Windows 7x64 installation in einer Schleife (PXE Error 110)

[John Carmack]

Hallo Leute,

Erst einmal ein Dank an das ganze Forum, ihr habt mir bisher sehr gut weitergeholfen.

Ich habe mir per WAIK eine neues Windows 7x64 installations Medium gebastelt. Habe recht viele Updates und Treiber integriert.
Das Image ist nun 4,5GB groß und ist nun auch im Empirum 14.1 importiert.
(ein anderes von mir ertelletes Medium (4GB groß) funktioniert. Dort sind allerding weit aus weniger Treiber und Updates integriert)
Service Partition ist 15GB groß

Nachdem ich nun einen Client aktiviert habe startet das "Empirum Perinstallation Environment".
Soweit - So gut...

Detekting Hardware: OK
Loading Drivers: OK
Connecting to Server: OK
Crating Partition: OK

Copying Source: NICHT OK
PXE LOG(100): [Eis32] Error No: 110 Copy of Operating System files failed!

Nach einer weile des kopierens startet die Maschine neu und alles beginnt von vorne.

Warum?

Kann mir bitte jemand helfen?

[JeeCay]

Moin,

Ich habe das gleiche versucht. Windows 7 , Patche und Software installiert, neues Image erstellt und in Empirum eingebunden. Gleiches Ergebnis wie bei dir.
Interessanterweise hat das ganze einwandfrei geklappt, als ich NUR Patche installiert und dann das Image erstellt habe.
Möglicherweise ist für Empirum das Image zu groß geworden?

Gruß, JeeCay

[John Carmack]

Gibt es denn eine Beschränkung der Image-Größe?

meine LOG Dateien:

PXE LOG:

