dass bei einer Installation eines Clients durch den Depotserver eine falsche IP Adresse
beim mounten im EPE verwendet wird.
Die falsche IP Adresse ist die 172.16.126.74. Der Depotserver wurde zur Installation in einem anderen VLAN angeschlossen und hat eine IP Adresse vom DHCP erhalten. Die IP Adresse wurde dann im nachhinein geändert und alle Dienste wurden von dem Empirum Master Server neu zugewiesen und installiert.
Der von uns eingesetzt Windows DNS-Server weißt keine Probleme auf,
hier stimmt die IP-Adresse mit dem Hostnamen überein.
(Hardware Info: Als Client wird ein Dell Optiplex 760 und als Depotserver ein Dell Optiplex 790 eingesetzt)
Hier die gesamte Ausgabe auf dem Bildschirm in der EPE:
Code: Select all
[logon] Connection to the Empirum-Server could not be established
[logon] mount error 115 = Operation now in progress Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
[logon] Error during mounting //172.16.126.74/EMPINST$ on /mounts/PXESRV_EmpInst
[logon] Mounting //172.16.126.74/EMPINST$ on /mounts/PXESRV_EmpInst
[logon] mount error 115 = Operation now in progress Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
[logon] Error during mounting //172.16.126.74/CONFIGURATOR$ on /mounts/Configurator
[logon] ServerIP got via GetHostByName is 172.16.126.74
[logon] mount error 115 = Operation now in progress Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
[logon] Error during mounting //ES-SD-OP-209.wenglor.com/CONFIGURATOR$ on /mounts/Configurator
[logon] Mounting //ES-SD-OP-209.wenglor.com/CONFIGURATOR$ on /mounts/Configurator
[logon] mount error 115 = Operation now in progress Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
[logon] Error during mounting //172.16.126.74/EMPINST$ on /mounts/EmpInst
[logon] ServerIP got via GetHostByName is 172.16.126.74
[logon] mount error 115 = Operation now in progress Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
[logon] Error during mounting //ES-SD-OP-209.wenglor.com/EMPINST$ on /mounts/EmpInst
[logon] Mounting //ES-SD-OP-209.wenglor.com/EMPINST$ on /mounts/EmpInst
[logon] mounting EMPINST$ and CONFIGURATOR$
[sshd] starting ssh server
[logon] entering runlevel
[sshd] generating ssh host keys finished
[buildpxecmd] The following options are passed to msgpxe: -m:0023AE6C592B -h:[color=#FF0000][b]172.16.126.74[/b][/color]
[sshd] generating ssh host keys
[sshd] entering runlevel
[networking] Setting ServerIP in /etc/hosts
[networking] You can connect to observe the Client's state by browsing to http://172.17.50.58
[networking] using it's HW-Address as 0023AE6C592B
[networking] primary interface is up and running
[networking] eth0 is selected as primary interface
[networking] [b]Ping to ES-SD-OP-209 was successfully[/b]
[networking] Configuration file could not be downloaded. May be it does not exist on Empirumserver
[networking] Downloading configuration file from tftp
[networking] [b]Retrieved nextServer is 172.17.50.15[/b]
[networking] Getting nextserver via dhclient ...
[networking] Starting the process to check the nextserver and to get the configfile from tftp
[networking] Check nextserver and download configfile
[networking] [b]client IP is 172.17.50.58[/b]
[networking] waiting for the interface to be configured
[networking] Linked interfaces: eth0
[networking] Carrier for eth0: Detected
[networking] eth0 is up
[networking] Checking for network device activations
[networking] Module: e1000e already loaded => skipping it!
[networking] Loading alternative module(s) for NICs into running kernel
[networking] entering runlevel
[epelog] Empty mount point. Logs are saved local as /tmp/
[mountusb] Could not mount any USB devices
[epelog] EPE will automatically continue with the detection in 10 seconds
[epelog] Optionally insert a USB device now. SPY and log will be copied
[modsetup] Storage Adapter: 0x00008086-0x00003a02-0xffffffff-0xffffffff
[modsetup] Network Adapter: 0x00008086-0x000010de-0xffffffff-0xffffffff
[modsetup] installing Driver dm-crypt
[modsetup] installing Driver dm-log
[modsetup] installing Driver dm-mirror
[modsetup] installing Driver dm-mod
[modsetup] installing Driver dm-multipath
[modsetup] installing Driver dm-region-hash
[modsetup] installing Driver dm-round-robin
[modsetup] installing Driver dm-snapshot
[modsetup] installing Driver dm-zero
[modsetup] installing Driver linear
[modsetup] installing Driver md-mod
[modsetup] installing Driver multipath
[modsetup] installing Driver raid0
[modsetup] installing Driver raid1
[modsetup] installing Driver raid10
[modsetup] installing Driver raid456
[modsetup] loading raid and lvm
[modsetup] installing Driver kafs
[modsetup] installing Driver cifs
[modsetup] installing Driver coda
[modsetup] installing Driver exportfs
[modsetup] installing Driver msdos
[modsetup] installing Driver isofs
[modsetup] installing Driver jfs
[modsetup] installing Driver minix
[modsetup] installing Driver ncpfs
[modsetup] installing Driver ntfs
[modsetup] installing Driver reiserfs
[modsetup] installing Driver udf
[modsetup] installing Driver xfs
[modsetup] loading fs-support
[modsetup] loading inserting ide disk-driver
[modsetup] loading inserting scsi disk-driver
[modsetup] loading scsi low-level-drivers
[modsetup] installing SCSI-drivers
[modsetup] installing NIC-drivers
[modsetup] installing Installing IDE-drivers
[modsetup] installing Driver ff-memless
[modsetup] installing Driver input-polldev
[modsetup] installing Driver newtonkbd
[modsetup] installing Driver sunkbd
[modsetup] installing Driver xtkbd
[modsetup] installing Driver pcspkr
[modsetup] installing Driver sermouse
[modsetup] loading input device driver
[modsetup] loading edd support
[modsetup] removing usb_storage
[modsetup] preparing modules directory
[modsetup] entering runlevel
[startx] browser executed successfully
[startx] Starting Browser
[startx] setting DISPLAY-variable
[httpd] httpd starting httpd
[httpd] setting environment-variable $DESKTOP_DEST
[httpd] htpassword successfully configured
[httpd] Configuring .htaccess
[startx] starting Tiny-X for framebuffer devices Xfbdev
[startx] entering runlevel
[lo] Loopback interface succsessfully set up
[lo] setting up loopback interface
[lo] entering runlevel
[boot] loading usb modules
[boot] updating modules.conf
[boot] preparing modules
[boot] CPU has 64Bit capability
[boot] checking if CPU has 64Bit capability
[boot] setting hostname
[boot] setting up modul-dependentcies
[syslog] starting syslogd
[syslog] starting klogd
[boot] network mode: dhcp
[boot] choosing network mode
[boot] making udev managing hotplug events
[boot] performing udev initial scan
[boot] mounting /sys
[boot] mounting /proc
[boot] msg_enter
[uncrypt] decryption completed successfully
[uncrypt] decrypting ...
[uncrypt] reading disk.iniVielleicht weiß jemand von Euch wo das Problem liegen könnte.
Evtl. ist die IP Adresse noch in irgendeiner Datei vorliegend?
