Fehler ESubdepot_PXEImages
Fehler ESubdepot_PXEImages
Hallo,
der Subdepotjob ESubdepot_PXEImages läuft permanent auf Fehler mit folgendem Fehlerlog:
ESubdepot_PXEImages: 14/11/2005 02:03:26 Error: External command was not successful. ERROR
ESubdepot_PXEImages: 14/11/2005 02:03:26 pxeimgchange.exe bootdisk.img /a ERROR
ESubdepot_PXEImages: 14/11/2005 02:03:25 pxeimgchange.exe bootdisk.img /a STARTED
ESubdepot_PXEImages: 14/11/2005 02:03:25 Synchronising. MESSAGE
ESubdepot_PXEImages: 14/11/2005 02:03:25 Reading destination. MESSAGE
ESubdepot_PXEImages: 14/11/2005 02:03:25 \\172.30.3.10\empirum$ Logon OK
ESubdepot_PXEImages: 14/11/2005 02:03:25 Connecting destination. MESSAGE
ESubdepot_PXEImages: 14/11/2005 02:03:24 Reading source. MESSAGE
ESubdepot_PXEImages: 14/11/2005 02:03:24 \\192.168.10.1\empirum$ Logon OK
ESubdepot_PXEImages: 14/11/2005 02:03:23 Connecting source. MESSAGE
ESubdepot_PXEImages: 14/11/2005 02:03:23 Task started. MESSAGE
Wir betreiben mehrere Subdepotserver und nur bei diesem tritt das Problem auf.
Wo kann ich nach dem Fehler suchen?
Vielen Dank.
MfG
F. Fiebiger
der Subdepotjob ESubdepot_PXEImages läuft permanent auf Fehler mit folgendem Fehlerlog:
ESubdepot_PXEImages: 14/11/2005 02:03:26 Error: External command was not successful. ERROR
ESubdepot_PXEImages: 14/11/2005 02:03:26 pxeimgchange.exe bootdisk.img /a ERROR
ESubdepot_PXEImages: 14/11/2005 02:03:25 pxeimgchange.exe bootdisk.img /a STARTED
ESubdepot_PXEImages: 14/11/2005 02:03:25 Synchronising. MESSAGE
ESubdepot_PXEImages: 14/11/2005 02:03:25 Reading destination. MESSAGE
ESubdepot_PXEImages: 14/11/2005 02:03:25 \\172.30.3.10\empirum$ Logon OK
ESubdepot_PXEImages: 14/11/2005 02:03:25 Connecting destination. MESSAGE
ESubdepot_PXEImages: 14/11/2005 02:03:24 Reading source. MESSAGE
ESubdepot_PXEImages: 14/11/2005 02:03:24 \\192.168.10.1\empirum$ Logon OK
ESubdepot_PXEImages: 14/11/2005 02:03:23 Connecting source. MESSAGE
ESubdepot_PXEImages: 14/11/2005 02:03:23 Task started. MESSAGE
Wir betreiben mehrere Subdepotserver und nur bei diesem tritt das Problem auf.
Wo kann ich nach dem Fehler suchen?
Vielen Dank.
MfG
F. Fiebiger
Der Sync selbst funktioniert, es schlägt die Bearbeitung des PXE-Images mit der pxeimgchange.exe fehl. Bitte mal prüfen ob diese überhaupt vorhanden ist und wenn ja ob denn das Image bei Ihnen auch bootdisk.img heisst. Ansonsten den Syncjob entsprechend anpassen.ESubdepot_PXEImages: 14/11/2005 02:03:26 Error: External command was not successful. ERROR
ESubdepot_PXEImages: 14/11/2005 02:03:26 pxeimgchange.exe bootdisk.img /a ERROR
ESubdepot_PXEImages: 14/11/2005 02:03:25 pxeimgchange.exe bootdisk.img /a STARTED
Jens Beimel
Principal Consultant
Matrix42 AG
info@matrix42.de
http://www.matrix42.de
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG.
Principal Consultant
Matrix42 AG
info@matrix42.de
http://www.matrix42.de
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG.
Was passiert denn wenn mal manuell der Befehl pxeimgchange.exe bootdisk.img /a ausgeführt wird?
Jetzt geht es um ganz simple Sachen wie lokale Pfade etc. denn der Change selbst erfolgt ja lokal auf dem Depotserver.
Jetzt geht es um ganz simple Sachen wie lokale Pfade etc. denn der Change selbst erfolgt ja lokal auf dem Depotserver.
Jens Beimel
Principal Consultant
Matrix42 AG
info@matrix42.de
http://www.matrix42.de
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG.
Principal Consultant
Matrix42 AG
info@matrix42.de
http://www.matrix42.de
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG.
Wenn ich in einem DOS-Fenster in das Verzeichnis des images wechsle und das Kommando aufrufe, kommt es zu keiner Fehlermeldung.
