Installation Advanced Agent per Anmeldescript
Moderator: MVogt
Hallo Zusammen,
gibt es einen "Best Practice" für die Verteilung von Advanced Agent?
Ich weiß das wir es in v12 pushen können, nur es halt blöd wenn die PC's nicht online sind
Habe auch gedacht ich baue mir ein filter, dann ein aktion die ein PUSH befehl ausführt, aber das funktioniert nicht, bzw. habe kein PUSH funktionen gefunden für den AGENT im Filter Aktion.
Am sonsten werde ich es über AD verteilen....
Gruß
Ben
gibt es einen "Best Practice" für die Verteilung von Advanced Agent?
Ich weiß das wir es in v12 pushen können, nur es halt blöd wenn die PC's nicht online sind
Habe auch gedacht ich baue mir ein filter, dann ein aktion die ein PUSH befehl ausführt, aber das funktioniert nicht, bzw. habe kein PUSH funktionen gefunden für den AGENT im Filter Aktion.
Am sonsten werde ich es über AD verteilen....
Gruß
Ben
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Gute Wahl
Die Erstellung ist auf der Empirum-v12-DVD im Dokument
MANUAL\\BestPractices\\empirum v12 advanced agent best practices_deu.pdf
beschrieben.
Die Erstellung ist auf der Empirum-v12-DVD im Dokument
MANUAL\\BestPractices\\empirum v12 advanced agent best practices_deu.pdf
beschrieben.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Gute Wahl
Die Erstellung ist auf der Empirum-v12-DVD im Dokument
MANUAL\\BestPractices\\empirum v12 advanced agent best practices_deu.pdf
beschrieben.
Die Erstellung ist auf der Empirum-v12-DVD im Dokument
MANUAL\\BestPractices\\empirum v12 advanced agent best practices_deu.pdf
beschrieben.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Haben Sie die denn vorher auch in das Verzeichnis kopiert vor dem Paketieren?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Im schlimmsten Fall dann als zweites Kommando nach dem Aufruf die Datei AgentConfig.xml nach c:\\windows\\system32\\empirum kopieren.
Sollte aber eigentlich automatisch erfolgen wenn die default-Datei im Template_SFX Verzeichnis liegt...
Sollte aber eigentlich automatisch erfolgen wenn die default-Datei im Template_SFX Verzeichnis liegt...
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Wenn Sie Empirum v12 einsetzten würde ich eher die Option "Selbstextrahierendes Paket" mit Rechtsklick auf einem Paket in der Depot-Definition der EMC nutzen.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Habe dazu spontan keine Idee mit dem Bulli Creator.
Vielleicht posten Sie mal Screenshots von den Bulli-Masken damit wir mal drübergucken können?
Vielleicht posten Sie mal Screenshots von den Bulli-Masken damit wir mal drübergucken können?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
anbei habe ich mal die Screenshots gehängt
- Attachments
-
- screenshots.zip
- Screenshots
- (131.62 KiB) Downloaded 245 times
-
- screenshots.zip
- (131.62 KiB) Downloaded 256 times
-
- screenshots.zip
- Screenshots
- (131.62 KiB) Downloaded 296 times
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Ich denke die Kommandozeile ist falsch.
Hier ist ja der komplette UNC-Pfad drin den man beim Aufruf aber gar nicht haben will!
Einfach mal "setup.exe /S2" oder so da eingeben.
Liegt eine setup.exe im INSTALL-Ordner? Sonst vorher da reinkopieren.
Hier ist ja der komplette UNC-Pfad drin den man beim Aufruf aber gar nicht haben will!
Einfach mal "setup.exe /S2" oder so da eingeben.
Liegt eine setup.exe im INSTALL-Ordner? Sonst vorher da reinkopieren.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Kann das überhaupt funktionieren?
Weil wenn ich den Advanced Agent normalerweise installiere wird folgendes Kommando über die EmpirumAgent.bat aufgerufen:
wenn ich jetzt bei der Command Line nur "/S2" eingebe und als execurable file die Setup.exe angebe bekomme ich folgende angehängte fehlermeldung.
Weil wenn ich den Advanced Agent normalerweise installiere wird folgendes Kommando über die EmpirumAgent.bat aufgerufen:
Code: Select all
Call \%EmpirumServer%Configurator$UserSetup.exe \%EmpirumServer%Configurator$Packagesmatrix42EmpirumAgent11.1InstallSetup.inf /S1
- Attachments
-
- fehler.zip
- (11.69 KiB) Downloaded 227 times
Who is online
Users browsing this forum: No registered users and 19 guests