Packaging SAP GUI 7.50
Packaging SAP GUI 7.50
I try to packaging SAP GUI but when i try install it , ishould do all steps manual. i wan it installed automatic how can i do it?
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Packaging SAP GUI 7.50
The call in the setup.inf should look like this:
Call "%Src%\Setup\NwSapSetup.exe" /Package:"Standard" /Silent
You can create the package with the SAPAdmin tool provided by SAP.
Call "%Src%\Setup\NwSapSetup.exe" /Package:"Standard" /Silent
You can create the package with the SAPAdmin tool provided by SAP.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Packaging SAP GUI 7.50
Thank You very much. But it dosen't Work.
Could You please look at my Setup.ini Code .
Could You please look at my Setup.ini Code .
Code: Select all
;****************************************************************************************************************
;* *
;* Copyright (C) 2010-2018 neo42 GmbH. All rights reserved. *
;* *
;* neo42 is a registered trademark of neo42 GmbH. *
;* Matrix42 and Empirum are registered trademarks of Matrix42 AG. *
;* All other marks and names mentioned herein are trademarks of their respective companies and organisations. *
;* *
;* Any other use, including disclosure to third parties, publication and dissemination is prohibited. *
;* This applies both to the entire script as well as parts of it. Subject to change. *
;* *
;* Terms and conditions see: http://www.neo42.de/agb/ *
;* *
;* If you have questions or problems, please send an email to paketdepot@neo42.de. *
;* *
;****************************************************************************************************************
[SetupInfo]
Author = Emperum Test
CreationDate = 14.12.2018
InventoryID =
Description = SAP SE SAP GUI for Windows 7.50 (Patch 8 Hotfix 1) 7.50 Compilation 2 DEU
Method = SAP Front-End Installer
Tested on = Win7 x64, Win10 x64
Dependencies =
Command line options = /S2
Last Change = 14.12.2018
Build = 0
[Setup]
Version=14.2
ShowCaption=1
BlockInput=0
Platform=x86
[Application]
ProductName=SAP GUI for Windows 7.50 (Patch 8 Hotfix 1)
DeveloperName=SAP SE
Version=7.50 Compilation 2
Revision=0
;$$$neoDesign1
SetupName=%Packagename% %SetupWizard%
Text1="%Packagename%", Arial, 32, , 000000, 25#, 25#, LEFT BOLD
BackgroundColor=ffa0a0,ffffff
CopyDialogRect=25#, -25#, 0, 0, NORMAL
Logo=Logo.bmp, -25#, -25#, 0, 0, FFFFFF, TRANSPARENT
UninstallDisplayIcon=%App%\%SetupInfDir%\Setup.ico,0
;$$$neoDesign2
;$$$neoRegistry1
UserKeyName=neoPackages\%DeveloperName%\%ProductName%
MachineKeyName=neoPackages\%DeveloperName%\%ProductName%\%Version%
UninstallKeyName=neoPackage %DeveloperName% %ProductName% %Version%
UninstallDisplayName=neoPackage %DeveloperName% %ProductName% %Version%
;$$$neoRegistry2
UninstallString=%ReinstallString% /U
ReinstallString="%CommonSetupDir%\Setup.exe" "%App%\%SetupInfDir%\Setup.inf"
ReinstallMode=0
SrcDir=..
ApplicationDir=%ProgramFilesDir%\neoPackages\%DeveloperName%\%ProductName%\%Version%
SetupInfDir=neoInstall
DataDir=%Personal%
AskUninstallOld=1
ShellLinks=1
CommonShellLinks=1
CreateUnresolvableShellLinks=1
UseStringSection=Strings:09
UseSysStringSection=SysStrings:09
DateWarning=1
SizeWarning=1
Reboot=0
PreventExternalReboot=1
StartServicesOnReboot=0
CallTimeOut=3600
AbortAfterCallTimeOut=1
DisableCancelButton=1
ShowEndMessage=1
EndMessage=%EndMessageDesc%
[Strings:07]
Disk1=Installationsmedium 1
EndMessageDesc=Die Installation wurde erfolgreich abgeschlossen!
ErrorLogMessage=Die Installation/Deinstallation wurde mit einer Fehlermeldung abgebrochen!
InstallationFor=Installation fuer:
InstallerDesc=Dienstprogramm zum Installieren einzelner Komponenten.
InstallerName=Installationsprogramm
SetupWizard=Installations-Assistent
Uninstallation=deinstallieren
ErrorText=Fehler
CallingText=beim Aufruf von
[Strings:09]
Disk1=Installation media 1
EndMessageDesc=Installation was completed successfully!
ErrorLogMessage=The installation/uninstallation aborted with an error message!
InstallationFor=Installation for:
InstallerDesc=Service program to install single components.