Code: Select all

DE-7x64-L310156	16.12.2011 10:06:57	 [Eis32] Performing reboot.
DE-7x64-L310156	16.12.2011 10:06:57	 [Eis32] Error No: 110 Copy of Operating System files failed!
DE-7x64-L310156	16.12.2011 09:59:19	 [Eis32] Transferring WinPE 2.x files [about 8 minutes...]
DE-7x64-L310156	16.12.2011 09:35:33	 [Eis32] Transferring OS installation source files [about 15 minutes...]
DE-7x64-L310156	16.12.2011 09:35:33	 [Eis32] Transferring OS sources from: SRVAPPS02 win7/x64/PRO/1/US
DE-7x64-L310156	16.12.2011 09:35:33	 [Eis32] Copying installation files.
DE-7x64-L310156	16.12.2011 09:35:33	 [Eis32] Total elapsed time: 0 min
DE-7x64-L310156	16.12.2011 09:35:32	 [Eis32] Using service partition: 3 on disk: 0 drive letter: S
DE-7x64-L310156	16.12.2011 09:35:32	 [Eis32] Using data partition: 2 on disk: 0 drive letter: D
DE-7x64-L310156	16.12.2011 09:35:32	 [Eis32] Using system partition: 1 on disk: 0 drive letter: C
DE-7x64-L310156	16.12.2011 09:35:31	 [Eis32] Assigning drive letters...
DE-7x64-L310156	16.12.2011 09:35:31	 [Eis32] Disk/MB: 0/305245 parttypes/MB: 7/102600 7/187646 12/14998 0/0 free/used: 0/305244
DE-7x64-L310156	16.12.2011 09:35:31	 [Eis32] Hard disk formating/partitioning successful.
DE-7x64-L310156	16.12.2011 09:35:31	 [Eis32] Created partition: 2 on disk: 0 with size: 187646
DE-7x64-L310156	16.12.2011 09:35:30	 [Eis32] Creating partition: 2 on disk: 0 with size: 0
DE-7x64-L310156	16.12.2011 09:35:30	 [Eis32] Created partition: 3 on disk: 0 with size: 14998
DE-7x64-L310156	16.12.2011 09:35:29	 [Eis32] Creating partition: 3 on disk: 0 with size: 15000
DE-7x64-L310156	16.12.2011 09:35:27	 [Eis32] Created partition: 1 on disk: 0 with size: 102600
DE-7x64-L310156	16.12.2011 09:35:26	 [Eis32] Creating partition: 1 on disk: 0 with size: 102600
DE-7x64-L310156	16.12.2011 09:35:26	 [Eis32] Creating all partitions...
DE-7x64-L310156	16.12.2011 09:35:26	 [Eis32] Check partition allocation plan...
DE-7x64-L310156	16.12.2011 09:35:26	 [Eis32] Disk/MB: 0/305245 parttypes/MB: 0/0 0/0 0/0 0/0 free/used: 305245/0
DE-7x64-L310156	16.12.2011 09:35:26	 [Eis32] Deleting partitions...
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] Disk/MB: 0/305245 parttypes/MB: 7/102600 7/187646 12/14998 0/0 free/used: 0/305244
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] Preparing hard disks.
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] Target device for OS-Installation: /dev/sda
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] TCP/IP address: DHCP
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] Domain/Workgroup: Dom: LHSFRA
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] Computer name: DE-7x64-L310156
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] Image name: win7 x64 PRO US SP1 
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] Total elapsed time: 0 min
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] Connected Empirumserver: SRVAPPS02 IP: 193.101.144.236
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] Current client mac address: B09928C9E1B9 IP: 10.10.22.12
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] Empirum OS-Installation script Ver. 01.53
DE-7x64-L310156	16.12.2011 09:35:25	 [Eis32] Empirum Eis32 Ver. 14.1.0.41
DE-7x64-L310156	16.12.2011 09:35:24	 [TimeOutThread] 16.11.2011 09:35.23 - Eis32 Time Out Thread: Start!
DE-7x64-L310156	16.12.2011 09:35:24	 [seldest] entering runlevel
DE-7x64-L310156	16.12.2011 09:35:23	 [getimage] entering runlevel
DE-7x64-L310156	16.12.2011 09:35:22	 [getconfig] entering runlevel
DE-7x64-L310156	16.12.2011 09:35:22	 [raidsetup] entering runlevel
DE-7x64-L310156	16.12.2011 09:35:22	 [TimeOutThread] 16.11.2011 09:35.21 - Eis32 Time Out Thread: End!
DE-7x64-L310156	16.12.2011 09:35:20	 [TimeOutThread] 16.11.2011 09:35.19 - Eis32 Time Out Thread: Start!
DE-7x64-L310156	16.12.2011 09:35:19	 [sshd ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [networking ] Setting ServerIP in /etc/hosts 
DE-7x64-L310156	16.12.2011 09:35:19	 [networking ] Using DNS from bootimage configuration 
DE-7x64-L310156	16.12.2011 09:35:19	 [networking ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [epelog ] Logging on USB device successfully 
DE-7x64-L310156	16.12.2011 09:35:19	 [epelog ] EPE will automatically continue with the detection in 10 seconds 
DE-7x64-L310156	16.12.2011 09:35:19	 [epelog ] Optionally insert a USB device now. SPY and log will be copied 
DE-7x64-L310156	16.12.2011 09:35:19	 [modsetup ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [startx ] browser executed successfully 
DE-7x64-L310156	16.12.2011 09:35:19	 [logon] entering runlevel
DE-7x64-L310156	16.12.2011 09:35:19	 [startx ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [httpd ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [lo ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [syslog ] starting syslogd 
DE-7x64-L310156	16.12.2011 09:35:19	 [syslog ] starting klogd 
DE-7x64-L310156	16.12.2011 09:35:19	 [boot ] msg_enter 
DE-7x64-L310156	16.12.2011 09:35:19	 [sshd ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [uncrypt ] decryption completed successfully 
DE-7x64-L310156	16.12.2011 09:35:19	 [networking ] Setting ServerIP in /etc/hosts 
DE-7x64-L310156	16.12.2011 09:35:19	 [uncrypt ] decrypting ... 
DE-7x64-L310156	16.12.2011 09:35:19	 [networking ] Using DNS from bootimage configuration 
DE-7x64-L310156	16.12.2011 09:35:19	 [uncrypt ] reading disk.ini 
DE-7x64-L310156	16.12.2011 09:35:19	 [networking ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [epelog ] Logging on USB device successfully 
DE-7x64-L310156	16.12.2011 09:35:19	 [epelog ] EPE will automatically continue with the detection in 10 seconds 
DE-7x64-L310156	16.12.2011 09:35:19	 [epelog ] Optionally insert a USB device now. SPY and log will be copied 
DE-7x64-L310156	16.12.2011 09:35:19	 [modsetup ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [startx ] browser executed successfully 
DE-7x64-L310156	16.12.2011 09:35:19	 [startx ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [httpd ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [lo ] entering runlevel 
DE-7x64-L310156	16.12.2011 09:35:19	 [syslog ] starting syslogd 
DE-7x64-L310156	16.12.2011 09:35:19	 [syslog ] starting klogd 
DE-7x64-L310156	16.12.2011 09:35:19	 [boot ] msg_enter 
DE-7x64-L310156	16.12.2011 09:35:19	 [uncrypt ] decryption completed successfully 
DE-7x64-L310156	16.12.2011 09:35:19	 [uncrypt ] decrypting ... 
DE-7x64-L310156	16.12.2011 09:35:19	 [uncrypt ] reading disk.ini 
DE-7x64-L310156	16.12.2011 09:31:00	 [Eis32] Transferring OS installation source files [about 15 minutes...]
DE-7x64-L310156	16.12.2011 09:31:00	 [Eis32] Transferring OS sources from: SRVAPPS02 win7/x64/PRO/1/US
DE-7x64-L310156	16.12.2011 09:31:00	 [Eis32] Copying installation files.
DE-7x64-L310156	16.12.2011 09:31:00	 [Eis32] Total elapsed time: 0 min
DE-7x64-L310156	16.12.2011 09:30:59	 [Eis32] Using service partition: 3 on disk: 0 drive letter: S
DE-7x64-L310156	16.12.2011 09:30:59	 [Eis32] Using data partition: 2 on disk: 0 drive letter: D
DE-7x64-L310156	16.12.2011 09:30:59	 [Eis32] Using system partition: 1 on disk: 0 drive letter: C
DE-7x64-L310156	16.12.2011 09:30:58	 [Eis32] Assigning drive letters...
DE-7x64-L310156	16.12.2011 09:30:58	 [Eis32] Disk/MB: 0/305245 parttypes/MB: 7/102600 7/187646 12/14998 0/0 free/used: 0/305244
DE-7x64-L310156	16.12.2011 09:30:58	 [Eis32] Hard disk formating/partitioning successful.
DE-7x64-L310156	16.12.2011 09:30:58	 [Eis32] Created partition: 2 on disk: 0 with size: 187646
DE-7x64-L310156	16.12.2011 09:30:57	 [Eis32] Creating partition: 2 on disk: 0 with size: 0
DE-7x64-L310156	16.12.2011 09:30:57	 [Eis32] Created partition: 3 on disk: 0 with size: 14998
DE-7x64-L310156	16.12.2011 09:30:56	 [Eis32] Creating partition: 3 on disk: 0 with size: 15000
DE-7x64-L310156	16.12.2011 09:30:54	 [Eis32] Created partition: 1 on disk: 0 with size: 102600
DE-7x64-L310156	16.12.2011 09:30:53	 [Eis32] Creating partition: 1 on disk: 0 with size: 102600
DE-7x64-L310156	16.12.2011 09:30:53	 [Eis32] Creating all partitions...
DE-7x64-L310156	16.12.2011 09:30:53	 [Eis32] Check partition allocation plan...
DE-7x64-L310156	16.12.2011 09:30:53	 [Eis32] Disk/MB: 0/305245 parttypes/MB: 0/0 0/0 0/0 0/0 free/used: 305245/0
DE-7x64-L310156	16.12.2011 09:30:53	 [Eis32] Deleting partitions...
DE-7x64-L310156	16.12.2011 09:30:52	 [Eis32] Disk/MB: 0/305245 parttypes/MB: 7/102600 7/187646 12/14998 0/0 free/used: 0/305244

