Habe einen alten Hp Compaq nx6110 und EPE findet keinen Treiber für die Broadcom Karte
ich habe schon den Kernel Parameter EPE_LOAD_MODULE=broadcom hinzugefügt aber es funktioniert nicht
Im Log steht auch die richte Karte aber weis auch nicht warum er dann meldet das kein Interface aktiv ist.
Vielleicht kann mir wer von euch helfen
Hier das EPE log
Code: Select all
Begin time for EPE logging: Tue Mar 16 14:24:27 GMT 2010
Outputs of 'dmesg'
------------------------- DMESG --------------------
orting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080926
ACPI: setting ELCR to 0200 (from 0c00)
net_namespace: 636 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [C002] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xd0400000-0xd047ffff]
pci 0000:00:02.0: reg 14 io port: [0x7000-0x7007]
pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0480000-0xd04bffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xd0500000-0xd057ffff]
pci 0000:00:1d.0: reg 20 io port: [0x2000-0x201f]
pci 0000:00:1d.1: reg 20 io port: [0x2020-0x203f]
pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
pci 0000:00:1d.3: reg 20 io port: [0x2060-0x207f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0580000-0xd05803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.2: reg 10 io port: [0x2100-0x21ff]
pci 0000:00:1e.2: reg 14 io port: [0x2200-0x223f]
pci 0000:00:1e.2: reg 18 32bit mmio: [0xd0581000-0xd05811ff]
pci 0000:00:1e.2: reg 1c 32bit mmio: [0xd0582000-0xd05820ff]
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.2: PME# disabled
pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff]
pci 0000:00:1e.3: reg 14 io port: [0x2500-0x257f]
pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.3: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x2580-0x258f]
pci 0000:02:04.0: reg 10 32bit mmio: [0xd0000000-0xd0000fff]
pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:02:06.0: reg 10 32bit mmio: [0xd0001000-0xd0001fff]
pci 0000:02:06.0: supports D1 D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.0: PME# disabled
pci 0000:02:06.2: reg 10 32bit mmio: [0xd0002000-0xd00027ff]
pci 0000:02:06.2: reg 14 32bit mmio: [0xd0004000-0xd0007fff]
pci 0000:02:06.2: supports D1 D2
pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.2: PME# disabled
pci 0000:02:06.3: reg 10 32bit mmio: [0xd0008000-0xd0009fff]
pci 0000:02:06.3: supports D1 D2
pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.3: PME# disabled
pci 0000:02:06.4: reg 10 32bit mmio: [0xd000a000-0xd000a0ff]
pci 0000:02:06.4: reg 14 32bit mmio: [0xd000b000-0xd000b0ff]
pci 0000:02:06.4: reg 18 32bit mmio: [0xd000c000-0xd000c0ff]
pci 0000:02:06.4: supports D1 D2
pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.4: PME# disabled
pci 0000:02:0e.0: reg 10 32bit mmio: [0xd000e000-0xd000ffff]
pci 0000:02:0e.0: supports D1 D2
pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:0e.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xd0000000-0xd03fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C068._PRT]
ACPI: PCI Interrupt Link [C0D8] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0DB] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0EE] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0EF] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11)
ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled.
ACPI: Power Resource [C1C5] (on)
ACPI: Power Resource [C244] (off)
ACPI: Power Resource [C245] (off)
ACPI: Power Resource [C246] (off)
ACPI: Power Resource [C247] (off)
PCI: Using ACPI for IRQ routing
hpet clockevent registered
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x2f7fffff could not be reserved
system 00:08: ioport range 0x500-0x57f has been reserved
system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x1000-0x107f has been reserved
system 00:09: ioport range 0x1100-0x113f has been reserved
system 00:09: ioport range 0x1200-0x121f has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
system 00:09: iomem range 0xfec00000-0xfec000ff has been reserved
system 00:09: iomem range 0xfed20000-0xff41ffff could not be reserved
system 00:09: iomem range 0xfed90000-0xfed9afff has been reserved
system 00:0a: iomem range 0xd2800-0xd3fff has been reserved
system 00:0a: iomem range 0xfeda0000-0xfedbffff has been reserved
system 00:0a: iomem range 0xfec01000-0xfec01fff has been reserved
pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:06.0: IO window: 0x003000-0x0030ff