InstallerName=Setup program
SetupWizard=Installation Wizard
Uninstallation=Uninstallation
ErrorText=Error
CallingText=launching
[SysStrings:07]
Users=Benutzer
LANG=DEU
LANGID=1031
LANGTEXT=Deutsch
[SysStrings:09]
Users=Users
LANG=ENU
LANGID=1033
LANGTEXT=English
[Environment]
CommonSetupDir=%CommonFilesDir%\Setup%SetupBits%
Packagename=%DeveloperName% %ProductName% %Version%
DisplayVersion=7.50 Compilation 2
Uninstallkey=SAPGUI
InstallLocation=%ProgramFilesDir%\SAP\SapSetup\Setup
DateDD=left("%sysdate%",2)
DateMM=mid("%sysdate%",3,2)
DateYY=right("%sysdate%",4)
TimeHH=left("%LongSysTime%",2)
TimeMM=mid("%LongSysTime%",3,2)
TimeSS=right("%LongSysTime%",2)
InstLogFile=%APP%\Install.%DateYY%-%DateMM%-%DateDD%_%TimeHH%-%TimeMM%-%TimeSS%.log
UninstLogFile=%APP%\Uninstall.%DateYY%-%DateMM%-%DateDD%_%TimeHH%-%TimeMM%-%TimeSS%.log
RegUninstallKey=HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\%Uninstallkey%,DisplayName
RegDisplayVersion=%%HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\%Uninstallkey%,DisplayVersion%%
InstPara= "%Src%\neoSource\SAPALL.exe" /Package:"SAPALL" /nodlg
UninstProg="%ProgramFilesDir%\SAP\SapSetup\Setup\NwSapSetup.exe"
UninstPara=%UninstProg% /product="???" /nodlg /uninstall
[Processes]
APP1=saplogon.exe, Saplogon, KillProcess Abort
[Disks]
1=%Disk1%
[Options]
Installer = %InstallerName%, COPYALWAYS, Installer, "%InstallerDesc%"
neoProduct = %ProductName%, COPYALWAYS, neoProduct, "%ProductDesc%"
[Installer]
1:..\..\..\..\User\Setup.exe, %CommonSetupDir%, OPTIONAL USEFILENAME DIRECTORY NOSIZEWARNING SETUP, 0
1:..\..\..\..\User\SetupDeu.chm, %CommonSetupDir%, OPTIONAL USEFILENAME DIRECTORY NOSIZEWARNING SETUP, 0
1:..\..\..\..\User\SetupEnu.chm, %CommonSetupDir%, OPTIONAL USEFILENAME DIRECTORY NOSIZEWARNING SETUP, 0
1:%SetupInfDir%\Setup.inf, , NORMAL, 0
1:%Temp%\Setup64.exe, %CommonSetupDir%\Setup.exe, OPTIONAL NOSIZEWARNING SETUP ALWAYS WINDOWS64, 0
1:%SetupInfDir%\Logo.bmp, , NORMAL, 0
1:%SetupInfDir%\Setup.ico, , NORMAL, 0
[AppNotExistMsg]
-Exit
-SetReboot 2
-ErrorLogMsg The application is not present. Uninstallation is not executed. Only setup.inf is deleted and package is unregistered. Exit!
[AppNotExist]
If DoesRegKeyExist ("%RegUninstallKey%") == "0" Then "AppNotExistMsg" EndIf
[AppExistMsg]
ErrorLogMsg Application is already present. Installation is not executed. Only setup.inf is copied and package is registered. Exit!