EPE LOG:

Code: Select all

Begin time for EPE logging: Fri Dec 16 08:33:57 GMT 2011


Outputs of 'dmesg'
------------------------- DMESG --------------------

PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff 
reserve RAM buffer: 00000000ca98f000 - 00000000cbffffff 
reserve RAM buffer: 00000000cb000000 - 00000000cbffffff 
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:01: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:02: [io  0x0400-0x047f] has been reserved
system 00:02: [io  0x0480-0x048f] has been reserved
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0500-0x057f] has been reserved
system 00:02: [io  0x1640-0x164f] has been reserved
system 00:02: [io  0xf800-0xf87f] has been reserved
system 00:02: [io  0xf880-0xf8ff] has been reserved
system 00:02: [io  0xfc00-0xfc7f] has been reserved
system 00:02: [io  0xfc80-0xfcff] has been reserved
system 00:02: [io  0xfd00-0xfd7f] has been reserved
system 00:02: [io  0x1000-0x1003] has been reserved
system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
pci 0000:00:1c.0: BAR 9: assigned [mem 0xcfa00000-0xcfbfffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-09]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xe0700000-0xe26fffff]
pci 0000:00:1c.0:   bridge window [mem 0xcfa00000-0xcfbfffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.2:   bridge window [io  disabled]
pci 0000:00:1c.2:   bridge window [mem 0xe0600000-0xe06fffff]
pci 0000:00:1c.2:   bridge window [mem pref disabled]
pci 0000:00:1c.3: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.3:   bridge window [io  disabled]
pci 0000:00:1c.3:   bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:00:1c.3:   bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.7:   bridge window [io  disabled]
pci 0000:00:1c.7:   bridge window [mem 0xe0400000-0xe04fffff]
pci 0000:00:1c.7:   bridge window [mem pref disabled]
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
pci 0000:00:1c.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
pci 0000:00:1c.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
pci 0000:00:1c.2: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:1c.3: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
pci 0000:00:1c.7: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci 0000:00:1c.7: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xe0700000-0xe26fffff]
pci_bus 0000:01: resource 2 [mem 0xcfa00000-0xcfbfffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xe0600000-0xe06fffff]
pci_bus 0000:0b: resource 1 [mem 0xe0500000-0xe05fffff]
pci_bus 0000:0c: resource 1 [mem 0xe0400000-0xe04fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 24568k freed
Scanning for low memory corruption every 60 seconds
highmem bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.15)
msgmni has been set to 1708
io scheduler noop registered (default)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
vesafb: framebuffer at 0xd0000000, mapped to 0xf8100000, using 3072k, total 65472k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:16.3: PCI INT C -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
0000:00:16.3: ttyS1 at I/O 0x30b0 (irq = 11) is a 16550A
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb42000/0xa0000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
RAMDISK: gzip image found at block 0
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing unused kernel memory: 284k freed
input: PS/2 Generic Mouse as /class/input/input2
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
ehci_hcd 0000:00:1a.0: PCI INT A -> Link[LNKH] -> GSI 7 (level, low) -> IRQ 7
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 7, io mem 0xe272a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ehci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 10, io mem 0xe2729000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
sl811: driver sl811-hcd, 19 May 2005
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver libusual
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high speed USB device using ehci_hcd and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.6: new high speed USB device using ehci_hcd and address 3
usb 2-1.1: new full speed USB device using ehci_hcd and address 3
usb 2-1.3: new full speed USB device using ehci_hcd and address 4
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 4 ports detected
usb 2-1.4: new full speed USB device using ehci_hcd and address 5
usb 2-1.6: new high speed USB device using ehci_hcd and address 6
usb 2-1.3.2: new full speed USB device using ehci_hcd and address 7
usbcore: deregistering interface driver usb-storage
usbcore: deregistering interface driver libusual
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
input: PC Speaker as /class/input/input3
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: (unregistered net_device): Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) b0:99:28:c9:e1:b9
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: ffffff-0ff
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ahci 0000:00:1f.2: PCI INT B -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
ahci 0000:00:1f.2: setting latency timer to 64
irq 10: nobody cared (try booting with the "irqpoll" option)
Pid: 3965, comm: modprobe Not tainted 2.6.36-gentoo #240
Call Trace:
 [<c1043205>] __report_bad_irq+0x2e/0x71
 [<c1043304>] note_interrupt+0x9d/0xde
 [<c10439fd>] handle_level_irq+0x96/0xe3
 [<c1003cb2>] handle_irq+0x1a/0x24
 [<c1003c23>] do_IRQ+0x31/0x73
 [<c1002be9>] common_interrupt+0x29/0x30
 [<c104007b>] ? add_kallsyms+0xc/0x19d
 [<c10222ef>] ? __do_softirq+0x36/0xd0
 [<c10223ae>] do_softirq+0x25/0x2a
 [<c1022419>] irq_exit+0x2c/0x38
 [<c1003c50>] do_IRQ+0x5e/0x73
 [<c1002be9>] common_interrupt+0x29/0x30
 [<c1179885>] ? dma_alloc_from_coherent+0x92/0x99
 [<c1179359>] dmam_alloc_coherent+0x52/0xed
 [<c1178ab5>] ? devm_kzalloc+0x5a/0x62
 [<f857d33f>] ahci_port_start+0xee/0x163 [libahci]
 [<f860ff6a>] ata_host_start+0xc8/0x13f [libata]
 [<f857cd4e>] ? ahci_interrupt+0x0/0xba [libahci]
 [<f861022a>] ata_host_activate+0x13/0xaa [libata]
 [<f8653c11>] ahci_init_one+0x3f0/0x3fb [ahci]
 [<c10addad>] ? sysfs_addrm_finish+0x11/0x53
 [<c11158cc>] local_pci_probe+0xe/0x10
 [<c11158e5>] pci_call_probe+0x17/0x19
 [<c1115918>] __pci_device_probe+0x31/0x43
 [<c1115948>] pci_device_probe+0x1e/0x31
 [<c1176b60>] really_probe+0x6b/0xe9
 [<c1176c8a>] driver_probe_device+0x19/0x1f
 [<c1176d60>] __driver_attach+0x48/0x64
 [<c1175ecf>] bus_for_each_dev+0x38/0x5b
 [<c1176d90>] driver_attach+0x14/0x16
 [<c1176d18>] ? __driver_attach+0x0/0x64
 [<c117646e>] bus_add_driver+0x95/0x15a
 [<c1177168>] driver_register+0x73/0x97
 [<f865a000>] ? ahci_init+0x0/0x19 [ahci]
 [<c11159dd>] __pci_register_driver+0x31/0x69
 [<f865a000>] ? ahci_init+0x0/0x19 [ahci]
 [<f865a017>] ahci_init+0x17/0x19 [ahci]
 [<c1001083>] do_one_initcall+0x26/0xcd
 [<c1040c74>] sys_init_module+0x66/0x181
 [<c10026d0>] sysenter_do_call+0x12/0x26
handlers:
[<f80b634c>] (usb_hcd_irq+0x0/0x55 [usbcore])
Disabling IRQ #10
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xe2728000 port 0xe2728100 irq 10
ata2: DUMMY
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 10
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xe2728000 port 0xe2728300 irq 10
ata6: SATA max UDMA/133 abar m2048@0xe2728000 port 0xe2728380 irq 10
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC61J, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata3.00: ATAPI: Optiarc DVD RW AD-7710H, 1.50, max UDMA/100
ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.50 PQ: 0 ANSI: 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ide-gd driver 1.18
NTFS driver 2.1.29 [Flags: R/O MODULE].
SGI XFS with security attributes, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
Registering the dns_resolver key type
NET: Registered protocol family 33
kAFS: Red Hat AFS client v0.1 registering.
md: linear personality registered for level -1
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
md: raid10 personality registered for level 10
device-mapper: multipath: version 1.1.1 loaded
md: raid1 personality registered for level 1
md: raid0 personality registered for level 0
md: multipath personality registered for level -4
async_tx: api initialized (async)
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  : 11150.000 MB/sec
xor: using function: pIII_sse (11150.000 MB/sec)
raid6: int32x1   1143 MB/s
raid6: int32x2   1044 MB/s
raid6: int32x4    874 MB/s
raid6: int32x8    863 MB/s
raid6: mmxx1     4111 MB/s
raid6: mmxx2     4371 MB/s
raid6: sse1x1    3771 MB/s
raid6: sse1x2    4301 MB/s
raid6: sse2x1    7452 MB/s
raid6: sse2x2    8554 MB/s
raid6: using algorithm sse2x2 (8554 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: multipath round-robin: version 1.0.0 loaded
---------------------- END DMESG ---------------------