pci 0000:02:06.0: IO window: 0x003400-0x0034ff
pci 0000:02:06.0: PREFETCH window: 0x30000000-0x33ffffff
pci 0000:02:06.0: MEM window: 0x34000000-0x37ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x3000-0x3fff
pci 0000:00:1e.0: MEM window: 0xd0000000-0xd03fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x00000033ffffff
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [C0DA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:02:06.0: PCI INT A -> Link[C0DA] -> GSI 10 (level, low) -> IRQ 10
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 02 index 0 io port: [0x3000-0x3fff]
bus: 02 index 1 mmio: [0xd0000000-0xd03fffff]
bus: 02 index 2 mmio: [0x30000000-0x33ffffff]
bus: 02 index 3 io port: [0x00-0xffff]
bus: 02 index 4 mmio: [0x000000-0xffffffff]
bus: 03 index 0 io port: [0x3000-0x30ff]
bus: 03 index 1 io port: [0x3400-0x34ff]
bus: 03 index 2 mmio: [0x30000000-0x33ffffff]
bus: 03 index 3 mmio: [0x34000000-0x37ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 19240k freed
squashfs: version 3.4 (2008/08/26) Phillip Lougher
fuse init (API version 7.10)
msgmni has been set to 1497
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
pci 0000:00:02.0: Boot video device
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 915GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
vesafb: framebuffer at 0xc0000000, mapped to 0xf0200000, using 3072k, total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
ACPI: PCI Interrupt Link [C0F0] enabled at IRQ 10
serial 0000:00:1e.3: PCI INT B -> Link[C0F0] -> GSI 10 (level, low) -> IRQ 10
serial 0000:00:1e.3: PCI INT B disabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
PNP: PS/2 Controller [PNP0303:C1C2,PNP0f13:C1C3] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
Using IPI Shortcut mode
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 260k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [C0F1] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ehci_hcd 0000:00:1d.7: PCI INT A -> Link[C0F1] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0580000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0F1] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00002000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [C0D9] enabled at IRQ 10
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0D9] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 10, io base 0x00002020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0DA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00002040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [C0DB] enabled at IRQ 10
uhci_hcd 0000:00:1d.3: PCI INT D -> Link[C0DB] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 10, io base 0x00002060
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
usbcore: registered new interface driver libusual
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
usbcore: deregistering interface driver usb-storage
usbcore: deregistering interface driver libusual
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
input: PC Speaker as /class/input/input2
piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x03)
ACPI: PCI Interrupt Link [C0D8] enabled at IRQ 11
PIIX_IDE 0000:00:1f.1: PCI INT A -> Link[C0D8] -> GSI 11 (level, low) -> IRQ 11
piix 0000:00:1f.1: IDE port disabled
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2580-0x2587
Probing IDE interface ide0...
hda: FUJITSU MHT2060AH PL, ATA DISK drive
hdb: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
b44 0000:02:0e.0: PCI INT A -> Link[C0D8] -> GSI 11 (level, low) -> IRQ 11
ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:14:c2:e1:b6:fa
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1
NTFS driver 2.1.29 [Flags: R/O MODULE].
SGI XFS with security attributes, no debug enabled
JFS: nTxBlock = 5990, nTxLock = 47920
NET: Registered protocol family 33
kAFS: Red Hat AFS client v0.1 registering.
md: linear personality registered for level -1
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
md: raid10 personality registered for level 10
device-mapper: multipath: version 1.0.5 loaded
md: raid1 personality registered for level 1
md: raid0 personality registered for level 0
md: multipath personality registered for level -4
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 4558.000 MB/sec
xor: using function: pIII_sse (4558.000 MB/sec)
async_tx: api initialized (async)