Die Pfadsituation sieht wie folgt aus:
empsync.exe: c:\windows\system32
bootdisk.img: empirum$\empinst\wizard\image\pxeimages
pxeimgchang.exe: c:\windows\system32
MfG
F. Fiebiger
Die Pfadsituation sieht wie folgt aus:
empsync.exe: c:\windows\system32
bootdisk.img: empirum$\empinst\wizard\image\pxeimages
pxeimgchang.exe: c:\windows\system32
MfG
F. Fiebiger
Definiert ist das ganze Postcommand in der entsprechenden SYC Datei. Dort bitte mal den Befehl mit kompletten Pfaden eintragen und dann testen.
Jens Beimel
Principal Consultant
Matrix42 AG
info@matrix42.de
http://www.matrix42.de
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG.
Principal Consultant
Matrix42 AG
info@matrix42.de
http://www.matrix42.de
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG.
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Noch ne Idee: Das PXEIMGCHANGE über eine Batch-Datei aufrufen.
Also ....\pxe-chg.bat in das SYC-File.
Vielleicht hilft es...
Also ....\pxe-chg.bat in das SYC-File.
Vielleicht hilft es...
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 256
- Joined: 21. Jan 2005, 10:29
- Location: Aschaffenburg
- Contact:
Hallo,
es sieht fast do aus, als ob der Job seine Informationen über das Kommando von einer anderen empsync.sync-Datei bezieht. Ich habe jetzt mal zum Test den Parameter d0 leer gelassen bzw. das Kommando bewusst mit falscher Syntax eingetragen. Hier mal die komplette sync-Datei:
[Main]
Version=10.0.0
IsDDCSource=0
MoreDDCFiles=0
Recursive=1
DontDeleteFiles=0
MoveFiles=0
NoTargetScan=0
TimeTolerance2sec=0
FileSizeCompare=0
HasFileSizeLimit=0
writeouttolog=0
executeForEachTarget=0
BandwidthThrotteling=100
MinimumBandwidth=0
LogFile=C:\Program Files\EMPIRUM\EMPSYNC\ESubdepot_PXEImages\EmpSync.log
[Paths]
Source_prefix=
Source_suffix=\Empinst\Wizard\Image\PXEImages
Source_variable=SYNC_SERVER1
Target_prefix=
Target_suffix=\Empinst\Wizard\Image\PXEImages
Target_variable=SYNC_SERVER2
[Schedule]
BeginTime=00:00
EndTime=23:59
CheckInterval=1440
BeginDate=8/31/2004 0:00
EndScheduleType=0
EndDate=8/31/2004 23:59
RestSchedules=1
TimeLimit=0
IntervalType=0
DailyType=0
Days=1
runOnce=0
RunOnceTime=00:00
[ExitCommands]
[glow=red]d0=[/glow]
[Src]
Path=\\192.168.10.1\empirum$\empinst\wizard\image\pxeimages
Pw=D835B8FF5266F38524331D7C07C0F369134ECE9CE676F5896809B0E2976E3362592E748B8D133778DB13FD2ECA1F894F
User=matrix42
[Dst]
Path0=\\172.30.3.10\empirum$\empinst\wizard\image\pxeimages
Pw0=A7049024B8BE8665CF97DE766A6AC9C2597DCB46E4B4016FE0643818E7FC81633B72D99E714D512FD63D97CB7F116328
User0=us\matrix42
Trotzdem wirft der Sync-Monitor im Protokoll die ursprüngliche Syntax aus:
ESubdepot_PXEImages: 18/11/2005 05:09:06 Error: External command was not successful. ERROR
[glow=red]ESubdepot_PXEImages: 18/11/2005 05:09:06 pxeimgchange.exe bootdisk.img /a ERROR
ESubdepot_PXEImages: 18/11/2005 05:09:05 pxeimgchange.exe bootdisk.img /a STARTED [/glow]
ESubdepot_PXEImages: 18/11/2005 05:09:05 Synchronising. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:05 Reading destination. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:05 \\172.30.3.10\empirum$ Logon OK
ESubdepot_PXEImages: 18/11/2005 05:09:05 Connecting destination. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:05 Reading source. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:04 \\192.168.10.1\empirum$ Logon OK
ESubdepot_PXEImages: 18/11/2005 05:09:04 Connecting source. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:04 Task started. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:04 Processing
ESubdepot_PXEImages: 18/11/2005 05:09:04 Starting manually.