Outputs of 'lsmod'
------------------------- LSMOD --------------------

Module                  Size  Used by
dm_mirror              11186  0 
dm_zero                  811  0 
dm_round_robin          1722  0 
raid456                45092  0 
async_raid6_recov       3202  1 raid456
async_pq                2507  2 raid456,async_raid6_recov
raid6_pq               77558  2 async_raid6_recov,async_pq
async_xor               1867  3 raid456,async_raid6_recov,async_pq
xor                    13463  1 async_xor
async_memcpy             890  2 raid456,async_raid6_recov
async_tx                1362  5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
multipath               5022  0 
dm_crypt                9891  0 
dm_region_hash          5739  1 dm_mirror
dm_log                  7120  2 dm_mirror,dm_region_hash
raid0                   7621  0 
raid1                  17525  0 
dm_multipath           13000  1 dm_round_robin
raid10                 19035  0 
dm_snapshot            25835  0 
dm_mod                 51895  6 dm_mirror,dm_zero,dm_crypt,dm_log,dm_multipath,dm_snapshot
linear                  3363  0 
md_mod                 76842  6 raid456,multipath,raid0,raid1,raid10,linear
kafs                   75702  0 
af_rxrpc               66404  3 kafs
dns_resolver            3242  1 kafs
msdos                   5078  0 
jfs                   137359  0 
udf                    66423  0 
crc_itu_t               1021  1 udf
xfs                   375248  0 
cifs                  178621  0 
coda                   23587  0 
ntfs                   77464  0 
exportfs                2759  1 xfs
reiserfs              176259  0 
minix                  21391  0 
ncpfs                  39886  0 
smbfs                  48717  0 
isofs                  25963  0 
ide_gd_mod             13180  0 
sd_mod                 19913  0 
ahci                   17555  0 
libahci                15397  1 ahci
libata                126160  2 ahci,libahci
scsi_mod              104754  2 sd_mod,libata
e1000e                109202  0 
pcspkr                  1263  0 
sermouse                2667  0 
input_polldev           2138  0 
ff_memless              3442  0 
newtonkbd               1490  0 
sunkbd                  3061  0 
xtkbd                   1654  0 
edd                     6034  0 
usbhid                 28631  0 
sl811_hcd               8181  0 
uhci_hcd               17338  0 
ohci_hcd               17687  0 
isp116x_hcd            11441  0 
ehci_hcd               30104  0 
usbcore                97532  7 usbhid,sl811_hcd,uhci_hcd,ohci_hcd,isp116x_hcd,ehci_hcd
---------------------- END LSMOD ---------------------

