SyncTemplates ausbringen
-
- Posts: 15
- Joined: 24. Oct 2006, 15:17
- Contact:
SyncTemplates ausbringen
Hallo,
ich habe einen SubDepot Server nach der Anleitung "Empirum Sync Depot Setup" eingerichtet. Die Anleitung lies sich bis zur Installation vom SWDepot auch problemlos ausführen aber die verschied. SyncTemplates machen Probleme. Ich habe eine Konfigurationgruppe erstellt und die Templates hinzugefügt und aktiviert. Sie tauchen auch in der ddc für den DepotServer auf, werden aber nicht ausgebracht. Aus dem DebugViewer ist auch nicht viel zu sehen:
[1304] [McA](1308): CNTService::Handler(4)
[1304] [McA](1308): CNTService::OnInterrogate()
[1304] [McA](1308): Updating status (1344608, 4)
[2328] ServiceCtrlHandler: Start
[1680] MainWorkingThread looping
...
kann jemand helfen?
ich habe einen SubDepot Server nach der Anleitung "Empirum Sync Depot Setup" eingerichtet. Die Anleitung lies sich bis zur Installation vom SWDepot auch problemlos ausführen aber die verschied. SyncTemplates machen Probleme. Ich habe eine Konfigurationgruppe erstellt und die Templates hinzugefügt und aktiviert. Sie tauchen auch in der ddc für den DepotServer auf, werden aber nicht ausgebracht. Aus dem DebugViewer ist auch nicht viel zu sehen:
[1304] [McA](1308): CNTService::Handler(4)
[1304] [McA](1308): CNTService::OnInterrogate()
[1304] [McA](1308): Updating status (1344608, 4)
[2328] ServiceCtrlHandler: Start
[1680] MainWorkingThread looping
...
kann jemand helfen?
-
- Posts: 15
- Joined: 24. Oct 2006, 15:17
- Contact:
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Bitte mal die INI Datei (Computervariablen) des Depotservers posten.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 15
- Joined: 24. Oct 2006, 15:17
- Contact:
Hallo, die INI sieht so aus:
[US-RG-MAIL01]
PM_XPSP2_FIREWALL=0
PM_TEST=0
SUBDEPOT_TOKENCOUNT=50
READYTOINSTALL_TEST=0
SUBDEPOT_ROOTPATH=E:\empirum
HANDHELD_DISABLE_RAS=0
HANDHELD_HTTPSERVERPORT=80
EMPIRUM_RC_MASTER_GROUP1=Empirum RC Master
SYNC_SERVER1_count=1
SYNC_SERVER1_server1=\\GER-RG-BACK1\Empirum$
SYNC_SERVER1_user1=
SYNC_SERVER1_password1=
SYNC_SERVER1_context1=
SYNC_SERVER1_tree1=
SYNC_SERVER2_count=1
SYNC_SERVER2_server1=E:\Empirum
SYNC_SERVER2_user1=
SYNC_SERVER2_password1=
SYNC_SERVER2_context1=
SYNC_SERVER2_tree1=
SYNC_SERVER3_count=0
SYNC_SERVER4_count=0
[US-RG-MAIL01]
PM_XPSP2_FIREWALL=0
PM_TEST=0
SUBDEPOT_TOKENCOUNT=50
READYTOINSTALL_TEST=0
SUBDEPOT_ROOTPATH=E:\empirum
HANDHELD_DISABLE_RAS=0
HANDHELD_HTTPSERVERPORT=80
EMPIRUM_RC_MASTER_GROUP1=Empirum RC Master
SYNC_SERVER1_count=1
SYNC_SERVER1_server1=\\GER-RG-BACK1\Empirum$
SYNC_SERVER1_user1=
SYNC_SERVER1_password1=
SYNC_SERVER1_context1=
SYNC_SERVER1_tree1=
SYNC_SERVER2_count=1
SYNC_SERVER2_server1=E:\Empirum
SYNC_SERVER2_user1=
SYNC_SERVER2_password1=
SYNC_SERVER2_context1=
SYNC_SERVER2_tree1=
SYNC_SERVER3_count=0
SYNC_SERVER4_count=0
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Sieht OK aus, wenn die Server in der selben Domain sein.
Frage: Ist das Depot vielleicht ein Windows 2003 Server? Dann bitte mal direkt dort einloggen oder über "mstsc /console". Erscheint dann vielleicht eine Frage ob eine Datei ausgeführt werden darf?
Frage: Ist das Depot vielleicht ein Windows 2003 Server? Dann bitte mal direkt dort einloggen oder über "mstsc /console". Erscheint dann vielleicht eine Frage ob eine Datei ausgeführt werden darf?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 15
- Joined: 24. Oct 2006, 15:17
- Contact:
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Nö, nie gesehen.
Läuft auf dem Depotserver ein Prozess namens "setup" ?
Läuft auf dem Depotserver ein Prozess namens "setup" ?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 15
- Joined: 24. Oct 2006, 15:17
- Contact:
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Das ist OK. Dann hängt also kein Setup.
Am besten noch mal den Empirum Agenten neu installieren. Ideal wäre per RPC-Push (erst deinstallieren, dann installieren).
Dann eine andere Software (z.B. Textpad) zuweisen - wird die installiert?
Am besten noch mal den Empirum Agenten neu installieren. Ideal wäre per RPC-Push (erst deinstallieren, dann installieren).
Dann eine andere Software (z.B. Textpad) zuweisen - wird die installiert?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 15
- Joined: 24. Oct 2006, 15:17
- Contact:
... die Neu-Installation des Agenten und das Durchstarten der Datenbank haben es gebracht. Danach konnten alles Templates installiert werden. Ist das eigentlich ein bekanntes Problem, dass sich die Datenbank manchmal aufhängt? Leider kann man nur daran erkennen, das die Pakete nicht mehr ausgebracht werden.
Erstmal vielen Dank
Erstmal vielen Dank
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Mit der Datenbank haben wir zum Glück matrix-seitig nix zu tun
Habe ich auch noch nie gehabt, muss ich sagen.
Aber wieso wurden dann die INIs und DDCs erstellt wenn keine Datenbank mehr da war?!
Habe ich auch noch nie gehabt, muss ich sagen.
Aber wieso wurden dann die INIs und DDCs erstellt wenn keine Datenbank mehr da war?!
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
>war mit der Installation die Installation des Agenten auf den SubDepot Server gemeint?
Ja.
>Ist ein SubDepot-Server sein eigener Empirum-Server oder muss dieser auf den Master zeigen?
Geht beides, ich empfehle aber, die EmpirumServer-Variable auf den übergeordneten Server (in kleinen Netzen den Master) zu setzen.
Grund: Wenn irgendetwas mit dem Sync nicht klappt kann man es einfach mittels Reinstallation von Sync-Templates direkt vom Master lösen. Ansonsten sägt man sich den Rettungsast ab, weil alles steht. Nur noch manuelle Korrektur möglich.
Ja.
>Ist ein SubDepot-Server sein eigener Empirum-Server oder muss dieser auf den Master zeigen?
Geht beides, ich empfehle aber, die EmpirumServer-Variable auf den übergeordneten Server (in kleinen Netzen den Master) zu setzen.
Grund: Wenn irgendetwas mit dem Sync nicht klappt kann man es einfach mittels Reinstallation von Sync-Templates direkt vom Master lösen. Ansonsten sägt man sich den Rettungsast ab, weil alles steht. Nur noch manuelle Korrektur möglich.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Who is online
Users browsing this forum: No registered users and 2 guests