Installation Advanced Agent per Anmeldescript
Moderator: MVogt
-
Hendrik_Ambrosius
- Moderator

- Posts: 8099
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Ach - jetzt fällt es mir erst auf beim zweiten Ansehen der Screenshots - natürlich müssen die Dateien vorher in eine selbstextrahierende Datei gepackt werden. Und dann wird diese Gepackte EXE über den Bulli Creator mit einem Account versehen!
Also erst mal sicherstellen dass diese große EXE ohne Fehler mit Admin-Rechten die Installation ausführt und DANN durch den Bulli Creator jagen.
Also erst mal sicherstellen dass diese große EXE ohne Fehler mit Admin-Rechten die Installation ausführt und DANN durch den Bulli Creator jagen.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
Hendrik_Ambrosius
- Moderator

- Posts: 8099
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Ja, genau.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
ich habe noch ein Problem mit dem erstellen des Selbstextrahierenden Paketes.
Er erstellt die *.cab Datei sobald diese ca. 83 MB hat, wechselt er in den Packager, aber die *.cab Datei im Agent Verzeichnis ist verschwunden bzw. gelöscht.
Mit einem anderen Paket hat es funktioniert. Allerdings jedes mal beim Agent Paket passiert dies und bringt dann natürlich beim erstellen der *.exe Datei eine Fehlermeldung das die Quell *.cab nicht vorhanden ist.
Er erstellt die *.cab Datei sobald diese ca. 83 MB hat, wechselt er in den Packager, aber die *.cab Datei im Agent Verzeichnis ist verschwunden bzw. gelöscht.
Mit einem anderen Paket hat es funktioniert. Allerdings jedes mal beim Agent Paket passiert dies und bringt dann natürlich beim erstellen der *.exe Datei eine Fehlermeldung das die Quell *.cab nicht vorhanden ist.
-
Hendrik_Ambrosius
- Moderator

- Posts: 8099
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Dann nehmen Sie doch stattdessen WinZip, 7zip o.ä.
Hauptsache es kommt ne EXE bei raus die automatisch abläuft.
Hauptsache es kommt ne EXE bei raus die automatisch abläuft.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
Hendrik_Ambrosius
- Moderator

- Posts: 8099
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Wird sicherlich in der Dokumentation von WinZip etwas zu drinstehen.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
Hendrik_Ambrosius
- Moderator

- Posts: 8099
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Ach so - es muss der gesamte Inhalt des Advanced Agent Pakets rein und als Aufruf schlage ich vor: "setup.exe /S2"
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Erstmal Dankeschön. Soweit hat das funktioniert mit dem Erstellen mit WinRAR. Er installiert den Agent und die Komponenten. Ich sehe auch unter dem System32 Ordner den Ordner Empirum mit den Daten drin.
Allerdings ist der Dienst nicht installiert und der Agent wird nicht ausgeführt. Haben Sie dazu irgendeine Idee?
Allerdings ist der Dienst nicht installiert und der Agent wird nicht ausgeführt. Haben Sie dazu irgendeine Idee?
-
Hendrik_Ambrosius
- Moderator

- Posts: 8099
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Wenn man auf dem selben Rechner die setup.exe manuell unkomprimiert mit Admin-Rechten startet geht alles korrekt?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Habe schon wieder das selbe problem....Hendrik_Ambrosius wrote:Im schlimmsten Fall dann als zweites Kommando nach dem Aufruf die Datei AgentConfig.xml nach c:\\windows\\system32\\empirum kopieren.
Sollte aber eigentlich automatisch erfolgen wenn die default-Datei im Template_SFX Verzeichnis liegt...
Gibts doch garnicht!
Wie muss das ding denn jetzt genau heißen?
Im Empirum v12 Advanced Agent Best Practices_DEU.pdf heißt es "defaultAgentConfig.xml", im Readme unter \\%EmpirumServer%\Configurator$\Packages\matrix42\EmpirumAgent\12.0\Template_SFX heißt es "defaultAgentTemplate.xml"?
-
Hendrik_Ambrosius
- Moderator

- Posts: 8099
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Der Auszug aus der setup.inf des Advanced Agents beantwortet das:
Code: Select all
[CopyDefaultXMLfromUserDir]
1:..\..\..\..\User\defaultAgentConfig.xml, %System%\Empirum\AgentConfig.xml , ALWAYS, 0
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Genau das habe ich aber in Template_SFX aber auch...Hendrik_Ambrosius wrote:Der Auszug aus der setup.inf des Advanced Agents beantwortet das:
Code: Select all
[CopyDefaultXMLfromUserDir] 1:..\..\..\..\User\defaultAgentConfig.xml, %System%\Empirum\AgentConfig.xml , ALWAYS, 0
Woran könnte es liegen das es nicht gefunden wird?
Habe ein selbsextrahierendes paket in Empirum erzeugt...
-
Hendrik_Ambrosius
- Moderator

- Posts: 8099
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Ach so - dafür ist diese Sektion da:
Liegt Ihre Datei im Ordner Template_SFX?
Code: Select all
[SFXCopyDefaultXML]
If DoesFileExist ("%Src%\Template_SFX\defaultAgentConfig.xml") == "0" Then "StopInstallation" Endif
1:Template_SFX\defaultAgentConfig.xml, %System%\Empirum\AgentConfig.xml , ALWAYS, 0
Liegt Ihre Datei im Ordner Template_SFX?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Who is online
Users browsing this forum: No registered users and 0 guests