Outputs of 'lspci'
------------------------- lspci --------------------

00:00.0 Host bridge: Intel Corporation: Unknown device 0104 (rev 09)
00:02.0 VGA compatible controller: Intel Corporation: Unknown device 0126 (rev 09)
00:16.0 Communication controller: Intel Corporation: Unknown device 1c3a (rev 04)
00:16.3 Serial controller: Intel Corporation: Unknown device 1c3d (rev 04)
00:19.0 Ethernet controller: Intel Corporation: Unknown device 1502 (rev 04)
00:1a.0 USB Controller: Intel Corporation: Unknown device 1c2d (rev 04)
00:1b.0 Audio device: Intel Corporation: Unknown device 1c20 (rev 04)
00:1c.0 PCI bridge: Intel Corporation: Unknown device 1c10 (rev b4)
00:1c.2 PCI bridge: Intel Corporation: Unknown device 1c14 (rev b4)
00:1c.3 PCI bridge: Intel Corporation: Unknown device 1c16 (rev b4)
00:1c.7 PCI bridge: Intel Corporation: Unknown device 1c1e (rev b4)
00:1d.0 USB Controller: Intel Corporation: Unknown device 1c26 (rev 04)
00:1f.0 ISA bridge: Intel Corporation: Unknown device 1c4f (rev 04)
00:1f.2 SATA controller: Intel Corporation: Unknown device 1c03 (rev 04)
00:1f.3 SMBus: Intel Corporation: Unknown device 1c22 (rev 04)
0a:00.0 Network controller: Intel Corporation: Unknown device 0082 (rev 34)
0b:00.0 USB Controller: NEC Corporation: Unknown device 0194 (rev 04)
0c:00.0 Class ff00: Realtek Semiconductor Co., Ltd.: Unknown device 5209 (rev 01)
0c:00.1 Class 0805: Realtek Semiconductor Co., Ltd.: Unknown device 5209 (rev 01)
---------------------- END lspci ---------------------

Outputs of 'lspci -n'
------------------------- lspci -n --------------------

00:00.0 Class 0600: 8086:0104 (rev 09)
00:02.0 Class 0300: 8086:0126 (rev 09)
00:16.0 Class 0780: 8086:1c3a (rev 04)
00:16.3 Class 0700: 8086:1c3d (rev 04)
00:19.0 Class 0200: 8086:1502 (rev 04)
00:1a.0 Class 0c03: 8086:1c2d (rev 04)
00:1b.0 Class 0403: 8086:1c20 (rev 04)
00:1c.0 Class 0604: 8086:1c10 (rev b4)
00:1c.2 Class 0604: 8086:1c14 (rev b4)
00:1c.3 Class 0604: 8086:1c16 (rev b4)
00:1c.7 Class 0604: 8086:1c1e (rev b4)
00:1d.0 Class 0c03: 8086:1c26 (rev 04)
00:1f.0 Class 0601: 8086:1c4f (rev 04)
00:1f.2 Class 0106: 8086:1c03 (rev 04)
00:1f.3 Class 0c05: 8086:1c22 (rev 04)
0a:00.0 Class 0280: 8086:0082 (rev 34)
0b:00.0 Class 0c03: 1033:0194 (rev 04)
0c:00.0 Class ff00: 10ec:5209 (rev 01)
0c:00.1 Class 0805: 10ec:5209 (rev 01)
---------------------- END lspci -n ---------------------

Content of '/proc/partitions'
------------------------- /proc/partitions --------------------

major minor  #blocks  name

   8        0  312571224 sda
   8        1  105062400 sda1
   8        2  192149504 sda2
   8        3   15357952 sda3
---------------------- END /proc/partitions ---------------------

Content of '/proc/net/dev'
------------------------- /proc/net/dev --------------------

Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo: 6088649    4696    0    0    0     0          0         0  6088649    4696    0    0    0     0       0          0
  sit0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eth0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
---------------------- END /proc/net/dev ---------------------

Content of '/proc/cmdline'
------------------------- /proc/cmdline --------------------

BOOT_IMAGE=/ericsson/kernel ramdisk_size=328192 init=/bin/minit CONSOLE=/dev/tty1 vga=0x317 root=/dev/ram0 rw quiet irqpoll pci=nomsi EPE_LANGUAGE=ENU EPE_OSSEL=0 EPE_MBRID=064AF9A-0000000-0000000-0000000 initrd=./ericsson/initrd.gz
---------------------- END /proc/cmdline ---------------------

ls -l /lib/modules/
------------------------- /lib/modules/ --------------------

total 1
drwxr-xr-x 3 root root 1024 Dec 16 08:33 2.6.36-gentoo
---------------------- END /lib/modules/ ---------------------

uname -r
------------------------- uname -r --------------------

2.6.36-gentoo
---------------------- END uname -r ---------------------

Content of '/tmp/pcitable'
------------------------- /tmp/pcitable --------------------

"0x00008086"  "0x00001502" "0xffffffff" "0xffffffff" "e1000e" "Empirum detected Network Interface Card"
"0x00008086"  "0x00001c03" "0xffffffff" "0xffffffff" "ahci" "Empirum detected Mass Storage Controller"
---------------------- END /tmp/pcitable ---------------------

