Page 1 of 1

Lenovo X1 Yoga EPE Fehler: [MES] Unable to find EMPIRUMSERVERIP ''

Posted: 13. Nov 2019, 11:09
by ray311073
Hallo,

wir haben aktuell ein Problem mit einem X1 Yoga, welches sich absolut nicht installieren lassen will. Wir haben zeitgleich an diesem Standort mehrere andere Geräte (Thinkpads usw.) problemlos aufgesetzt.

Kennt Jemand diese [MES] Unable to find EMPIRUMSERVERIP '' Meldung ? Für was steht denn [MES] ?! Sieht so aus als ob zwischen den beiden ' ' eigentlich die IP Adresse stehen sollte, diese aber "leer" ist ?! Obwohl weiter unten die richtige IP eindeutig angezeigt wird.

Eingesetzt wird Empirum V19, andere Clients können wir wie erwähnt problemlos installieren.

(Servername , MAC und IP Adressen habe ich gegen Dummy Werte ersetzt, aber sowohl die IPs als auch der FQDN Des Servers werden im Logfile korrekt angezeigt.)

Code: Select all

13.11.2019 09:37:35	[MES] bin dev etc home init lib lib32 linuxrc media mnt mounts opt proc root run sbin srv sys tmp usr var Error ***: Unable to find server ip!
13.11.2019 09:37:35	[MES] aaa.bbb.ccc is NOT dns based loadbalanced
13.11.2019 09:37:35	[MES] Unable to find EMPIRUMSERVERIP ''
13.11.2019 09:32:44	[MES] Mount Empirum Server (mount-empirumserver.sh Vers. 4.7.10.864)...
13.11.2019 09:32:44	[MES] Using protocol SMB
13.11.2019 09:32:44	[EPE40] Client ip-address is: 1.2.3.4
13.11.2019 09:32:44	[EPE40] Empirum server ip-address is: 1.2.3.5 source:
13.11.2019 09:32:44	[EPE40] Service server ip-address is: 1.2.3.5 source: cmdline
13.11.2019 09:32:44	[EPE40] Client network interface is up
13.11.2019 09:32:44	[EPE40] Client mac-address is: 0123456789ABC
13.11.2019 09:32:44	[EPE40 ] EPE globals (set-epeglobals.sh) available
13.11.2019 09:32:44	[EPE40 ] EPE globals version is: EPE40
13.11.2019 09:32:44	[EPE40] Running EPE version: 4.7.10.864
13.11.2019 09:32:44	[EPE40 ] EPE globals version is: EPE40
13.11.2019 09:32:44	[DHCPCD ] start read-dhcpoptions
13.11.2019 09:32:44	[EPE40 ] EPE globals (set-epeglobals.sh) available
13.11.2019 09:32:44	[EPE40 ] EPE globals version is: EPE40
13.11.2019 09:32:44	[EPE40 ] EPE globals (set-epeglobals.sh) available

Bin für jeden Tipp dankbar :)

Gruß Heiko