error] [Process.ErrorReadNotifyUser] +                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2019-07-09 15:26:37.111 [Error] [Process.ErrorReadNotifyUser]     + CategoryInfo          : InvalidOperation: (StorageWMI:ROOT/Microsoft/Windows/Storage/MSFT_Disk) [New-Partition], 
2019-07-09 15:26:37.111 [Error] [Process.ErrorReadNotifyUser]     CimException
2019-07-09 15:26:37.111 [Error] [Process.ErrorReadNotifyUser]     + FullyQualifiedErrorId : StorageWMI 1,New-Partition
2019-07-09 15:26:37.111 [Error] [Process.ErrorReadNotifyUser]  
2019-07-09 15:26:37.142 [Information] [PeAgentService.SendPxeLogMessage] SendPxeLogMessage called with log message: Failed to set UUID 42000000-4242-4242-4242-100000000002 for storage device on drive S: 
(Opening a drive 'S:' is not possible.
Error: 2 The system cannot find the file specified )
2019-07-09 15:26:37.142 [Information] [ConfiguratorService.GetValueWithDefault] [ConfiguratorDebug] Returned resolved value: '10.138.10.13' for key 'Matrix42.Platform.Service.Extension.PeAgent.PxeServerIp' 
2019-07-09 15:26:37.158 [Error] [Process.ErrorReadNotifyUser] ExitWithCodeMessage : An error occurred while trying to partition the disk. The error message was: Failed to set UUID 
2019-07-09 15:26:37.158 [Error] [Process.ErrorReadNotifyUser] 42000000-4242-4242-4242-100000000002 for storage device on drive S: 
2019-07-09 15:26:37.158 [Error] [Process.ErrorReadNotifyUser] (Opening a drive 'S:' is not possible.
2019-07-09 15:26:37.158 [Error] [Process.ErrorReadNotifyUser] Error: 2 The system cannot find the file specified )
2019-07-09 15:26:37.158 [Error] [Process.ErrorReadNotifyUser] At \\empirumserver.domain\Configurator$\Packages\Matrix42\OsPackages\DiskPartitioning\3.13\install\install.ps1:562 
2019-07-09 15:26:37.158 [Error] [Process.ErrorReadNotifyUser] char:9
2019-07-09 15:26:37.158 [Error] [Process.ErrorReadNotifyUser] +         ExitWithCodeMessage 500 "An error occurred while trying to pa ...
2019-07-09 15:26:37.158 [Error] [Process.ErrorReadNotifyUser] +         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2019-07-09 15:26:37.158 [Error] [Process.ErrorReadNotifyUser]     + CategoryInfo          : NotSpecified: (:) [Write-Error], WriteErrorException
2019-07-09 15:26:37.158 [Error] [Process.ErrorReadNotifyUser]     + FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorException,ExitWithCodeMessage
2019-07-09 15:26:37.158 [Error] [Process.ErrorReadNotifyUser]  
2019-07-09 15:26:37.220 [Information] [PowerShellExecutor.ExecutePowerShellScript] Finished PowerShell process.
2019-07-09 15:26:37.220 [Information] [PowerShellExecutor.ExecutePowerShellScript] Exit code = 500
2019-07-09 15:26:37.220 [Warning] [PeAgent.ProcessOsPackageExecution] Error at installing package Matrix42\OsPackages\DiskPartitioning\3.13: New-Partition : Not Supported
Activity ID: {9315f9b2-4a25-4e5c-a056-b8caab8a41b6}
At \\empirumserver.domain\Configurator$\Packages\Matrix42\OsPackages\DiskPartitioning\3.13\install\install.ps1:79 
char:9
+         New-Partition -DiskNumber $disknum -GptType '{de94bba4-06d1-4 ...
+         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (StorageWMI:ROOT/Microsoft/Windows/Storage/MSFT_Disk) [New-Partition], 
    CimException
    + FullyQualifiedErrorId : StorageWMI 1,New-Partition
 
New-Partition : Not Supported
Activity ID: {8d19c9ec-1ef9-4915-9ce1-a5a64583edf0}
At \\empirumserver.domain\Configurator$\Packages\Matrix42\OsPackages\DiskPartitioning\3.13\install\install.ps1:47 
char:21
+ ... Partition = New-Partition -DiskNumber $disknum -GptType '{de94bba4-06 ...
+                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (StorageWMI:ROOT/Microsoft/Windows/Storage/MSFT_Disk) [New-Partition], 
    CimException
    + FullyQualifiedErrorId : StorageWMI 1,New-Partition
 