SetReboot 2
Exit
[AppExist]
ReplaceEnv RegDisplayVersion
If %RegDisplayVersion% >= %DisplayVersion% & DoesRegKeyExist ("HKLM,Software\%MachineKeyName%\Setup,ProductName") == "0" Then "AppExistMsg" EndIf
[neoProduct]
#AppExist, MACHINE DONTDELETE
AskKillProcesses 600, APP1
#Set:neoProduct, DONTDELETE
#Set:neoUninstall, DELETE
#Product
-AskKillProcesses 600, APP1
#AppNotExist, MACHINE DELETE
[Set:neoProduct]
If DoesRegKeyExist ("%RegUninstallKey%") == "1" Then "neoReinstall" Else "neoInstall" EndIf
[neoReinstall]
AddMeter -1
Call %UninstPara%
If "%ErrorLevel%" == "3010" Then "neoRebootRequired" EndIf
Sleep 5000
If DoesRegKeyExist ("%RegUninstallKey%") == "1" Then "Set:neoUninstallError" EndIf
Call %InstPara%
If "%ErrorLevel%" == "3010" Then "neoRebootRequired" EndIf
Sleep 5000
If DoesRegKeyExist ("%RegUninstallKey%") == "0" Then "Set:neoInstallError" EndIf
[neoInstall]
AddMeter -1
Call %InstPara%
If "%ErrorLevel%" == "3010" Then "neoRebootRequired" EndIf
Sleep 5000
If DoesRegKeyExist ("%RegUninstallKey%") == "0" Then "Set:neoInstallError" EndIf
[Set:neoUninstall]
If DoesRegKeyExist ("%RegUninstallKey%") == "1" Then "Set:neoUninstallError" EndIf
-Sleep 5000
If "%ErrorLevel%" == "3010" Then "neoRebootRequired" EndIf
-Call %UninstPara%
-AddMeter -1
[neoRebootRequired]
SetReboot 1
-SetReboot 1
[Set:neoInstallError]
Set ErrorOutput=%ErrorLogMessage% ErrorLevel: %ErrorLevel%
ErrorLogMsg %ErrorOutput%
Abort %ErrorOutput%
[Set:neoUninstallError]
Set ErrorOutput=%ErrorLogMessage% ErrorLevel: %ErrorLevel%
ErrorLogMsg %ErrorOutput%
Abort %ErrorOutput%
-Abort %ErrorOutput%
-ErrorLogMsg %ErrorOutput%
-Set ErrorOutput=%ErrorLogMessage% ErrorLevel: %ErrorLevel%
;~~~~~~~~~~~~~~~~~ Diff - Tuning ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Product]
#Set:Product
#Reg:Product
#Ini:Product
#Security:Product
#Shell:Product
[Set:Product]
Set DESKTOPSHORTCUT=%%%SRC%\%Setupinfdir%\Setup.cfg,Options,DESKTOPSHORTCUT%%
ReplaceEnv DESKTOPSHORTCUT
If "%DESKTOPSHORTCUT%" != "1" Then "Set:Desktopshortcut0" Else "Set:Desktopshortcut1" EndIf
-Del "%CommonDesktop%\SAP Logon.lnk"
[Set:Desktopshortcut0]
Del "%CommonDesktop%\SAP Logon.lnk"
[Set:Desktopshortcut1]
Copy "%CommonPrograms%\SAP Front End\SAP Logon.lnk" "%CommonDesktop%\SAP Logon.lnk"
[Reg:Product]
HKLM,"Software\Microsoft\Windows\CurrentVersion\Uninstall\%Uninstallkey%","SystemComponent",0x00010001,1
[Ini:Product]
[Security:Product]
[Shell:Product]
Last edited by Ahmed on 14. Dec 2018, 13:27, edited 2 times in total.
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Packaging SAP GUI 7.50
What does not work?
Any error messages?
Instead of using the neo42 template you can try the Matrix42 package wizard with the unattended option.
Any error messages?
Instead of using the neo42 template you can try the Matrix42 package wizard with the unattended option.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Packaging SAP GUI 7.50
Show me this Error Msg.
[Imgur]https://i.imgur.com/6UaczWv.png[/img]
The installation / deinstallation was aborted with an error message! ErrorLevel: 70
[Imgur]https://i.imgur.com/6UaczWv.png[/img]
The installation / deinstallation was aborted with an error message! ErrorLevel: 70
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Packaging SAP GUI 7.50
I have no idea what your screenshot shows.
Actually I was asking for a setup error log message...
What happens if you run the sapsetup-call from a batchfile/commandline?
Actually I was asking for a setup error log message...
What happens if you run the sapsetup-call from a batchfile/commandline?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Packaging SAP GUI 7.50
This is setup error log message
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Packaging SAP GUI 7.50
OK. Error 70 is "permission denied".
Did you run the command prompt with "run as administrator"?
Did you run the command prompt with "run as administrator"?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Packaging SAP GUI 7.50
Yes i did. i have tested other Pakaging Software and working without problem but with SAP dosen't work.
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Packaging SAP GUI 7.50
Do you get another error message if you remove /silent or /nodlg?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Packaging SAP GUI 7.50
i removed /nodlg now its work. but i have to do manuel installation.
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Packaging SAP GUI 7.50
What about /silent?
Are you sure the SAPALL configuration exists? Did you double check in the SAPADMIN tool?
Are you sure the SAPALL configuration exists? Did you double check in the SAPADMIN tool?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Packaging SAP GUI 7.50
i Added /silent and show the same Error massage
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Packaging SAP GUI 7.50
OK - so the unattended setup does not work in general.
Maybe you should contact the SAP support and start creating the Empirum package after fixing the SAP unattended setup.
Maybe you should contact the SAP support and start creating the Empirum package after fixing the SAP unattended setup.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Packaging SAP GUI 7.50
I thik i should do that.Thank you for your time
Who is online
Users browsing this forum: No registered users and 0 guests