Habe gerade versucht mittels Paket Wizard ein msi - Paket von Photoshop Elements 4.0 in ein Empirum Paket zu verwandeln. Da ich ein Neuling auf diesem Gebiet bin, benötige ich eure Hilfe. Ich bekomme bei der Installation des Pakets den Fehler 2803. Außerdem rebootet der Rechner wenn ich den Fehlercode mit OK wegklicke. Was bedeutet der Fehler 2803 und wie kann ich das rebooten unterdrücken?
Vielen Dank für eure Hilfe!
Hier noch meine setup.ini:
Code: Select all
&--91;SetupInfo&--93;
Author =Wolfgang Maier
CreationDate =07.03.2006 16&--58;57&--58;57
Description =
Method &--40;Diff/MSI/...&--41; = MSI
Tested on W2K/NT/... =
Dependencies =
Command line options =
Last Change =
Change of Version =
Change on Section =
&--91;VarDefInfo&--93;
; <Variable>, <Type&--58; 0=Computer 1=User>, <Allow NULL values&--58; 0=No 1=Yes>
&--91;Setup&--93;
Version=6.5
ShowCaption=1
BlockInput=0
&--91;Requirements&--93;
&--91;Application&--93;
ProductName=Adobe Photoshop Elements 4.0
ProductNameShort=Adobe Photoshop Elements 4.0
Version=4.0
VersionDirSuffix=100
Revision=0
ServiceRelease=0
DeveloperName=Adobe Systems Inc.
DeveloperNameShort=Adobe
SetupName=%ProductName% %Version% %SetupWizard%
Text1="%ProductName% %Version%", Arial, 30, , 00FFFF, 4, , LEFT BOLD ITALIC
Text2="%DeveloperName%", Arial, 24, , 00FFFF, 4, , LEFT BOLD ITALIC
Text8="%Company%", Arial, 18, , 00FFFF, 4, 10, RIGHT BOLD ITALIC
Text9="%InstallationFor% %WindowsUser%", Arial, 14, , 007F00, 4, -14, BOTTOM ITALIC LEFT
BackgroundColor=FF0000,000000
BackgroundPicture=
BackgroundSound=
Logo=
WizardPicture=
CopyDialogRect=0%, 77%, 100%, 100%, HCENTER
PrecopyFiles=
UserKeyName=%DeveloperName%\%ProductName%
MachineKeyName=%DeveloperName%\%ProductName%\%Version%
UninstallKeyName=%DeveloperNameShort% %ProductName%
UninstallDisplayName=%ProductName% %Version%
UninstallString=%ReinstallString% /U
ReinstallString="%CommonSetupDir%\Setup.exe" "%App%\%SetupInfDir%\Setup.inf"
ReinstallMode=1
HideUninstall=0
SrcDir=..
ApplicationDir=%ProgramFilesDir%\%ProductName%
SetupInfDir=Install_PhotoshopElements4
DataDir=%Personal%
DefaultUser=
DefaultCompany=
Prompts=
RunIfInstalled=
Readme=
Execute=
Expand=0
CopyExistingFiles=0
AskUninstallOld=1
AskLicence=0
AskInfo=0
AskFromCD=0
AskShared=0
AskMode=0
AskDir=0
AskDataDir=0
AskUser=0
UseCompany=1
UseProductID=0
ProductIDLength=0
UseCheckmarks=2
AutoIniFileMapping=0
ShellLinks=1
CommonShellLinks=1
CreateUnresolvableShellLinks=1
ShowShellFolder=
LicenceText=
InfoText=
RequirementsText=
UseStringSection=Strings&--58;09
UseSysStringSection=SysStrings&--58;09
PrintServer=
PrintEnvironment=
DateWarning=1
SizeWarning=1
Reboot=0
PreventExternalReboot=0
StartServicesOnReboot=0
ReplaceRunOnce=0
DisableCancelButton=1
ShowEndMessage=1
SetupExtDll=
SetupHookFunc=
ShowFullPath=0
&--91;Admin&--93;
AdminSetup=0
ApplicationDir=
AskDir=1
AskOptions=0
ClientSrcDir=Client
UninstallString=%ReinstallString% /U
ReinstallString="%Src%\..\..\..\..\User\Setup.exe" "%Src%\%SetupInfDir%\Setup.inf"
&--91;Client&--93;
ClientDir=
AskDir=0
AskOptions=1
UseUninstallStringFromApplication=1
Reboot=0
&--91;Workstation&--93;
AskOptions=0
AdminUninstallLink=0
AdminUninstallLinkName=%ProductName% %Version%
UserSetupLink=0
UserSetupLinkName=%ProductName% %Version%
&--91;Strings&--58;07&--93;
Disk1=Diskette 1&--58; Installationsdiskette
InstallationFor=Installation für&--58;
InstallerDesc=Dienstprogramm zum Installieren einzelner Komponenten.