------------------------- Debug Messages --------------------
10 uncrypt reading disk.ini
0 uncrypt decrypting ...
0 uncrypt decryption completed successfully
5 syslog catching pending Kernel-messages
10 boot msg_enter
0 boot mounting /proc
0 boot mounting /sys
5 boot performing udev initial scan
5 boot making udev managing hotplug events
0 boot choosing network mode
0 boot  network mode:  dhcp
10 syslog starting klogd
10 syslog starting syslogd
0 boot setting up modul-dependentcies
0 boot setting hostname
0 boot checking if CPU has 64Bit capability
0 boot CPU has 64Bit capability
0 boot preparing modules
0 boot updating modules.conf
0 boot loading usb modules
10 lo entering runlevel
1 lo setting up loopback interface
1 lo Loopback interface succsessfully set up
10 httpd entering runlevel
10 startx entering runlevel
0 startx starting Tiny-X for framebuffer devices Xfbdev
1 httpd Configuring .htaccess
1 httpd htpassword successfully configured
1 httpd setting environment-variable $DESKTOP_DEST
1 httpd httpd starting httpd
0 startx setting DISPLAY-variable
0 startx Starting Browser
10 startx browser executed successfully
10 modsetup entering runlevel
0 modsetup preparing modules directory
0 modsetup removing usb_storage
0 modsetup loading edd support
0 modsetup loading input device driver
0 modsetup installing Driver xtkbd
0 modsetup installing Driver sunkbd
0 modsetup installing Driver newtonkbd
0 modsetup installing Driver ff-memless
0 modsetup installing Driver input-polldev
0 modsetup installing Driver sermouse
0 modsetup installing Driver pcspkr
0 modsetup installing Installing IDE-drivers
0 modsetup installing NIC-drivers
0 modsetup installing SCSI-drivers
0 modsetup loading scsi low-level-drivers
0 modsetup loading inserting scsi disk-driver
0 modsetup loading inserting ide disk-driver
0 modsetup loading fs-support
0 modsetup installing Driver smbfs
0 modsetup installing Driver ncpfs
0 modsetup installing Driver minix
0 modsetup installing Driver isofs
0 modsetup installing Driver reiserfs
0 modsetup installing Driver exportfs
0 modsetup installing Driver ntfs
0 modsetup installing Driver coda
0 modsetup installing Driver cifs
0 modsetup installing Driver xfs
0 modsetup installing Driver udf
0 modsetup installing Driver jfs
0 modsetup installing Driver msdos
0 modsetup installing Driver kafs
0 modsetup loading raid and lvm
0 modsetup installing Driver md-mod
0 modsetup installing Driver linear
0 modsetup installing Driver dm-snapshot
0 modsetup installing Driver raid10
0 modsetup installing Driver dm-multipath
0 modsetup installing Driver raid1
0 modsetup installing Driver raid0
0 modsetup installing Driver dm-region-hash
0 modsetup installing Driver dm-crypt
0 modsetup installing Driver multipath
0 modsetup installing Driver raid456
0 modsetup installing Driver dm-round-robin
0 modsetup installing Driver dm-mod
0 modsetup installing Driver dm-log
0 modsetup installing Driver dm-zero
0 modsetup installing Driver dm-mirror
0 modsetup Network Adapter: 0x00008086-0x00001502-0xffffffff-0xffffffff 
0 modsetup Storage Adapter: 0x00008086-0x00001c03-0xffffffff-0xffffffff 
------------------------- End Debug Messages --------------------

------------------------- EPE_Info.txt --------------------
OCT v2.86   Datum: 19.07.2010
	Contents: 	KERNEL		 	26.05.2010  
				modules.tgz     26.05.2010
				initrd		 	19.07.2010
				empirum.pcimap	25.03.2010
				
	DevTask 4024: Use custom logo. Load customized logo file /var/www/data/custom.gif instead of matrix42 logo
	Modified:	initrd -> startx
---------------------------------------------------------------------------
OCT v2.87   Datum: 20.07.2010
	Contents: 	KERNEL		 	20.07.2010  
				modules.tgz     20.07.2010
				initrd		 	19.07.2010
				empirum.pcimap	25.03.2010
				
	DevTask 4150: KernelUpdate to 2.6.34-gentoo-r1 and activated CONFIG_VMWARE_PVSCSI to support VMWARE-SCSI
	Modified:	KERNEL, modules.tgz
---------------------------------------------------------------------------
OCT v2.88   Datum: 20.08.2010
	Contents: 	KERNEL		 	20.07.2010  
				modules.tgz     20.07.2010
				initrd		 	20.08.2010
				empirum.pcimap	25.03.2010
				
	Bugfix 4487: Fehler in der Funktion getvarvalue. Der Kernelparameter EPE_LOAD_MODULES funktionierte dadurch nicht.
	Modified:	initrd
---------------------------------------------------------------------------
OCT v2.89   Datum: 08.09.2010
	Contents: 	KERNEL		 	20.07.2010  
				modules.tgz     20.07.2010
				initrd		 	08.09.2010
				empirum.pcimap	25.03.2010
				
	Bugfix 3644(Remedy 15492): Anpassungen im network-Skript, damit die ServerIP aus der disk.ini als Fallback-Lösung benutzt wird. 
							  Die ServerIP wird in /etc/hosts eingetragen, damit die Auflösung vom Servernamen erfolgen kann.
							  Zusätzlich wird der DNS aus der disk.ini in /etc/resolv.conf dann geschrieben, wenn der DHCP-Client diese Datei 
							  geschrieben hat, somit wird der DNS-Eintrag nicht überschrieben.
	Modified:	initrd
---------------------------------------------------------------------------
OCT v2.90   Datum: 18.10.2010
	Contents: 	KERNEL		 	18.10.2010
				modules.tgz		18.10.2010
				initrd		 	08.09.2010
				empirum.pcimap	25.03.2010
				
	Bugfix 5628(Remedy 15750): Mit Kernel-Update sind neue Firmwares erschienen. Die neue Firmwares für den Treiber bnx2 sind als External Firmwares 
								in das Kernel-Binary eingebaut
	Modified:	KERNEL und modules.tgz
---------------------------------------------------------------------------
OCT v2.91   Datum: 26.10.2010
	Contents: 	KERNEL		 	26.10.2010
				modules.tgz		26.10.2010
				initrd		 	08.09.2010
				empirum.pcimap	25.03.2010
				
	Kernel-Update auf 2.6.36-gentoo
	Modified:	KERNEL und modules.tgz
---------------------------------------------------------------------------
OCT v2.92   Datum: 01.11.2010
	Contents: 	KERNEL		 	26.10.2010
				modules.tgz		26.10.2010
				initrd		 	08.09.2010
				empirum.pcimap	25.03.2010
				