An error occurred while trying to partition the disk. The error message was: Failed to set UUID 
42000000-4242-4242-4242-100000000002 for storage device on drive S: 
(Opening a drive 'S:' is not possible.
Error: 2 The system cannot find the file specified )
At \\empirumserver.domain\Configurator$\Packages\Matrix42\OsPackages\DiskPartitioning\3.13\install\install.ps1:562 
char:9
+         ExitWithCodeMessage 500 "An error occurred while trying to pa ...
+         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [Write-Error], WriteErrorException
    + FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorException,ExitWithCodeMessage


User avatar
Rumpelstilzchen
Posts: 36
Joined: 25. Jan 2018, 16:15
Contact:

Re: Fehler beim Partitionen erstellen

Post by Rumpelstilzchen » 09. Jul 2019, 18:08

Hi MarcW,

versuche es mal mit der "optionalen" Variable "ClearAllDisks".
Estelle unter DiskPartitioning eine Nummern-Variable "ClearAllDisks" und setze diese für deinen Client auf "1".

DiskPartitioning wählt die Platte 1, weil du ja "PreferFastDisk: 1" konfiguriert hast, jedoch sind auf der anderen Platte 0 wohl noch Systempartitionen (WindowsRE) von einem vorausgegangenen Versuch.
Heute backe ich morgen braue ich: Fehler könnten sich einschleichen und die Aussagen sind zu überprüfen - ich übernehme keine Verantwortung für das geschriebene Wort

MarcW
Posts: 283
Joined: 09. Jan 2008, 08:57
Contact:

Re: Fehler beim Partitionen erstellen

Post by MarcW » 10. Jul 2019, 09:28

Ich hatte schon beide Platten mit Paragon USB-Stick platt gemacht, alle Partitionen gelöscht, alle Daten gelöscht.

MarcW
Posts: 283
Joined: 09. Jan 2008, 08:57
Contact:

Re: Fehler beim Partitionen erstellen

Post by MarcW » 11. Jul 2019, 09:03

Guten Morgen,

wenn ich die SATA-Platte mit 1 TB abstecke, funktioniert es.

ArthurDent
Posts: 60
Joined: 19. Dec 2018, 17:22
Contact:

Re: Fehler beim Partitionen erstellen

Post by ArthurDent » 06. Oct 2022, 15:46

Anfängerfrage, aber woher kommt das Log? :?

Ich hab ein ähnliches Problem. Mit DebugView bin ich auf folgendes gestoßen:

Code: Select all

[3220] MATRIXPXE:              : SplitUUID - Found curly brackets in message '{474ea6b3-ab18-872e-0347-651eb98eb6f3} [PEAgent] [WinPE] Failed to set UUID 42000000-4242-4242-4242-100000000002 for storage device on drive S: 
[3220] (Opening a drive 'S:' is not possible.
[3220] Error: 2 The system cannot find the file specified )'. Extracted UUID '{474ea6b3-ab18-872e-0347-651eb98eb6f3}'. Remaining message '{474ea6b3-ab18-872e-0347-651eb98eb6f3} [PEAgent] [WinPE] Failed to set UUID 42000000-4242-4242-4242-100000000002 for storage device on drive S: 
[3220] (Opening a drive 'S:' is not possible.
[3220] Error: 2 The system cannot find the file specified )'
Das wird mir auch so im MMC Log angezeigt. Ich kann nur nichts damit anfangen. Jemand eine Idee dazu?

ArthurDent
Posts: 60
Joined: 19. Dec 2018, 17:22
Contact:

Re: Fehler beim Partitionen erstellen

Post by ArthurDent » 07. Oct 2022, 15:52

ArthurDent wrote: 06. Oct 2022, 15:46 Anfängerfrage, aber woher kommt das Log? :?
Kann es mir inzwischen selbst beantworten. Im Empirum Installationsordner EmpInst\Wizard\OS\WinPeStatus

Post Reply

Return to “OS Installer”

Who is online

Users browsing this forum: No registered users and 3 guests