Subdepot auf DHCP-Server (mehrere Subnetze)
Moderator: MVogt
Subdepot auf DHCP-Server (mehrere Subnetze)
Moin,
wir haben zwei Subnetze, die wir gerne mit einem Depot-Server abfrühstücken wollen, welcher auf dem DHCP-Server für beide Netze steht.
DebugView auf dem Server sagt nichts, da arbeit nur der SyncMonitor.
Über DBUtil habe ich die Config für den Server schon diverse Male drüber installiert.
Habe Option 60 mit "PXEClient" gesetzt, bekomme aber dann "ProxyDHCP did not reply on Port 4011".
Setze ich 66 und 67, dann bekommt er wenigstens eine IP, aber dann taucht TFTP auf und wird mit "TFTP open timeout".
60+66+67 = "ProxyDHCP did not reply on Port 4011"
Anbei auch die Config in DBUtil.
Server: 2008 (Kein R2), Empirum 15.1
Gruß
Jens
wir haben zwei Subnetze, die wir gerne mit einem Depot-Server abfrühstücken wollen, welcher auf dem DHCP-Server für beide Netze steht.
DebugView auf dem Server sagt nichts, da arbeit nur der SyncMonitor.
Über DBUtil habe ich die Config für den Server schon diverse Male drüber installiert.
Habe Option 60 mit "PXEClient" gesetzt, bekomme aber dann "ProxyDHCP did not reply on Port 4011".
Setze ich 66 und 67, dann bekommt er wenigstens eine IP, aber dann taucht TFTP auf und wird mit "TFTP open timeout".
60+66+67 = "ProxyDHCP did not reply on Port 4011"
Anbei auch die Config in DBUtil.
Server: 2008 (Kein R2), Empirum 15.1
Gruß
Jens
- Attachments
-
- 1.PNG
- (40.97 KiB) Downloaded 287 times
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
Mal testen:
Dienste-Modus auf "Nur PXE" und dann:
DHCP-Option 60=PXEClient
DHCP-Option 43=IP-Adresse des Servers als String aus Generator (\ADDONS\DHCPOPTION43STRINGGENERATOR\pxeopt43gen.exe)
Dienste-Modus auf "Nur PXE" und dann:
DHCP-Option 60=PXEClient
DHCP-Option 43=IP-Adresse des Servers als String aus Generator (\ADDONS\DHCPOPTION43STRINGGENERATOR\pxeopt43gen.exe)
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
Moin,
vielen Dank schonmal. Hat aber trotzdem nicht geklappt. Bekomme die Meldung "Could not locate Boot Server".
Viele Grüße
Jens
vielen Dank schonmal. Hat aber trotzdem nicht geklappt. Bekomme die Meldung "Could not locate Boot Server".
Viele Grüße
Jens
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
Optionen 66+67 hatten Sie gelöscht?!
Eventuell Tippfehler bei Option 43? Ist ja ziemlich kryptisch der String...
Eventuell Tippfehler bei Option 43? Ist ja ziemlich kryptisch der String...
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
Ja, die anderen Optionen hatte ich wieder entfernt. Vertippt habe ich mich nicht, da er im PXE-Screen die richtige IP anzeigt, zu der er sich verbinden möchte.
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
Erscheint im DebugView-Log des PXE Dienstes die Anfrage des Clients (MAC-Adr.)?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
Nein, im DebugView sind keine Einträge vom PXE-Dienst. Einzig der SyncMonitor taucht dort auf.
Habe die Dienste auch schon mal deinstalliert und neuinstalliert.
Habe die Dienste auch schon mal deinstalliert und neuinstalliert.
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
Dass gar keine Einträge dort sind kann nicht sein. Haben Sie vielleicht capture global nicht an?
http://helpfiles.matrix42-web.de/2013_D ... =debugview
http://helpfiles.matrix42-web.de/2013_D ... =debugview
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
Ich finde das Tool ja schrecklich, mal funktioniert es, mal nicht. Nachdem es ein paar Mal abgestürzt ist, beim deaktivieren vom Global Capture, hat es jetzt endlich geklappt und er hat mir folgendes ausgeworfen:
[2648] MATRIXPXE: : DSIK_TRY_LOGIN_EVENT
[2648] MATRIXPXE: DHCP : SETUP FILE CHANGE NAME TO \\DC01\EmpInst$\Wizard\OS\PXEServerConfig/dhcp_setup_DC01.ini
[2648] MATRIXPXE: DHCP : SETUP FILE \\DC01\EmpInst$\Wizard\OS\PXEServerConfig/dhcp_setup_DC01.ini DOES NOT EXIST!
Viele Grüße
[2648] MATRIXPXE: : DSIK_TRY_LOGIN_EVENT
[2648] MATRIXPXE: DHCP : SETUP FILE CHANGE NAME TO \\DC01\EmpInst$\Wizard\OS\PXEServerConfig/dhcp_setup_DC01.ini
[2648] MATRIXPXE: DHCP : SETUP FILE \\DC01\EmpInst$\Wizard\OS\PXEServerConfig/dhcp_setup_DC01.ini DOES NOT EXIST!
Viele Grüße
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
d.h. der Dienst startet überhaupt nicht weil er seine Konfiguration nicht finden kann.
Im Screenshot war er auf "online" konfiguriert. Ist er nun auf "offline"?
ggf online setzen und neu starten.
Im Screenshot war er auf "online" konfiguriert. Ist er nun auf "offline"?
ggf online setzen und neu starten.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
Moin,
bekomme jetzt folgende Meldungen:
bekomme jetzt folgende Meldungen:
Code: Select all
[5072] MATRIXPXE: : DSIK_DHCP_TIMER_EVENT
[5072] MATRIXPXE: ServerName: DC01
[5072] MATRIXPXE: ServerName found in DB.
[5072] GetEmpOption: PXE_UseKnownDevicesOnly = 0
[5072] MATRIXPXE: PXE_UseKnownDevicesOnly is FALSE
[5072] GetEmpOption: PXE_ResponseDelay = 0
[5072] MATRIXPXE: PXE_ResponseDelay is FALSE
[5072] GetEmpOption: PXE_InformAckDhcpVarOnly = 0
[5072] MATRIXPXE: PXE_InformAckDhcpVarOnly is FALSE
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
OK, und wenn jetzt beim Boot des Clients die MAC-Adresse im Log nicht auftaucht kommt die PXE-Anfrage beim Server überhaupt nicht an => DHCP-Optionen wie unten beschrieben anpassen.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Subdepot auf DHCP-Server (mehrere Subnetze)
Moin,
nachdem wir den Master-Server neugestartet hatten, läuft das Subdepot nun auch.
Danke & Viele Grüße
Jens
nachdem wir den Master-Server neugestartet hatten, läuft das Subdepot nun auch.
Danke & Viele Grüße
Jens
Who is online
Users browsing this forum: No registered users and 3 guests