	Bugfix 6207: Erweiterung von Boottemplates um kundenspezifische Bilder im EPE-Browser darzustellen
	Modified:	setup.sql
---------------------------------------------------------------------------
OCT v2.93   Datum: 09.11.2010
	Contents: 	KERNEL		 	26.10.2010
				modules.tgz		26.10.2010
				initrd		 	09.11.2010
				empirum.pcimap	25.03.2010
				
	Bugfix 10120: BMC-Logo durch matrix42-logo ersetzt
	Modified:	/var/www/data/top2.gif
---------------------------------------------------------------------------
FLL v2.94   Datum: 24.11.2010
	Contents: 	KERNEL		 	26.10.2010
				modules.tgz		26.10.2010
				initrd		 	24.11.2010
				empirum.pcimap	25.03.2010
				
	Task 13372: Remove gethostbyname() from linux message binary
	Modified:	/bin/msgpxe
---------------------------------------------------------------------------
OCT v2.95   Datum: 25.11.2010
	Contents: 	KERNEL		 	26.10.2010
				modules.tgz		26.10.2010
				initrd		 	25.11.2010
				empirum.pcimap	25.03.2010
				
	Bugfix 13311: Rekursive Ausführungsrechte 755 für /var/www/data/select/,damit auch für Eis32Prompt
	Modified:	/etc/minit/boot/run2
---------------------------------------------------------------------------
OCT v2.96   Datum: 03.12.2010
	Contents: 	KERNEL		 	26.10.2010
				modules.tgz		26.10.2010
				initrd		 	03.12.2010
				empirum.pcimap	25.03.2010
				
	Task 7576: Erweiterungen um BMC-Features
	Modified:	/bin/functions.sh, /etc/minit/network/run2
	Neu:		/sbin/tftp	#tftp-Client
---------------------------------------------------------------------------
OCT v2.97   Datum: 04.01.2010
	Contents: 	KERNEL		 	26.10.2010
				modules.tgz		26.10.2010
				initrd		 	04.01.2011
				empirum.pcimap	25.03.2010
				
	Bugfix 17706: Use ServerIP if it is given, otherwise get it via gethostbyname
	Modified:	/etc/minit/buildpxecmd/run2
---------------------------------------------------------------------------
OCT v2.98   Datum: 07.01.2010
	Contents: 	KERNEL		 	26.10.2010
				modules.tgz		26.10.2010
				initrd		 	07.01.2011
				empirum.pcimap	25.03.2010
				
	Bugfix 17730: Syntax error in buildpxecmd
	Modified:	/etc/minit/buildpxecmd/run2
---------------------------------------------------------------------------
FLL v2.99   Datum: 18.01.2010
	Contents: 	KERNEL		 	26.10.2010
				modules.tgz		26.10.2010
				initrd		 	18.01.2011
				empirum.pcimap	25.03.2010
				
	Task 7576:  Enhancements on dhclient for BMC
	Modified:	dhclient
	New files:  /etc/dhclient-matrix42.conf, /etc/dhclient-matrix42.script
---------------------------------------------------------------------------
OCT v3.01   Datum: 20.01.2010
	Contents: 	KERNEL		 	26.10.2010
				modules.tgz		26.10.2010
				initrd		 	20.01.2011
				empirum.pcimap	25.03.2010
				
	Task 7576:  Enhancements on dhclient for BMC
	Modified:	/bin/functions.sh -> Fct.: checknextserver_and_getconfigfile
				runlevel-network -> Call of checknextserver_and_getconfigfile
-----------------------------------------------------------------------------
OCT v3.02   Datum: 28.01.2010
	Contents: 	KERNEL		 	26.10.2010
				modules.tgz		26.10.2010
				initrd		 	28.01.2011
				empirum.pcimap	25.03.2010
				
	Task 18144: New OS type ESXi4
	Modified:	New folders/files esx4/run and esxi4/run in prepare/vmware/
-------------------------------------------------------------------------------
OCT v3.03   Datum: 23.02.2010
	Contents: 	KERNEL		 	23.02.2011
				modules.tgz		23.02.2011
				initrd		 	28.01.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		19172 and 19243: Added missing firmwares for bnx2 and bnx2x
								 bnx2x-e1-4.8.53.0.fw bnx2x-e1-5.0.21.0.fw bnx2x-e1-5.2.13.0.fw bnx2x-e1-5.2.7.0.fw 
								 bnx2x-e1h-4.8.53.0.fw bnx2x-e1h-5.0.21.0.fw bnx2x-e1h-5.2.13.0.fw bnx2x-e1h-5.2.7.0.fw 
								 bnx2/bnx2-mips-06-4.6.16.fw bnx2/bnx2-mips-06-5.0.0.j3.fw 
								 bnx2/bnx2-mips-06-5.0.0.j6.fw bnx2/bnx2-mips-09-4.6.17.fw 
								 bnx2/bnx2-mips-09-5.0.0.j15.fw bnx2/bnx2-mips-09-5.0.0.j3.fw 
								 bnx2/bnx2-mips-09-5.0.0.j9.fw bnx2/bnx2-rv2p-06-4.6.16.fw 
								 bnx2/bnx2-rv2p-06-5.0.0.j3.fw bnx2/bnx2-rv2p-09-4.6.15.fw 
								 bnx2/bnx2-rv2p-09-5.0.0.j10.fw bnx2/bnx2-rv2p-09-5.0.0.j3.fw 
								 bnx2/bnx2-rv2p-09ax-5.0.0.j10.fw bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw 
	Modified:	KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.04   Datum: 25.02.2010
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	28.01.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		PRB22115: Added new driver "hpsa" for HP Smart Arrays
	Modified:	KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.05   Datum: 01.03.2010
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	01.03.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		18880: Handling of special characters (\ $ ?) in passwords
	Modified:	initrd: /bin/functions.sh
-------------------------------------------------------------------------------
OCT v3.06   Datum: 14.03.2010
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	14.03.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		20135: Reading of configfile from TFTP-Cache
	Modified:	initrd: /bin/functions.sh
-------------------------------------------------------------------------------
OCT v3.07   Datum: 17.03.2010
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	17.03.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		20076: Replace also PXE-ServerIP (if EmpirumServer=PXE-Server) if EmpSRVLong from configuration
						should be replace via DHCP-Options or configfile in TFTP-Root
	Modified:	initrd: /bin/functions.sh, buildpxecmd
-------------------------------------------------------------------------------
OCT v3.08   Datum: 11.04.2010
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	11.04.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		21603: Variables from the CFG-File from BMC should be read before. 
	Modified:	initrd: runlevel network
-------------------------------------------------------------------------------
OCT v3.09   Datum: 20.04.2010
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	20.04.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		21598: Do not abort if unattend.xml file for vista+ not found on server
	Modified:	initrd: runlevel getconfig
-------------------------------------------------------------------------------------------------------- End EPE_Info.txt --------------------

