Hallo,
ich würde gerne das Standard Inventory Paket etwas erweitern.
Bisher führen wir das Inventory über das Login Skript aus.
Leider kann man damit immer nur ein "Standard" Inventory ausführen.
Ich hätte aber gerne einmal im Monat ein komplettes Inventory mit Filescan,
eine neue Vorlagen *.xml wo Filescan mit dabei ist habe ich mir schon erstellt.
Jetzt würde ich gerne in der Setup.inf mit einer IF Abfrage auf das Install-Datum prüfen und einmal im Monat einen Abschnitt "Inventory_Komplett" anspringen. Wie muß diese Abfrage aussehen?
Vielleicht gibt es aber auch noch eine elegantere Version.
Danke
Gruss Marc
Inventory variabel Paketieren
-
- Posts: 29
- Joined: 14. Dec 2004, 11:21
- Contact:
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Das wird nichts bringen, weil das nächste Teil-Inventory das Voll-Inventory überschreibt.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Who is online
Users browsing this forum: No registered users and 16 guests