Overlapped I/O Operation Is in Progress
Overlapped I/O Operation Is in Progress
Hallo,
bei der Installation der Dienste über DBUtil bricht die Installation mit der Fehlermeldung "error in SetupInstaller: Execution of setup failed". Im Eventlog hab ich dann den Eintrag "The Empirum-Agent service terminated with the following error: Overlapped I/O operation is in progress".
Ich versuche gerade eine vorhandene Installation von 14.2.1.191 von einem Win2003 32bit auf Win2012 64bit zu "verschieben". Bei der Installation auf dem Win2012 Server kommt dann allerdings der o.a. Fehler.
Jemand ne Idee?
bei der Installation der Dienste über DBUtil bricht die Installation mit der Fehlermeldung "error in SetupInstaller: Execution of setup failed". Im Eventlog hab ich dann den Eintrag "The Empirum-Agent service terminated with the following error: Overlapped I/O operation is in progress".
Ich versuche gerade eine vorhandene Installation von 14.2.1.191 von einem Win2003 32bit auf Win2012 64bit zu "verschieben". Bei der Installation auf dem Win2012 Server kommt dann allerdings der o.a. Fehler.
Jemand ne Idee?
Thomas Günter
Sys-Admin
Empirum v21.0.0, UEM 2103
Sys-Admin
Empirum v21.0.0, UEM 2103
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Overlapped I/O Operation Is in Progress
Gucken Sie mal ob noch irgendwelche setup.exe Prozesse parallel laufen, ggf. beenden.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Overlapped I/O Operation Is in Progress
Hallo,
leider ist das nicht der Fall. Kein gleichzeitig laufender Setup Prozess
leider ist das nicht der Fall. Kein gleichzeitig laufender Setup Prozess
Thomas Günter
Sys-Admin
Empirum v21.0.0, UEM 2103
Sys-Admin
Empirum v21.0.0, UEM 2103
Re: Overlapped I/O Operation Is in Progress
Könnte das hier was damit zu tun haben? Klick mich
Thomas Günter
Sys-Admin
Empirum v21.0.0, UEM 2103
Sys-Admin
Empirum v21.0.0, UEM 2103
Re: Overlapped I/O Operation Is in Progress
SQL Server und Empirum noch mal nei installiert, wieder kein Erfolg.
Win 2012 R2 Standard
SQL 2008
Empirum 14.2.
Ich weiss so jetzt nicht weiter, jemand nen Tipp?
Win 2012 R2 Standard
SQL 2008
Empirum 14.2.
Ich weiss so jetzt nicht weiter, jemand nen Tipp?
Thomas Günter
Sys-Admin
Empirum v21.0.0, UEM 2103
Sys-Admin
Empirum v21.0.0, UEM 2103
Re: Overlapped I/O Operation Is in Progress
Auch bei einer frischen Installation der V15.1 bekomme ich diesen Fehler.
Kann da jemand helfen?
Kann da jemand helfen?
Thomas Günter
Sys-Admin
Empirum v21.0.0, UEM 2103
Sys-Admin
Empirum v21.0.0, UEM 2103
Re: Overlapped I/O Operation Is in Progress
Hi,
bitte prüfen ob .NET 3,5 Features installiert sind. Das benötigt eine SDK von Citrix die bei der Installation vom ActivationServices installiert wird.
cYa
bitte prüfen ob .NET 3,5 Features installiert sind. Das benötigt eine SDK von Citrix die bei der Installation vom ActivationServices installiert wird.
cYa
Thomas Hahn
Technical Account Manager
Matrix42 AG
Email: thomas.hahn[at]matrix42.com
http://www.matrix42.de
Skype: thahn42
ICQ: IO25IGO8
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.
Technical Account Manager
Matrix42 AG
Email: thomas.hahn[at]matrix42.com
http://www.matrix42.de
Skype: thahn42
ICQ: IO25IGO8
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.
Re: Overlapped I/O Operation Is in Progress
alle .NET Framework 3.5 Features sind installiert.
Thomas Günter
Sys-Admin
Empirum v21.0.0, UEM 2103
Sys-Admin
Empirum v21.0.0, UEM 2103
Re: Overlapped I/O Operation Is in Progress
hi again,
dann vielleicht mal das debugview mitlaufen lassen, wenn man den Dienst installiert
Steht was im EventLog ?
cYa
dann vielleicht mal das debugview mitlaufen lassen, wenn man den Dienst installiert
Steht was im EventLog ?
cYa
Thomas Hahn
Technical Account Manager
Matrix42 AG
Email: thomas.hahn[at]matrix42.com
http://www.matrix42.de
Skype: thahn42
ICQ: IO25IGO8
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.
Technical Account Manager
Matrix42 AG
Email: thomas.hahn[at]matrix42.com
http://www.matrix42.de
Skype: thahn42
ICQ: IO25IGO8
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.
Re: Overlapped I/O Operation Is in Progress
Im Anhang der Output von Debugview, im Eventlog steht nur das, was im ersten Beitrag schon steht.