raid6: int32x1 614 MB/s
raid6: int32x2 773 MB/s
raid6: int32x4 531 MB/s
raid6: int32x8 490 MB/s
raid6: mmxx1 1895 MB/s
raid6: mmxx2 2151 MB/s
raid6: sse1x1 1374 MB/s
raid6: sse1x2 2270 MB/s
raid6: sse2x1 2525 MB/s
raid6: sse2x2 2722 MB/s
raid6: using algorithm sse2x2 (2722 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: multipath round-robin: version 1.0.0 loaded
---------------------- END DMESG ---------------------
Outputs of 'lsmod'
------------------------- LSMOD --------------------
Module Size Used by
dm_mirror 14616 0
dm_bbr 11460 0
dm_zero 2072 0
dm_round_robin 3224 0
raid456 124776 0
async_xor 3736 1 raid456
async_memcpy 2184 1 raid456
async_tx 6864 3 raid456,async_xor,async_memcpy
xor 16800 2 raid456,async_xor
multipath 7320 0
dm_crypt 13596 0
dm_region_hash 9624 1 dm_mirror
dm_log 9496 2 dm_mirror,dm_region_hash
raid0 6808 0
raid1 20504 0
dm_multipath 17208 1 dm_round_robin
raid10 19864 0
dm_snapshot 18124 0
dm_mod 53232 7 dm_mirror,dm_bbr,dm_zero,dm_crypt,dm_log,dm_multipath,dm_snapshot
linear 4760 0
md_mod 78408 6 raid456,multipath,raid0,raid1,raid10,linear
kafs 100152 0
af_rxrpc 78448 3 kafs
msdos 8328 0
jfs 169168 0
udf 82180 0
crc_itu_t 1928 1 udf
xfs 487648 0
cifs 228884 0
coda 29140 0
ntfs 96960 0
reiserfs 207360 0
minix 28964 0
ncpfs 49196 0
smbfs 60988 0
isofs 32456 0
ide_gd_mod 16988 0
sd_mod 24236 0
scsi_mod 136932 1 sd_mod
b44 27804 0
ssb 31012 1 b44
mii 4872 1 b44
piix 6812 0
pcspkr 2568 0
sermouse 4616 0
input_polldev 3728 0
ff_memless 5008 0
newtonkbd 3080 0
sunkbd 5000 0
xtkbd 3208 0
edd 9448 0
usbhid 34216 0
sl811_hcd 11528 0
uhci_hcd 23836 0
ohci_hcd 24480 0
isp116x_hcd 15240 0
ehci_hcd 35616 0
usbcore 136428 7 usbhid,sl811_hcd,uhci_hcd,ohci_hcd,isp116x_hcd,ehci_hcd
---------------------- END LSMOD ---------------------
Outputs of 'lspci'
------------------------- lspci --------------------
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
02:06.4 Class 0805: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
---------------------- END lspci ---------------------
Outputs of 'lspci -n'
------------------------- lspci -n --------------------
00:00.0 Class 0600: 8086:2590 (rev 03)
00:02.0 Class 0300: 8086:2592 (rev 03)
00:02.1 Class 0380: 8086:2792 (rev 03)
00:1d.0 Class 0c03: 8086:2658 (rev 03)
00:1d.1 Class 0c03: 8086:2659 (rev 03)
00:1d.2 Class 0c03: 8086:265a (rev 03)
00:1d.3 Class 0c03: 8086:265b (rev 03)
00:1d.7 Class 0c03: 8086:265c (rev 03)
00:1e.0 Class 0604: 8086:2448 (rev d3)
00:1e.2 Class 0401: 8086:266e (rev 03)
00:1e.3 Class 0703: 8086:266d (rev 03)
00:1f.0 Class 0601: 8086:2641 (rev 03)
00:1f.1 Class 0101: 8086:266f (rev 03)
02:04.0 Class 0280: 8086:4220 (rev 05)
02:06.0 Class 0607: 104c:8031
02:06.2 Class 0c00: 104c:8032
02:06.3 Class 0180: 104c:8033
02:06.4 Class 0805: 104c:8034
02:0e.0 Class 0200: 14e4:170c (rev 02)
---------------------- END lspci -n ---------------------
Content of '/proc/partitions'
------------------------- /proc/partitions --------------------
major minor #blocks name
3 0 58605120 hda
3 1 58597559 hda1
---------------------- END /proc/partitions ---------------------
Content of '/proc/net/dev'
------------------------- /proc/net/dev --------------------
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 9192556 5712 0 0 0 0 0 0 9192556 5712 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
---------------------- END /proc/net/dev ---------------------
Content of '/proc/cmdline'
------------------------- /proc/cmdline --------------------
BOOT_IMAGE=/nx6/kernel ramdisk_size=328192 init=/bin/minit CONSOLE=/dev/tty1 vga=0x317 root=/dev/ram0 rw quiet irqpoll pci=nomsi EPE_LOAD_MODULE=broadcom initrd=./nx6/initrd.gz
---------------------- END /proc/cmdline ---------------------
ls -l /lib/modules/
------------------------- /lib/modules/ --------------------
total 1
drwxr-xr-x 3 root root 1024 Mar 16 14:23 2.6.28-gentoo-r1
---------------------- END /lib/modules/ ---------------------
uname -r
------------------------- uname -r --------------------
2.6.28-gentoo-r1
---------------------- END uname -r ---------------------
Content of '/tmp/pcitable'
------------------------- /tmp/pcitable --------------------
"0x00008086" "0x0000266f" "0xffffffff" "0xffffffff" "piix" "Empirum detected Mass Storage Controller"
"0x000014e4" "0x0000170c" "0xffffffff" "0xffffffff" "b44" "Empirum detected Network Interface Card"
---------------------- END /tmp/pcitable ---------------------