EPE SPY:

Code: Select all

[NIC_0]
vendorid=0x00008086
deviceid=0x00001502
subvendorid=0xffffffff
subdeviceid=0xffffffff

[STO_0]
vendorid=0x00008086
deviceid=0x00001c03
subvendorid=0xffffffff
subdeviceid=0xffffffff

[Rene]

Gemäss Hinweis beim Import Assistent heisst es dort, dass das Image nicht grösser als 4 GB sein sollte. Anderenfalls muss es mit imageX geteilt werden. Wie das allerdings gemacht wird, fehlt in der Beschreibung.

[JeeCay]

Gemäss Hinweis beim Import Assistent heisst es dort, dass das Image nicht grösser als 4 GB sein sollte. Anderenfalls muss es mit imageX geteilt werden. Wie das allerdings gemacht wird, fehlt in der Beschreibung.

Stimmt ja... Das wird wohl das Problem sein. Das Image wird nicht mit Empirum gesplittet, sondern wohl (also mit ImageX selbst): http://technet.microsoft.com/en-us/libr ... S.10).aspx

[Rene]

Richtig

[JeeCay]

Richtig

@John: Probierst du das aus? Wenn ja, wäre es schön, wenn du sagst, ob das die Lösung war.

[John Carmack]

Hey, Danke...

bin grad dabei mein 4,5GB Image zu splitten.

Ich gehe mal davon aus das mich das Empirum beim Importieren dann nach einer zweiten CD/DVD fragt?

[JeeCay]

Hey, Danke...

bin grad dabei mein 4,5GB Image zu splitten.

Ich gehe mal davon aus das mich das Empirum beim Importieren dann nach einer zweiten CD/DVD fragt?

Hm, gute Frage. Hast du das denn auf einer DVD oder liegt das auf einer Festplatte/im Netzwerk? Wenn das auf einer HDD gespeichert ist, sollte er ja nicht fragen müssen.

[John Carmack]

OK,

habe jetzt mein 4,5GB Image auf der Festplatte.

Ich habe das install.wim in 2 Teile gesplittet.

1x3GB DataPart.swm
und
1x 1,5GB DataPart2.swm

frag mich grad wie ich das im Empirum Importieren soll?

[JeeCay]

OK,

habe jetzt mein 4,5GB Image auf der Festplatte.

Ich habe das install.wim in 2 teile gesplittet.

1x3GB DataPart1.swm
und
1x 1,5GB DataPart2.swm

frag mich grad wie ich das im Empirum Importieren soll?

Also, als als ich nur die Install.wim hatte, habe ich die OS-Sourcen lokal kopiert und die vorhandene install.wim durch meine ersetzt, dann musst du noch mit dem WAIK ein neues Katalogfile erstellen. Anschließend habe ich das ganz normal eingebunden. So würde ich das nun auch machen... Die Frage ist dann natürlich, ob man die Install.wim noch braucht, wenn es gesplittet wurde.

[John Carmack]

häh? sorry, das verstehe ich nicht so ganz...

Was mach ich denn nun mit den beiden SWM Files?

Ich habe ein über 4GB Großes Install.wim file und eben 2 kleinere swm files.
Ich finde im Moment auch keine Anleitung wie ich aus 2 swm files zwei getrennte DVDs erstelle.

[JeeCay]

Wieso auf DVD brennen?
Wir haben hier ein ISO gehabt, mit dem hab ich den Rechner aufgesetzt. Dort habe ich Pachte, etc. installiert und dann per ImageX die install.wim erstellt. Des weiteren habe ich das ISO lokal entpackt. Die darin vorhandene install.wim habe ich durch meine selbst erstellte ersetzt und dazu noch mit dem WAIK ein neues Catalogfile erstellt.
Das entpackte ISO (mit meiner install.wim) habe ich dann in Empirum importiert - quasi wie eine DVD, nur halt von der Festplatte.

[John Carmack]

Irgendwie reden wir beide aneinader vorbei... Trotzdem Danke das du mir hilfst

Ja, ich habe alle Dateien lokal auf der Platte auf der auch Empirum installiert ist.

Mit der install.wim (4,5GB) ist eine automatisierte installation nicht möglich.
Ohne der install.wim ist ein Import des OS in Empirum nicht möglich.

Lokal habe ich jetzt das gesamte Installationsmedium (Win7) und zwei seperate swm files die zusammen meine Install.wim ergeben.

Wie importiere ich das jetzt? Ich muss dem Empirum doch irgendwie sagen das ich jetzt ein gesplittetes Installations medium habe.

[JeeCay]

Sorry, habs grad selbst probiert. Jetzt ist mir klar was du meinst... =)

Ohne install.wim kein Import... Super... Jetzt würde ich auch gerne wissen, was Empirum von mir erwartet....