"The Empirum-Agent service terminated with the following error: Overlapped I/O operation is in progress"
- Attachments
-
- Debugview-ouput.zip
- (2.44 KiB) Downloaded 392 times
Thomas Günter
Sys-Admin
Empirum v21.0.0, UEM 2103
Sys-Admin
Empirum v21.0.0, UEM 2103
-
- Posts: 521
- Joined: 06. Apr 2006, 22:01
- Location: Bochum
- Contact:
Re: Overlapped I/O Operation Is in Progress
Moin!
Im Log steht :
...
[4140] Installation of DotNetFX: Remove file WindowsServer2003-KB968930-x86-ENU.exe
[4140] error in SetupInstaller: Execution of setup failed!
...
Installiere mal die WindowsServer2003-KB968930-x86-ENU.exe händisch und schau mal welche Meldung kommt?
\Empirum\Empirum DBUtil\Windows\DotNetfx\WindowsServer2003-KB968930-x86-ENU.exe
Im Log steht :
...
[4140] Installation of DotNetFX: Remove file WindowsServer2003-KB968930-x86-ENU.exe
[4140] error in SetupInstaller: Execution of setup failed!
...
Installiere mal die WindowsServer2003-KB968930-x86-ENU.exe händisch und schau mal welche Meldung kommt?
\Empirum\Empirum DBUtil\Windows\DotNetfx\WindowsServer2003-KB968930-x86-ENU.exe
Frank Dethlefsen
Consultant und Coach
UPDATENOW GmbH
Frank.Dethlefsen@updatenow.de
https://empirum.blogspot.de/
Consultant und Coach
UPDATENOW GmbH
Frank.Dethlefsen@updatenow.de
https://empirum.blogspot.de/
Re: Overlapped I/O Operation Is in Progress
Hallo,
es kommt die Fehlermeldung "Not enough storage is available to process this command".
Was mich wundert ist, dass ein "WindowsServer2003 KB...x86" aufgerufen werden soll bei einem Windows 2012 64bit System..
es kommt die Fehlermeldung "Not enough storage is available to process this command".
Was mich wundert ist, dass ein "WindowsServer2003 KB...x86" aufgerufen werden soll bei einem Windows 2012 64bit System..
Thomas Günter
Sys-Admin
Empirum v21.0.0, UEM 2103
Sys-Admin
Empirum v21.0.0, UEM 2103
Re: Overlapped I/O Operation Is in Progress
Gibt es hier eine Lösung ?
Ich hab das gleiche Problem. Alle Dienste lassen sich Installieren, nur der Activation Dienst nicht.
Version 15.0.0.466 auf Win2008 R2 .
Besten Dank
Ich hab das gleiche Problem. Alle Dienste lassen sich Installieren, nur der Activation Dienst nicht.
Version 15.0.0.466 auf Win2008 R2 .
Besten Dank
Re: Overlapped I/O Operation Is in Progress
Hallo,
bei mir lag der Fehler darin, dass ich unter einem anderen User an Windows angemeldet war als der User, mit dem ich die Software installiert hatte. Somit war der User, unter dessen Kontext dbutil gestartet wurde ein anderer als der Kontext, unter dem die Dienste aktiviert werden sollten. das hat sich bei mir gebissen.
bei mir lag der Fehler darin, dass ich unter einem anderen User an Windows angemeldet war als der User, mit dem ich die Software installiert hatte. Somit war der User, unter dessen Kontext dbutil gestartet wurde ein anderer als der Kontext, unter dem die Dienste aktiviert werden sollten. das hat sich bei mir gebissen.
Thomas Günter
Sys-Admin
Empirum v21.0.0, UEM 2103
Sys-Admin
Empirum v21.0.0, UEM 2103
Re: Overlapped I/O Operation Is in Progress
Hallo,
wie bekomme ich heraus unter welchen user die SW installiert wurde ?
Eigentlich existieren aber nur 2 User , die hab ich durchprobiert. es ändert sich nichts.
Ich hab an anderer Stelle gelesen, daß
a. ) Das Problem in verschiedenen Programmversionen von Matrix auftritt
b. ) Deinstallation und neuinst nichts bringen
c. ) erst manuelle Bereinigung der Reg. und des Filesystems von allen MAtrix Spuren - VOR einer Neuinst das Problem behebt
Aus a + b schließe ich mal, daß ei Update nichts bringen wird.
Mir fehlt jetzt das Wissen, zu erkennen, was ich in der Registry oder dem FS bereinigen sollte um nicht alles Neu machen zu müssen.
Hat da jemand eine Idee?
wie bekomme ich heraus unter welchen user die SW installiert wurde ?
Eigentlich existieren aber nur 2 User , die hab ich durchprobiert. es ändert sich nichts.
Ich hab an anderer Stelle gelesen, daß
a. ) Das Problem in verschiedenen Programmversionen von Matrix auftritt
b. ) Deinstallation und neuinst nichts bringen
c. ) erst manuelle Bereinigung der Reg. und des Filesystems von allen MAtrix Spuren - VOR einer Neuinst das Problem behebt
Aus a + b schließe ich mal, daß ei Update nichts bringen wird.
Mir fehlt jetzt das Wissen, zu erkennen, was ich in der Registry oder dem FS bereinigen sollte um nicht alles Neu machen zu müssen.
Hat da jemand eine Idee?
Who is online
Users browsing this forum: No registered users and 7 guests