Dateisuche *.pst

Post Reply
ThomasLating
Posts: 12
Joined: 17. Oct 2014, 09:40
Contact:

Dateisuche *.pst

Post by ThomasLating » 27. Jun 2016, 16:05

Hallo,

ich versuche eine Dateisuche für lokale pst Archiv Dateien zu erstellen.
Diese sind leider nicht immer in den gleichen Ordnern gespeichert und Heißen dazu auch noch Unterschiedlich.

Habe versucht mit *.pst zu suchen, da findet der Scan leider nichts mehr.

Auf welcher Weise kann ich die Suche realisieren? Kann mir da jemand evtl. weiter helfen?

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: Dateisuche *.pst

Post by Hendrik_Ambrosius » 28. Jun 2016, 09:40

Versuchen Sie mal "Dateisuche puffern" zu deaktivieren in der Inventory Konfiguration.
Wenn man dann in der Dateisuche z.B. *.EXE einträgt sollten alle entsprechenden Files erscheinen im Scanergebnis.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

ThomasLating
Posts: 12
Joined: 17. Oct 2014, 09:40
Contact:

Re: Dateisuche *.pst

Post by ThomasLating » 29. Jun 2016, 09:40

Hendrik_Ambrosius wrote:Versuchen Sie mal "Dateisuche puffern" zu deaktivieren in der Inventory Konfiguration.
Wenn man dann in der Dateisuche z.B. *.EXE einträgt sollten alle entsprechenden Files erscheinen im Scanergebnis.

Das klappt leider nicht. Das war auch mein erster Gedanke. Das einzige Feld was noch frei ist, ist die Dateigröße.
Wenn ich das richtig gelesen habe muss ja bei jedem Feld was eingetragen sein oder?

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: Dateisuche *.pst

Post by Hendrik_Ambrosius » 29. Jun 2016, 10:23

Nein, auf keinen Fall etwas eintragen in alle Felder!
Einfach bei Dateisuche im Feld Dateiname z.B. *.PST eintragen.
Nicht mehr.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

ThomasLating
Posts: 12
Joined: 17. Oct 2014, 09:40
Contact:

Re: Dateisuche *.pst

Post by ThomasLating » 29. Jun 2016, 15:35

Kann es sein das die Verknüpfung falsche Parameter hat? Es will einfach nicht funktionieren....

C:\Windows\System32\Empirum\EmpInventory.exe "/CEmpInvScan_Windows.xml" "/O%Domainname%.%ComputerName%_%SysTime%.xml" /E /V2 /M /T /ZIP /DIFF

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: Dateisuche *.pst

Post by Hendrik_Ambrosius » 29. Jun 2016, 20:35

Nein, ist gut so.
Sie können ja auch die \\server\configurator$\user\invscan_xml.bat mal direkt starten.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

ThomasLating
Posts: 12
Joined: 17. Oct 2014, 09:40
Contact:

Re: Dateisuche *.pst

Post by ThomasLating » 30. Jun 2016, 13:42

Wenn ich die Batch starte klappt es auch nicht....

Wenn ich das Inventory mache kommen auch nicht wirklich zugriffe auf die Festplatte.....
Woran kann das noch liegen?

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: Dateisuche *.pst

Post by Hendrik_Ambrosius » 30. Jun 2016, 15:24

Posten Sie doch mal die empinvscan_windows.xml.
Dann kann ich mir das ansehen.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

ThomasLating
Posts: 12
Joined: 17. Oct 2014, 09:40
Contact:

Re: Dateisuche *.pst

Post by ThomasLating » 30. Jun 2016, 15:38

Hatte nur zip nicht probiert :)


