installation windows 10

Moderator: jknoth

Post Reply
mkeller
Posts: 9
Joined: 22. Jan 2016, 10:56
Contact:

installation windows 10

Post by mkeller » 22. Jan 2016, 15:42

Hello,

i'm running Matrix42 version 16.0.2

I have imported windows 10 and created a new EPE with the kernelparameter ramdisk_size=524288 and created a template for the OS
Now when i start a client with pxe the installation is started the os is copied and after the reboot i get the message to select the OS you want to install. and click next.

When i click next the installation runs fine and windows 10 is installed.
What do i need to do so that the installation runs automatically?

Thanks in advance
Marco

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: installation windows 10

Post by Hendrik_Ambrosius » 23. Jan 2016, 21:56

Looks like you selected the wrong Windows edition in the OS template, e.g. Pro instead of Enterprise.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

mkeller
Posts: 9
Joined: 22. Jan 2016, 10:56
Contact:

Re: installation windows 10

Post by mkeller » 25. Jan 2016, 09:44

Hello Hendrik,

Thanks for your response!
I have one OS package imported and that is the on in the template, i don't have another option to chose in the template.

The imported version is the enterprise version.
but when i look at the pxe log i see it is copying win10 x64 pro en-US SP0.

here is the pxe log:
22.01.2016 14:54:40 New-/Reinstallation finished successfully.
22.01.2016 14:54:08 Operating System installed successfully.
22.01.2016 14:54:02 [Domainjoin] Joining machine in specified OU: successfull.
22.01.2016 14:07:43 [Eis32] Performing reboot.
22.01.2016 14:07:43 [Eis32] Total elapsed time: 13 min
22.01.2016 14:07:42 [Eis32] Selected SKU: Windows 10 Enterprise
22.01.2016 14:07:42 [Eis32] Preparing netdom.ps1 based post-join-method to domain topcat.catenagroup.com
22.01.2016 14:07:41 [Eis32] EditionID file ei.cfg exists on source media
22.01.2016 14:07:41 [Eis32] ProductID file pid.txt does NOT exist on source
22.01.2016 14:07:41 [Eis32] ProductID key is defined in OS-template - and will be used
22.01.2016 14:07:38 [Eis32] Profile Latitude E5440 identified!
22.01.2016 14:07:38 [Eis32] MachineIdNum: 204769_122525
22.01.2016 14:07:38 [Eis32] Sound Adapter : No Sound Adapter detected!
22.01.2016 14:07:38 [Eis32] Sound Adapter : No PCI-Sound Adapter detected!
22.01.2016 14:07:38 [Eis32] Display Adapter: LatE5440-Disp
22.01.2016 14:07:37 [Eis32] Storage Adapter: RAID detected with: 32902-10282-4136-1502
22.01.2016 14:07:37 [Eis32] Network Adapter: LatE5440_ethernet
22.01.2016 14:07:37 [Eis32] Performing hardware detection...
22.01.2016 14:07:37 [Eis32] Total elapsed time: 13 min
22.01.2016 14:07:37 [Eis32] WIN8_SETUPKEY: [Setup-key-helper] executed
22.01.2016 14:07:36 [Eis32] Transferring Empirum components [about 1 minute...]
22.01.2016 14:07:36 [Eis32] Transferring WinPE patch files [about 1 minute...]
22.01.2016 14:07:36 [Eis32] File copy process successful.
22.01.2016 14:07:36 [Eis32] Total elapsed time: 13 min
22.01.2016 13:59:39 [Eis32] Using extracted pe sources
22.01.2016 13:59:39 [Eis32] Transferring Sys/WinPE files [about 8 minutes...]
22.01.2016 13:59:39 [Eis32] Using WinPE 4.x or later for OS installation
22.01.2016 13:54:38 [Eis32] Transferring OS installation source files [about 15 minutes...]
22.01.2016 13:54:38 [Eis32] Transferring OS sources from: crdsvrmxsd.topcat.catenagroup.com win10/x64/pro/0/en-US
22.01.2016 13:54:37 [Eis32] Copying installation files.
22.01.2016 13:54:37 [Eis32] Total elapsed time: 0 min
22.01.2016 13:54:35 [Eis32] Using service partition: 2 on disk: 0 drive letter: S
22.01.2016 13:54:35 [Eis32] Using system partition: 1 on disk: 0 drive letter: C
22.01.2016 13:54:35 [Eis32] Assigning drive letters...
22.01.2016 13:54:35 [Eis32] SSD Disk/MB: 0/244198 parttypes/MB: 7/140000 7/12000 0/0 0/0 free/used: 92198/152000
22.01.2016 13:54:35 [Eis32] Hard disk formating/partitioning successful.
22.01.2016 13:54:33 [Eis32] Created partition: 2 on disk: 0 with size: 12000
22.01.2016 13:54:33 [Eis32] Creating partition: 2 on disk: 0 with size: 12000