InstallerName=Installationsprogramm
ProductDesc=
SetupWizard=Installations-Assistent
Uninstallation=deinstallieren
ErrorLogMessage=Die Installation/Deinstallation wurde mit einer Fehlermeldung abgebrochen!
&--91;Strings&--58;09&--93;
Disk1=Diskette 1&--58; Installation disk
InstallationFor=Installation for&--58;
InstallerDesc=Service program to install single components.
InstallerName=Setup program
ProductDesc=
SetupWizard=Installation Wizard
Uninstallation=Uninstallation
ErrorLogMessage=The installation/uninstallation aborted with an error message!
&--91;SysStrings&--58;07&--93;
Users=Benutzer
&--91;SysStrings&--58;09&--93;
Users=Users
&--91;Environment&--93;
InstSuccessMessage1031=Installationsvorgang erfolgreich abgeschlossen.
ReInstSuccessMessage1031=Die Konfiguration wurde erfolgreich abgeschlossen.
UnInstSuccessMessage1031=Das Entfernen wurde erfolgreich abgeschlossen.
InstSuccessMessage1033=Installation operation completed successfully.
ReInstSuccessMessage1033=Configuration completed successfully.
UnInstSuccessMessage1033=Removal completed successfully.
CommonSetupDir=%CommonFilesDir%\Setup%SetupBits%
V_MachineValuesPath=%SoftwareDepotServerName%\Values$\MachineValues\%DomainName%
V_UserValuesPath=%HKLM,"Software\matrix42\Software Depot","HomeServer"%\Values$\UserValues\%UserDomain%
; Maschinenabhängige Variablen
; machine dependent variables
;VM_<Variable>=%%%V_MachineValuesPath%\%ComputerName%.ini,%ComputerName%,<Variable>%%
; Userabhängige Variablen
; user dependent variables
;VU_<Variable>=%%%V_UserValuesPath%\%WindowsUser%.ini,%WindowsUser%,<Variable>%%
; !!! Setzen der entsprechenden ReplaceEnv Befehle für die Variablen im Abschnitt &--91;Product&--93; nicht vergessen!!!
; !!! Don't forget to set the appropriate ReplaceEnv instructions for the variables in the section &--91;Product&--93;!!!