<?xml version="1.0" encoding="ISO-8859-1" ?>
- <EmpInventory Version="16.1.0.4332">
- <document>
<name>EmpInvScan_WINDOWS</name>
<description />
<ostype>1</ostype>
</document>
- <global>
<FileScanBuffering>0</FileScanBuffering>
<DellInfo>0</DellInfo>
- <FileScanDrives>
<drive>%SYSTEMDRIVE%</drive>
</FileScanDrives>
<OSLanguage>1</OSLanguage>
<ScanNetworkDrives>0</ScanNetworkDrives>
<AltOutputFile use="false">\\<Server>\<Path>\%DomainName%.%ComputerName%.xml</AltOutputFile>
<ErrorLogfile use="false">\\<Server>\<Path>\%ComputerName%.log</ErrorLogfile>
<MaxFileStoreSize>1024</MaxFileStoreSize>
<AUT_AnonymousUser>0</AUT_AnonymousUser>
<AUT_AnonymousUserTime>0</AUT_AnonymousUserTime>
<AUT_OS_Details>1</AUT_OS_Details>
<AUT_Files />
</global>
- <ScanScopes>
<Scope RemoveExisting="1" Scan="1">InvSoftware</Scope>
<Scope RemoveExisting="1" Scan="1">InvLicenseKey</Scope>
<Scope RemoveExisting="1" Scan="0">InvERImages</Scope>
<Scope RemoveExisting="1" Scan="1">InvFixedDisk</Scope>
<Scope RemoveExisting="1" Scan="0">InvPrinters</Scope>
<Scope RemoveExisting="1" Scan="1">InvNetworkCards</Scope>
<Scope RemoveExisting="1" Scan="1">InvNetworkCon</Scope>
<Scope RemoveExisting="1" Scan="0">InvServices</Scope>
<Scope RemoveExisting="1" Scan="1">InvFiles</Scope>
<Scope RemoveExisting="1" Scan="1">InvUserDef</Scope>
<Scope RemoveExisting="1" Scan="1">Custom</Scope>
<Scope RemoveExisting="1" Scan="1">InvPatchesInstalled</Scope>
<Scope RemoveExisting="1" Scan="1">InvFileStore</Scope>
<Scope RemoveExisting="1" Scan="1">InvUserProfiles</Scope>
<Scope RemoveExisting="1" Scan="1">InvAUTFiles</Scope>
<Scope RemoveExisting="1" Scan="1">DMI</Scope>
<Scope RemoveExisting="1" Scan="1">WMI</Scope>
</ScanScopes>
<InventoryID />
<filestore />
- <filters>
- <software>
- <scan>
<empirum>1</empirum>
<msi>1</msi>
<other>1</other>
<file>1</file>
<reg>1</reg>
<virtualapp>1</virtualapp>
</scan>
<patterns />
</software>
- <files>
- <exclude>
<directory>%System%\DllCache</directory>
<directory>%SystemDrive%\Recycler</directory>
<directory>%InternetCache%</directory>
<directory>%Desktop%\%HKCR,Briefcase%</directory>
<directory>%TEMP%</directory>
<directory>%TMP%</directory>
<file>~*.*</file>
<file>*.swp</file>
<file>*.tmp</file>
</exclude>
- <file>
<filename>Moorhuhn.exe</filename>
<developer>Johnny Walker</developer>
<application>Moorhuhn</application>
<version>1.0</version>
<size>123456</size>
<checksumtype>SHA</checksumtype>
<virtualapp />
</file>
- <file>
<filename>*.PST</filename>
<developer />
<application />
<version />
<size />
<checksumtype />
<virtualapp />
</file>
- <file>
<filename>*.pst</filename>
<developer />
<application />
<version />
<size />
<checksumtype />
<virtualapp />
</file>
</files>
<registry />
- <excludenetworkcards>
<description>*Microsoft*</description>
<description>*Microsoft Loopbackadapter*</description>
<description>*Loopback*</description>
<description>*Nortel IPSECSHM*</description>
<description>Windows Mobile-based Device*</description>
</excludenetworkcards>
- <excludedmi>
<biosname>TECRA8100*</biosname>
<biosname>TOSHIB - 970814</biosname>
<biosname>IBM - 1032</biosname>
<biosname>IBM - 1290</biosname>
</excludedmi>
- <excludewmi>
<class>Win32_UserAccount</class>
</excludewmi>
<wmi_custom />
- <userdefinedvalues>
<item name="OSDeployedByEmpirum" type="">%HKLM,"SOFTWARE\Matrix42\Empirum Installer","EmpInst"%</item>
<item name="DirectX" type="">%HKLM,"SOFTWARE\Microsoft\Directx","Version"%</item>
<item name="EmpirumServer" type="">%EmpirumServer%</item>
<item name="LogonServer" type="">%LogonServer%</item>
<item name="Path" type="">%Path%</item>
<item name="TEMP" type="">%TEMP%</item>
<item name="TMP" type="">%TMP%</item>
<item name="OS" type="">%OS%</item>
<item name="TeamViewer ID 32bit" type="">%HKLM,"SOFTWARE\TeamViewer","ClientID"%</item>
<item name="TeamViewer ID 64bit" type="">%HKLM,"SOFTWARE\Wow6432Node\TeamViewer","ClientID"%</item>
</userdefinedvalues>
<includeaut />
<excludeaut />
- <userprofiles type="DISABLED">
<links>0</links>
<favorites>0</favorites>
<history>0</history>
<autostart>0</autostart>
</userprofiles>
</filters>
</EmpInventory>
Attachments
EmpInvScan_WINDOWS.zip
(1.54 KiB) Downloaded 280 times
Last edited by ThomasLating on 30. Jun 2016, 16:38, edited 1 time in total.

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: Dateisuche *.pst

Post by Hendrik_Ambrosius » 30. Jun 2016, 16:33

So kann ich leider damit nichts anfangen weil die ganze Formatierung kaputt geht.
Besser wäre zipen und hochladen gewesen.

Aber versuchen Sie doch nochmal vorher im Dateiscan c:\*.pst statt *.pst
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

ThomasLating
Posts: 12
Joined: 17. Oct 2014, 09:40
Contact:

Re: Dateisuche *.pst

Post by ThomasLating » 30. Jun 2016, 16:39

Hendrik_Ambrosius wrote:So kann ich leider damit nichts anfangen weil die ganze Formatierung kaputt geht.
Besser wäre zipen und hochladen gewesen.

Aber versuchen Sie doch nochmal vorher im Dateiscan c:\*.pst statt *.pst


Das scheint es gewesen zu sein :) Ich warte mal ein paar weitere Clients ab.
Muss ich jetzt ein Reinstall des Inventory machen?

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: Dateisuche *.pst

Post by Hendrik_Ambrosius » 30. Jun 2016, 19:38

Puuuuh... hatte das mit dem Laufwerksbuchstaben übersehen.
Nein, eine Reinstallation von Inventory ist nicht notwendig.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

ThomasLating
Posts: 12
Joined: 17. Oct 2014, 09:40
Contact:

Re: Dateisuche *.pst

Post by ThomasLating » 01. Jul 2016, 08:02

Hendrik_Ambrosius wrote:Puuuuh... hatte das mit dem Laufwerksbuchstaben übersehen.
Nein, eine Reinstallation von Inventory ist nicht notwendig.

Vielen Dank!

Post Reply

Return to “Inventory”

Who is online

Users browsing this forum: No registered users and 6 guests