22.01.2016 13:54:33 [Eis32] Created partition: 1 on disk: 0 with size: 140000
22.01.2016 13:54:32 [Eis32] Creating partition: 1 on disk: 0 with size: 140000
22.01.2016 13:54:32 [Eis32] Creating all partitions...
22.01.2016 13:54:32 [Eis32] Check partition allocation plan...
22.01.2016 13:54:32 [Eis32] SSD Disk/MB: 0/244198 parttypes/MB: 0/0 0/0 0/0 0/0 free/used: 244198/0
22.01.2016 13:54:30 [Eis32] Disk 0 is MBR partitioned...
22.01.2016 13:54:30 [Eis32] Deleting partitions...
22.01.2016 13:54:28 [Eis32] SSD Disk/MB: 0/244198 parttypes/MB: 7/244196 0/0 0/0 0/0 free/used: 0/244196
22.01.2016 13:54:28 [Eis32] Preparing hard disks.
22.01.2016 13:54:28 [Eis32] Entering MBR/Legacy mode
22.01.2016 13:54:28 [Eis32] Target device for OS-Installation: /dev/sda
22.01.2016 13:54:28 [Eis32] TCP/IP address: DHCP
22.01.2016 13:54:28 [Eis32] Domain/Workgroup: Dom: Topcat
22.01.2016 13:54:28 [Eis32] Computer name: CRDLT091
22.01.2016 13:54:28 [Eis32] Image name: win10 x64 pro en-US SP0
22.01.2016 13:54:28 [Eis32] Total elapsed time: 0 min
22.01.2016 13:54:28 [Eis32] Connected Empirumserver: crdsvrmxsd IP: 10.128.16.124
22.01.2016 13:54:28 [Eis32] Current client mac address: ECF4BB5F6710 IP: 10.128.18.91
22.01.2016 13:54:28 [Eis32] Empirum OS-Installation script Ver. 01.53
22.01.2016 13:54:28 [Eis32] Empirum Eis32 Ver. 16.0.2.41
22.01.2016 13:54:28 [TimeOutThread] 22.01.2016 13:54.27 - Eis32 Time Out Thread: Start!
22.01.2016 13:54:28 [seldest] entering runlevel
22.01.2016 13:54:27 [getimage] entering runlevel
22.01.2016 13:54:27 [getconfig] Set variable WINPE_WIMBOOT from INTERNAL_OS_INSTALLER_CONFIG
22.01.2016 13:54:27 [getconfig] Set variable REINSTALLALLOW from INTERNAL_OS_INSTALLER_CONFIG
22.01.2016 13:54:27 [getconfig] Set variable DODM from INTERNAL_OS_INSTALLER_CONFIG
22.01.2016 13:54:27 [getconfig] Set variable DOCP from INTERNAL_OS_INSTALLER_CONFIG
22.01.2016 13:54:27 [getconfig] Set variable WINPE_VERSION from INTERNAL_OS_INSTALLER_CONFIG
22.01.2016 13:54:26 [getconfig] entering runlevel
22.01.2016 13:54:24 [raidsetup] entering runlevel
22.01.2016 13:54:24 [TimeOutThread] 22.01.2016 13:54.23 - Eis32 Time Out Thread: End!
22.01.2016 13:54:22 [TimeOutThread] 22.01.2016 13:54.21 - Eis32 Time Out Thread: Start!
22.01.2016 13:54:21 [logon] entering runlevel
22.01.2016 13:54:21 [networking ] Using DNS from bootimage configuration
22.01.2016 13:54:21 [networking ] Setting ServerIP in /etc/hosts
22.01.2016 13:54:21 [sshd ] entering runlevel
22.01.2016 13:54:21 [epelog ] Empty mount point. Logs are saved local as /tmp/
22.01.2016 13:54:21 [networking ] entering runlevel
22.01.2016 13:54:21 [networking ] Setting primary interface in Local Area Network
22.01.2016 13:54:21 [modsetup ] entering runlevel
22.01.2016 13:54:21 [epelog ] Optionally insert an USB device now. SPY and log will be copied
22.01.2016 13:54:21 [epelog ] EPE will automatically continue with the detection in 10 seconds
22.01.2016 13:54:21 [startx ] Browser executed successfully.
22.01.2016 13:54:21 [startx ] entering runlevel
22.01.2016 13:54:21 [httpd ] entering runlevel
22.01.2016 13:54:21 [lo ] entering runlevel
22.01.2016 13:54:21 [syslog ] Starting syslogd...
22.01.2016 13:54:21 [syslog ] Starting klogd...
22.01.2016 13:54:21 [boot ] msg_enter
22.01.2016 13:54:21 [uncrypt ] Decryption completed successfully.
22.01.2016 13:54:21 [uncrypt ] Decrypting ...
22.01.2016 13:54:21 [uncrypt ] Reading disk.ini...
22.01.2016 11:05:35 New-/Reinstallation finished successfully.
22.01.2016 11:04:55 Operating System installed successfully.
22.01.2016 11:04:46 [Domainjoin] Joining machine in specified OU: successfull.
22.01.2016 10:38:34 [Eis32] Performing reboot.
22.01.2016 10:38:34 [Eis32] Total elapsed time: 12 min
22.01.2016 10:38:33 [Eis32] Selected SKU: Windows 10 Enterprise
22.01.2016 10:38:33 [Eis32] Preparing netdom.ps1 based post-join-method to domain topcat.catenagroup.com
22.01.2016 10:38:32 [Eis32] EditionID file ei.cfg exists on source media
22.01.2016 10:38:32 [Eis32] ProductID file pid.txt does NOT exist on source
22.01.2016 10:38:32 [Eis32] ProductID key is defined in OS-template - and will be used

