Hallo zusammen,
ich lasse mit in de Setup.inf eine Deskverknüpfung anlegen:
[Shell:Product]
%Desktop%\DMS\DMS_nn_DMSDATA, M:\DMS\Dms2\Bin\DMS2C.exe -dir M:\dms\dms2 %VM_DMSLANG% -u username
Nun mächte ich aber diers Verknüpfung gerne mitgeben das Sie in einem bestimmten Ordner ausgeführt wird, z.B. M:\DMS\ .
Hat jemand eine Idee wie ich das machen könnte ?
Desktop Link in einem anderen Verzeichnis ausgeführt
-
- Posts: 313
- Joined: 12. May 2005, 07:47
- Location: Andernach
- Contact:
Desktop Link in einem anderen Verzeichnis ausgeführt
Viele Grüße,
Oliver Becker
:-) Don't worry, be happy !
Oliver Becker
:-) Don't worry, be happy !
Hallo Herr Becker,
das sollte so aussehen:
%Desktop%\DMS\DMS_nn_DMSDATA,M:\DMS\Dms2\Bin\DMS2C.exe -dir M:\dms\dms2 %VM_DMSLANG% -u username,M:\DMS\
Ist aber in der Hilfedatei Empirum\Configurator\Admin\SetupDEU.chm auch so beschreiben.
das sollte so aussehen:
%Desktop%\DMS\DMS_nn_DMSDATA,M:\DMS\Dms2\Bin\DMS2C.exe -dir M:\dms\dms2 %VM_DMSLANG% -u username,M:\DMS\
Ist aber in der Hilfedatei Empirum\Configurator\Admin\SetupDEU.chm auch so beschreiben.
Erik Peters
Package Cloud Engineer
matrix42 AG
erik.peters@matrix42.com
http://www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG or of the package cloud team.
Package Cloud Engineer
matrix42 AG
erik.peters@matrix42.com
http://www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG or of the package cloud team.
-
- Posts: 313
- Joined: 12. May 2005, 07:47
- Location: Andernach
- Contact:
-
- Posts: 313
- Joined: 12. May 2005, 07:47
- Location: Andernach
- Contact:
Das hat geklappt, leider gibt es nun ein anderes kleines Problem.
Hier mein Aufruf:
[Shell:Product]
%Desktop%\DMS\DMS PDF Search, M:\DMS\Dms2\Bin\DMS2C.exe, -dir M:\dms\dms2 -u %VM_DMSLOC% -c M:\DMS\DMS2\CONFIG\DMS2C_RE.CFG %VM_DMSLANG%,C:\TEMP\
%Desktop%\DMS\DMS nn DMSDATA, M:\DMS\Dms2\Bin\DMS2C.exe -dir M:\dms\dms2 %VM_DMSLANG% -u username,C:\TEMP\
%Desktop%\DMS\DMS_Manual_EN.pdf, M:\DMS\Dms2\Doc\DMS_Manual_EN.pdf
%Desktop%\DMS\DMS_Manual_DE.pdf, M:\DMS\Dms2\Doc\DMS_Manual_DE.pdf
Verknüpfungen 1, 3, 4 werden richtig angelegt,
Verknüpfung 2 wird als "M:\DMS\Dms2\Bin\DMS2C.exe -dir M:\dms\dms2 %VM_DMSLANG% -u username,C:\TEMP\" angelegt.
Woher kommen die Anführungszeichen und wie bekomme ich Die weg ?
Hier mein Aufruf:
[Shell:Product]
%Desktop%\DMS\DMS PDF Search, M:\DMS\Dms2\Bin\DMS2C.exe, -dir M:\dms\dms2 -u %VM_DMSLOC% -c M:\DMS\DMS2\CONFIG\DMS2C_RE.CFG %VM_DMSLANG%,C:\TEMP\
%Desktop%\DMS\DMS nn DMSDATA, M:\DMS\Dms2\Bin\DMS2C.exe -dir M:\dms\dms2 %VM_DMSLANG% -u username,C:\TEMP\
%Desktop%\DMS\DMS_Manual_EN.pdf, M:\DMS\Dms2\Doc\DMS_Manual_EN.pdf
%Desktop%\DMS\DMS_Manual_DE.pdf, M:\DMS\Dms2\Doc\DMS_Manual_DE.pdf
Verknüpfungen 1, 3, 4 werden richtig angelegt,
Verknüpfung 2 wird als "M:\DMS\Dms2\Bin\DMS2C.exe -dir M:\dms\dms2 %VM_DMSLANG% -u username,C:\TEMP\" angelegt.
Woher kommen die Anführungszeichen und wie bekomme ich Die weg ?
Viele Grüße,
Oliver Becker
:-) Don't worry, be happy !
Oliver Becker
:-) Don't worry, be happy !
-
- Posts: 2
- Joined: 16. Dec 2004, 11:40
- Location: Lorsch
- Contact:
%Desktop%\DMS\DMS nn DMSDATA, M:\DMS\Dms2\Bin\DMS2C.exe, -dir M:\dms\dms2 %VM_DMSLANG% -u username,C:\TEMP\
%Desktop%\DMS\DMS_Manual_EN.pdf, M:\DMS\Dms2\Doc\DMS_Manual_EN.pdf
%Desktop%\DMS\DMS_Manual_DE.pdf, M:\DMS\Dms2\Doc\DMS_Manual_DE.pdf
Da hat einfach nur das Komma gefehlt
%Desktop%\DMS\DMS_Manual_EN.pdf, M:\DMS\Dms2\Doc\DMS_Manual_EN.pdf
%Desktop%\DMS\DMS_Manual_DE.pdf, M:\DMS\Dms2\Doc\DMS_Manual_DE.pdf
Da hat einfach nur das Komma gefehlt
42 Grüße
Michael Huß
matrix42
Michael Huß
matrix42
-
- Posts: 313
- Joined: 12. May 2005, 07:47
- Location: Andernach
- Contact:
Who is online
Users browsing this forum: No registered users and 9 guests