&--91;Prompts&--93;
&--91;Services&--93;
&--91;EventSources&--93;
&--91;Disks&--93;
1=%Disk1%
&--91;UserKeyNames&--93;
&--91;Icons&--93;
Product = %ProductNameShort%.ico, 0, 000000, ICON
&--91;Options&--93;
Installer = %InstallerName%, COPYALWAYS, Installer, "%InstallerDesc%"
Product = %ProductName%, COPYALWAYS, Product, "%ProductDesc%"
&--91;OptionDependencies&--93;
&--91;OptionGroups&--93;
&--91;Installer&--93;
1&--58;..\..\..\..\User\Setup.exe, %CommonSetupDir%, OPTIONAL USEFILENAME DIRECTORY NOSIZEWARNING SETUP, 0
1&--58;..\..\..\..\User\SetupDeu.chm, %CommonSetupDir%, OPTIONAL USEFILENAME DIRECTORY NOSIZEWARNING SETUP, 0
1&--58;..\..\..\..\User\SetupEnu.chm, %CommonSetupDir%, OPTIONAL USEFILENAME DIRECTORY NOSIZEWARNING SETUP, 0
1&--58;..\..\..\..\User\Mx42SynSem.dll, %System%, OPTIONAL USEFILENAME DIRECTORY NOSIZEWARNING SETUP, 0
1&--58;%SetupInfDir%\Setup.inf, , NORMAL, 0
&--91;FileCheckMachine&--93;
ReplaceENV V_MachineValuesPath
If DoesFileExist &--40;"%V_MachineValuesPath%\%ComputerName%.ini"&--41; == "0" Then "FileIsntThere" EndIf
&--91;FileCheckClient&--93;
ReplaceENV V_UserValuesPath
If "%UserDomain%" <> "%ComputerName%" Then "CheckClientFile" EndIf
&--91;CheckClientFile&--93;
If DoesFileExist &--40;"%V_UserValuesPath%\%WindowsUser%.ini"&--41; == "0" Then "FileIsntThere" EndIf
&--91;FileIsntThere&--93;
ErrorLogMsg <Error Text>
Abort
&--91;Product&--93;
;--FileCheckMachine, MACHINE
;--FileCheckClient, CLIENT
;ReplaceEnv <Variable>
--Set&--58;Product, DONTDELETE
--Reg&--58;OnUninstallProduct, DELETE
--Reg&--58;Product, DONTDELETE
--Ini&--58;Product, DONTDELETE
--Security&--58;Product
--Set&--58;Uninstall, DELETE
&--91;Set&--58;Product&--93;
IF DoesRegKeyExist
&--40;"HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\&--123;EBB7C1C1-D439-4D9B-9FDC-954C10F266B0&--125;,UnInstallString"&--41;
== "1" Then "RepairMSI" Else "InstallMSI" EndIf
&--91;RepairMSI&--93;
AddMeter 50
Call MsiExec /F "%SRC%\PhotoshopElements4.msi" /qr /L "%Temp%\MSI_%ProductName%.%Version%.%Revision%.log"
IF DoesTextInFileExist &--40;"%ReInstSuccessMessage1033%", "%Temp%\MSI_%ProductName%.%Version%.%Revision%.log"&--41; == "0"
Then "AbortMSIInst" EndIf
&--91;InstallMSI&--93;
AddMeter 50
Call MsiExec /I"%SRC%\PhotoshopElements4.msi" /qr /L "%Temp%\MSI_%ProductName%.%Version%.%Revision%.log"
IF DoesTextInFileExist &--40;"%InstSuccessMessage1033%", "%Temp%\MSI_%ProductName%.%Version%.%Revision%.log"&--41; == "0" Then
"AbortMSIInst" EndIf
&--91;Set&--58;Uninstall&--93;
If DoesTextInFileExist &--40;"%UnInstSuccessMessage1033%","%Temp%\MSI_%ProductName%.%Version%.%Revision%.log"&--41; == "0"
Then "AbortMSIUnInst" EndIf
-Call MsiExec /X&--123;EBB7C1C1-D439-4D9B-9FDC-954C10F266B0&--125; /qr /L "%Temp%\MSI_%ProductName%.%Version%.%Revision%.log"
-AddMeter 50
&--91;AbortMSIInst&--93;
ErrorLogMsg %ErrorLogMessage% ErrorLevel&--58; %ErrorLevel%
Abort
&--91;AbortMSIUnInst&--93;
Abort
-ErrorLogMsg %ErrorLogMessage% ErrorLevel&--58; %ErrorLevel%
&--91;Reg&--58;OnUninstallProduct&--93;
&--91;Reg&--58;Product&--93;
&--91;Ini&--58;Product&--93;
&--91;Security&--58;Product&--93;
&--91;Shell&--58;Installer&--93;
;%ProductName%\%ProductName% Setup, %ReinstallString%
;%ProductName%\%ProductName% %Uninstallation%, %UninstallString%, , , , , 1, ,
&--91;Shell&--58;Product&--93;