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: installation windows 10

Post by Hendrik_Ambrosius » 25. Jan 2016, 09:53

You can choose the edition in the template as shown in the screenshot.
Attachments
OSEdition.zip
Screenshot
(49.18 KiB) Downloaded 399 times
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

mkeller
Posts: 9
Joined: 22. Jan 2016, 10:56
Contact:

Re: installation windows 10

Post by mkeller » 25. Jan 2016, 10:16

Hi,

Where can i find that?
In my Configuration --> OS Installer is don't see it.

See attachment
Capture.zip
(28.19 KiB) Downloaded 433 times

mkeller
Posts: 9
Joined: 22. Jan 2016, 10:56
Contact:

Re: installation windows 10

Post by mkeller » 25. Jan 2016, 10:21

The only thing i can find is in general language,

see attachment
Capture.zip
(28.36 KiB) Downloaded 438 times

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: installation windows 10

Post by Hendrik_Ambrosius » 25. Jan 2016, 10:33

Click on the name of the template (first line above "general") and then double click on any item in the right pane.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

mkeller
Posts: 9
Joined: 22. Jan 2016, 10:56
Contact:

Re: installation windows 10

Post by mkeller » 25. Jan 2016, 10:36

That is my problem.

when i click on the first line (name of the template) then the right pane stay's empty don't see anything in the right pane also when i select another template or create a new template the right pane stay's empty....

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: installation windows 10

Post by Hendrik_Ambrosius » 25. Jan 2016, 10:58

There is something very wrong in your environment then.
I suggest you open a ticket with our support.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

mkeller
Posts: 9
Joined: 22. Jan 2016, 10:56
Contact:

Re: installation windows 10

Post by mkeller » 25. Jan 2016, 11:34

Okay, thanks Hendrik,

I have created a ticket for this.

Post Reply

Return to “OS-Installer”

Who is online

Users browsing this forum: No registered users and 1 guest