MfG
F. Fiebiger
es sieht fast do aus, als ob der Job seine Informationen über das Kommando von einer anderen empsync.sync-Datei bezieht. Ich habe jetzt mal zum Test den Parameter d0 leer gelassen bzw. das Kommando bewusst mit falscher Syntax eingetragen. Hier mal die komplette sync-Datei:
[Main]
Version=10.0.0
IsDDCSource=0
MoreDDCFiles=0
Recursive=1
DontDeleteFiles=0
MoveFiles=0
NoTargetScan=0
TimeTolerance2sec=0
FileSizeCompare=0
HasFileSizeLimit=0
writeouttolog=0
executeForEachTarget=0
BandwidthThrotteling=100
MinimumBandwidth=0
LogFile=C:\Program Files\EMPIRUM\EMPSYNC\ESubdepot_PXEImages\EmpSync.log
[Paths]
Source_prefix=
Source_suffix=\Empinst\Wizard\Image\PXEImages
Source_variable=SYNC_SERVER1
Target_prefix=
Target_suffix=\Empinst\Wizard\Image\PXEImages
Target_variable=SYNC_SERVER2
[Schedule]
BeginTime=00:00
EndTime=23:59
CheckInterval=1440
BeginDate=8/31/2004 0:00
EndScheduleType=0
EndDate=8/31/2004 23:59
RestSchedules=1
TimeLimit=0
IntervalType=0
DailyType=0
Days=1
runOnce=0
RunOnceTime=00:00
[ExitCommands]
[glow=red]d0=[/glow]
[Src]
Path=\\192.168.10.1\empirum$\empinst\wizard\image\pxeimages
Pw=D835B8FF5266F38524331D7C07C0F369134ECE9CE676F5896809B0E2976E3362592E748B8D133778DB13FD2ECA1F894F
User=matrix42
[Dst]
Path0=\\172.30.3.10\empirum$\empinst\wizard\image\pxeimages
Pw0=A7049024B8BE8665CF97DE766A6AC9C2597DCB46E4B4016FE0643818E7FC81633B72D99E714D512FD63D97CB7F116328
User0=us\matrix42
Trotzdem wirft der Sync-Monitor im Protokoll die ursprüngliche Syntax aus:
ESubdepot_PXEImages: 18/11/2005 05:09:06 Error: External command was not successful. ERROR
[glow=red]ESubdepot_PXEImages: 18/11/2005 05:09:06 pxeimgchange.exe bootdisk.img /a ERROR
ESubdepot_PXEImages: 18/11/2005 05:09:05 pxeimgchange.exe bootdisk.img /a STARTED [/glow]
ESubdepot_PXEImages: 18/11/2005 05:09:05 Synchronising. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:05 Reading destination. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:05 \\172.30.3.10\empirum$ Logon OK
ESubdepot_PXEImages: 18/11/2005 05:09:05 Connecting destination. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:05 Reading source. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:04 \\192.168.10.1\empirum$ Logon OK
ESubdepot_PXEImages: 18/11/2005 05:09:04 Connecting source. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:04 Task started. MESSAGE
ESubdepot_PXEImages: 18/11/2005 05:09:04 Processing
ESubdepot_PXEImages: 18/11/2005 05:09:04 Starting manually.
MfG
F. Fiebiger
Mit freundlichen Grüssen
F. Fiebiger
F. Fiebiger
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Bei solchen Tests bitte den Sync-Dienst noch mal durchstarten, damit auch WIRKLICH die neue SYC-Datei gezogen wird.
Tritt es dann noch auf?
Tritt es dann noch auf?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Hallo,
das Auslagern in eine Batch-Datei bringt leider auch nichts:
ESubdepot_PXEImages: 18/11/2005 06:50:58 Error: External command was not successful. ERROR
ESubdepot_PXEImages: 18/11/2005 06:50:58 pxesync.bat ERROR
ESubdepot_PXEImages: 18/11/2005 06:50:57 pxesync.bat STARTED
ESubdepot_PXEImages: 18/11/2005 06:50:57 Synchronising. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:57 Reading destination. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:57 \\172.30.3.10\empirum$ Logon OK
ESubdepot_PXEImages: 18/11/2005 06:50:57 Connecting destination. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:57 Reading source. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:56 \\192.168.10.1\empirum$ Logon OK
ESubdepot_PXEImages: 18/11/2005 06:50:56 Connecting source. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:56 Task started. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:56 Processing
ESubdepot_PXEImages: 18/11/2005 06:50:56 Starting manually.
MfG
F. Fiebiger
das Auslagern in eine Batch-Datei bringt leider auch nichts:
ESubdepot_PXEImages: 18/11/2005 06:50:58 Error: External command was not successful. ERROR
ESubdepot_PXEImages: 18/11/2005 06:50:58 pxesync.bat ERROR
ESubdepot_PXEImages: 18/11/2005 06:50:57 pxesync.bat STARTED
ESubdepot_PXEImages: 18/11/2005 06:50:57 Synchronising. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:57 Reading destination. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:57 \\172.30.3.10\empirum$ Logon OK
ESubdepot_PXEImages: 18/11/2005 06:50:57 Connecting destination. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:57 Reading source. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:56 \\192.168.10.1\empirum$ Logon OK
ESubdepot_PXEImages: 18/11/2005 06:50:56 Connecting source. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:56 Task started. MESSAGE
ESubdepot_PXEImages: 18/11/2005 06:50:56 Processing
ESubdepot_PXEImages: 18/11/2005 06:50:56 Starting manually.
MfG
F. Fiebiger
Mit freundlichen Grüssen
F. Fiebiger
F. Fiebiger
Who is online
Users browsing this forum: No registered users and 6 guests