Personalbackup startet nicht automatisch
Personalbackup startet nicht automatisch
Hallo, ich komme einfach nicht weiter
die verteilten Backups wollen einfach nicht starten. Es werden die Sicherungsordner angelegt - aber die bleiben leer, ausser derLogdatei ( aber die ist auch leer)
Manuell gestartet klappt es dann, wenn es jedoch über den Schedule laufen soll- Fehlanzeige.
Einstellungen
SaveProfils 0
start von Pbackup mit /B /F /C
event : screensaver, 7-17.00 UHr
schedule : daily
Merkwürdigerweise taucht im Autostart ein Link auf, der nachdem gestartet wurde sich in den Desktop in den Arbeitsplatz verwandelt - seltsam, seltsam. Vorher steht dort ganz normal der pbackup link.
Irgendwie steigen bei mir langsam kleine graue Rauchwolken auf - es will und will nicht klappen.
gruß
daffodil
die verteilten Backups wollen einfach nicht starten. Es werden die Sicherungsordner angelegt - aber die bleiben leer, ausser derLogdatei ( aber die ist auch leer)
Manuell gestartet klappt es dann, wenn es jedoch über den Schedule laufen soll- Fehlanzeige.
Einstellungen
SaveProfils 0
start von Pbackup mit /B /F /C
event : screensaver, 7-17.00 UHr
schedule : daily
Merkwürdigerweise taucht im Autostart ein Link auf, der nachdem gestartet wurde sich in den Desktop in den Arbeitsplatz verwandelt - seltsam, seltsam. Vorher steht dort ganz normal der pbackup link.
Irgendwie steigen bei mir langsam kleine graue Rauchwolken auf - es will und will nicht klappen.
gruß
daffodil
-
- Moderator
- Posts: 7962
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Wird denn der Link in der Autostart-Gruppe korrekt angelegt, d.h. tauchen die Optionen korrekt auf?
Am besten mal manuell das /B nach Installation manuell entfernen, anklicken -> Wird es korrekt geladen?
Haben Sie die Parameter wie folgt eingefügt?
[Shell:Product]
%Startup%\Empirum Personal Backup, "%App%\PBackup.exe" , \\%%EmpirumServer%%\Configurator$\User\PBackup.pbu /F /Q , %App%
Am besten mal manuell das /B nach Installation manuell entfernen, anklicken -> Wird es korrekt geladen?
Haben Sie die Parameter wie folgt eingefügt?
[Shell:Product]
%Startup%\Empirum Personal Backup, "%App%\PBackup.exe" , \\%%EmpirumServer%%\Configurator$\User\PBackup.pbu /F /Q , %App%
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7962
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Habe den o.a. Link mal getestet - das Phänomen mit dem Desktop tritt bei mir nicht auf. Allerdings stehen die Parameter /B /F /C auch nicht korrekt im Link drin.
Die Syntax weicht auch sehr stark von der von mir vorgeschlagenen (s.o.) ab.
Vielleicht versuchen Sie einfach mal meine Variante?
Die Syntax weicht auch sehr stark von der von mir vorgeschlagenen (s.o.) ab.
Vielleicht versuchen Sie einfach mal meine Variante?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7962
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Ich benutze dafür immer die Parameter /F /Q.
Wenn das klappt können Sie das /B noch hinzufügen damit alles versteckt wird.
Wenn das klappt können Sie das /B noch hinzufügen damit alles versteckt wird.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7962
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Am besten erst mal mit einer Batchdatei sicherstellen dass die Pbackup-Parameter wie gewünscht funktionieren.
Dann das ganze in den Startup-Link integrieren.
Dann das ganze in den Startup-Link integrieren.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Who is online
Users browsing this forum: No registered users and 5 guests