Deinstallation Office 2010

Post Reply
novalee
Posts: 1
Joined: 29. Jan 2008, 16:44
Contact:

Deinstallation Office 2010

Post by novalee » 29. Nov 2010, 15:04

Hallo,

ich paketiere gerade ein Microsoft Office 2010 ProPlus.
Habe mit dem OAT eine benutzerdefinierte *.msp gebaut, die auch erfolgreich installiert wird.

Leider habe ich Probleme bei der Deinstallation, die ich folgendermassen aufrufe:

[SET:Deinstallation]
If %ErrorLevel% <> "0" Then "SET:DeInstallationError" EndIf
-Call "%EmpSourceDir%\setup.exe" /uninstall "ProPlus" /config "%EmpSourceDir%\ProPlus.WW\UNINSTALL.XML"

In der Uninstall.xml habe ich folgende Optionen eingetragen:
<Display Level="basic" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" />
<Logging Type="standard" Path="%systemdrive%\inst\EmpLog" Template="UNINSTOffice2010ProPlus.log" />

Leider lese ich nach der Deinstallation im EmpirumLogFile folgende Fehlermeldung:
Fehler 30066 beim Aufruf von setup.exe /uninstall ProPlus /config C:\EmpirumAgent\Packages\Microsoft Corporation\Office 2010 ProPlus\14.0\Source\ProPlus.WW\UNINSTALL.XML

Das Empirum-Logfile auf dem Rechner sagt folgendes:

"...Error: Product is not installed, therefore transition to MMode is unsafe for product: PROPLUS Type: 27::InstalledProductStateCorrupt.

Ensuring the install-state of setup controller files for all Products.
Opening registry key: SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall.
Opening registry key: HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Office14.PROPLUS.
Opening registry key: HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Office14.PROPLUS.
IsProductTransitionToMModeSafe: An exception was caught, therefore transition to MMode is unsafe for product:
Error: Product is not installed, therefore transition to MMode is unsafe for product: PROPLUS Type: 27::InstalledProductStateCorrupt.

Not showing message because suppress modal has been set. Title: 'Setupfehler', Message: 'Diese Produktinstallation wurde beschädigt. Führen Sie Setup erneut von der CD, DVD oder einer anderen ursprünglichen Installationsquelle aus.'
Message returned: 1
Error: Catalyst boot time check failed Type: 66::PreReqCheckFailure.

Catalyst execution finished: 11/29/2010 14:39:03. Return code: 30066. Exception caught: PreReqCheckFailure.
PERF: TickCount=456656 Name=RunSetup Description=End function"

Das Windows 7-Ereignisprotokoll allerdings, sagt, dass alles erfolgreich deinstalliert ist.

Kann mir hier jemand weiterhelfen?

Vielen Dank

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: Deinstallation Office 2010

Post by Hendrik_Ambrosius » 29. Nov 2010, 15:43

Gucken Sie mal hier, da finden Sie eine Lösung:
http://www.matrix42.de/forum/viewtopic.php?f=84&t=9068
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

IronStorm
Posts: 72
Joined: 19. Jun 2018, 08:19
Contact:

Re: Deinstallation Office 2010

Post by IronStorm » 29. May 2019, 15:03

Hendrik_Ambrosius wrote: 29. Nov 2010, 15:43 Gucken Sie mal hier, da finden Sie eine Lösung:
http://www.matrix42.de/forum/viewtopic.php?f=84&t=9068
Der link geht nicht mehr.
ich habe das gleiche Problem mit Office 2016.
Bitte um Hilfe.
Danke

MaMa82
Posts: 344
Joined: 10. Jun 2011, 13:56
Contact:

Re: Deinstallation Office 2010

Post by MaMa82 » 29. May 2019, 15:43

Hallo!

das ist natürlich unschön.
Da ist wohl die Installation korrupt.

Ist das Paket/Produkt reinstallierbar? (mittels Schalter /repair)

Im schlimmsten aller Fälle bleibt nur die Deinstallation via Microsoft FixIt vbs oder die Neuinstallation des Clients.
Grüße MaMa82


PS: EDV steht nicht für "Elektronische Datenverarbeitung", sondern vielmehr für "ENDE DER VERNUNFT"! :roll:

IronStorm
Posts: 72
Joined: 19. Jun 2018, 08:19
Contact:

Re: Deinstallation Office 2010

Post by IronStorm » 31. May 2019, 07:42

Das Paket ist leider weder über Paket (das ist aus dem neo42 Paketdepot) re noch deinstallierbar.
Es lässt sich nichtmal manuell deinstallieren :(

MaMa82
Posts: 344
Joined: 10. Jun 2011, 13:56
Contact:

Re: Deinstallation Office 2010

Post by MaMa82 » 31. May 2019, 08:04

Guten Morgen,

dann hilft wohl nur noch ein Cleanup-Paket anhand folgender Infos:
http://go.microsoft.com/?linkid=9815935
http://download.microsoft.com/download/ ... ve.diagcab

Ansonsten hilft vielleicht einmal zu kontrollieren, ob auch das korrekte Produkt deinstalliert wird (z.B. via Registry HKLM\Software\Microsoft\Windows\CurreentVersion\Uninstall\Office15.xxx oder so ähnlich).
Passt die Quelle nämlich nicht zur XML, die zur Installation verwendet wurde bzw zur Deinstallation verwendet wird, gibt es den beschriebenen Fehler ebenfalls.
xxx kann hierbei für Standard, ProPlus, ProPlusR usw usf stehen. (wichtig - Unterschied zwischen ProPlus und ProPlusR!)
Grüße MaMa82


PS: EDV steht nicht für "Elektronische Datenverarbeitung", sondern vielmehr für "ENDE DER VERNUNFT"! :roll:

Michael Tennert
Posts: 29
Joined: 23. Jan 2019, 16:32
Contact:

Re: Deinstallation Office 2010

Post by Michael Tennert » 03. Jun 2019, 22:55

IronStorm wrote: 31. May 2019, 07:42 Das Paket ist leider weder über Paket (das ist aus dem neo42 Paketdepot) re noch deinstallierbar.
Es lässt sich nichtmal manuell deinstallieren :(
Wenn Sie das Neo Abo haben, gibt es das Paket "Office Removal Tool" . Das würde ich immer bei einer Deinstallation - Installation von Office Paketen einbinden.

Das funktioniert.

IronStorm
Posts: 72
Joined: 19. Jun 2018, 08:19
Contact:

Re: Deinstallation Office 2010

Post by IronStorm » 15. Aug 2019, 11:11

Bekomm ich das silent ausgerollt???

Post Reply

Return to “Paketierung”

Who is online

Users browsing this forum: No registered users and 4 guests