Package Robot PDF Creator
Moderator: MVogt
Package Robot PDF Creator
hallo,
das gleiche problem wie mit dem irfanviewer habe ich mit pdf creator.
allerdings spinnt da das scipt schon. läuft bis zur hälfte automatisch durch und dann geht gar nichts mehr.
wenn ich mit dem analyzer da den button drücke funktioniert dann gar nichts mehr.
würde mich über hilfe freuen und entschuldige meine unwissenheit. ich versuche mein bestes besser zu werden:-)
mfg
michael
das gleiche problem wie mit dem irfanviewer habe ich mit pdf creator.
allerdings spinnt da das scipt schon. läuft bis zur hälfte automatisch durch und dann geht gar nichts mehr.
wenn ich mit dem analyzer da den button drücke funktioniert dann gar nichts mehr.
würde mich über hilfe freuen und entschuldige meine unwissenheit. ich versuche mein bestes besser zu werden:-)
mfg
michael
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Package Robot PDF Creator
Siehe http://www.matrix42.de/forum/posting.ph ... 20&t=11803
Optional kann man im Internet ein fertiges MSI finden.
Für 4.0.6 hätte ich auch ein fertiges Paket auf der Basis.
Optional kann man im Internet ein fertiges MSI finden.
Für 4.0.6 hätte ich auch ein fertiges Paket auf der Basis.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Package Robot PDF Creator
Habe das Paket einfach mal hier bereitgestellt:
https://matrix42.box.com/s/ppw284g6lpestm5fsdmf
https://matrix42.box.com/s/ppw284g6lpestm5fsdmf
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Package Robot PDF Creator
danke für das paket aber wir arbeiten mit dem pdf creator nicht mit freepdf.
gibt es für den pdf creator von pdfforge auch ein paket?
wenn "nein" können sie mir dann sagen warum package robot einfach aufhört?
mfg
michael
gibt es für den pdf creator von pdfforge auch ein paket?
wenn "nein" können sie mir dann sagen warum package robot einfach aufhört?
mfg
michael
Re: Package Robot PDF Creator
Da steht jedenfalls das "PDF Creator" genutzt wird und nicht freepdfmpaschkio wrote: das gleiche problem wie mit dem irfanviewer habe ich mit pdf creator.
Daher hat Scheffe Ambrosius auch mal das PDF Creator Package auf box.com abgelegt "https://matrix42.box.com/s/ppw284g6lpestm5fsdmf"
Re: Package Robot PDF Creator
also entweden bin ich blind oder sie schicken mir den falschen link -
beide download links von ihnen beinhaltet das paket für freepdf version 4.0.6 und nicht pdr creator!
wäre nett wenn sie das mal überprüfen könnten....
mfg
michael paschki
beide download links von ihnen beinhaltet das paket für freepdf version 4.0.6 und nicht pdr creator!
wäre nett wenn sie das mal überprüfen könnten....
mfg
michael paschki
Re: Package Robot PDF Creator
Dann hat er wohl das falsche Paket verlinkt
Re: Package Robot PDF Creator
alles klar, dann warte ich mal auf den richtigen link
in der zwischenzeit habe ich noch mal versucht ein normales paket zu erstellen.
hab mit dem befehl Setup.exe /SAVEINF="%TEMP%\custom.inf" eine custom.inf erstellt. diese wollte ich dann mit dem script verlinken so das er bei der installation sich die einstellungen holt. installiert wird das paket zwar doch nicht custom sondern voll.
kann mal bei gelegenheit jemand schauen wo mein fehler liegt?
https://www.box.com/s/w3mtb5209jiwrr8qssbh
mfg
michael
in der zwischenzeit habe ich noch mal versucht ein normales paket zu erstellen.
hab mit dem befehl Setup.exe /SAVEINF="%TEMP%\custom.inf" eine custom.inf erstellt. diese wollte ich dann mit dem script verlinken so das er bei der installation sich die einstellungen holt. installiert wird das paket zwar doch nicht custom sondern voll.
kann mal bei gelegenheit jemand schauen wo mein fehler liegt?
https://www.box.com/s/w3mtb5209jiwrr8qssbh
mfg
michael
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Package Robot PDF Creator
Dann habe ich mich geirrrt - für den PDF Creator habe ich kein Paket.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Package Robot PDF Creator
können sie mir dann wenigstens helfen wo das problem liegen könnte?
mfg
michael paschki
mfg
michael paschki
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Package Robot PDF Creator
Nein, habe mit diesem Produkt keine Erfahrungen.
Wie wäre ein Schwenk auf FreePDF?
Wie wäre ein Schwenk auf FreePDF?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Package Robot PDF Creator
hatten wir damals im einsatz aber pdfcreator hat mehrer möglichkeiten die unsere user nutzen.
deswegen sind wir seit einem guten jahr von freepdf weg.
ok, dann werde ich wohl versuchen das problem alleine zu lösen.
trotzdem danke für ihr bemühen.
mfg
michael paschki
deswegen sind wir seit einem guten jahr von freepdf weg.
ok, dann werde ich wohl versuchen das problem alleine zu lösen.
trotzdem danke für ihr bemühen.
mfg
michael paschki
-
- Moderator
- Posts: 7965
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Package Robot PDF Creator
Gibt doch bestimmt Teilnehmer im Forum die da helfen können.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Package Robot PDF Creator
Hallo,
die Installationszeile des Paketes sieht doch ganz gut aus, nur die .inf-Datei liegt in %SRC% und nicht im %temp%
Grüße aus Hannover
Thomas
die Installationszeile des Paketes sieht doch ganz gut aus, nur die .inf-Datei liegt in %SRC% und nicht im %temp%
Grüße aus Hannover
Thomas
Alles wird gut...irgendwann....irgendwo....
Empirum 16.1.3
Empirum 16.1.3
Re: Package Robot PDF Creator
alles klar, werde ich mal ausprobieren - vielen dank für die schnelle hilfe
mfg
michael paschki
mfg
michael paschki
Who is online
Users browsing this forum: No registered users and 10 guests