Update von 15.0 auf 15.1: Import WADK
Moderator: jknoth
-
- Posts: 276
- Joined: 08. Jul 2009, 13:37
- Location: Leipzig
- Contact:
Update von 15.0 auf 15.1: Import WADK
Hallo an alle,
ich habe das WADK mit den Bereitstellungs-Tools und WinPE installiert.
Beim Import des WADK x86/x64 wird erst einiges getan, auch pro Versuch ein Ordner angelegt, der jeweils eine Größe von 708 MB/862 MB hat. Trotzdem bekomme ich den Fehler "Fehler beim Kopieren". Platz ist auf dem Ziellaufwerk genug.
Ich habe bis hierhin das Update nach dem Step-by-Step-Guide ausgeführt. Habe ich was übersehen?
ich habe das WADK mit den Bereitstellungs-Tools und WinPE installiert.
Beim Import des WADK x86/x64 wird erst einiges getan, auch pro Versuch ein Ordner angelegt, der jeweils eine Größe von 708 MB/862 MB hat. Trotzdem bekomme ich den Fehler "Fehler beim Kopieren". Platz ist auf dem Ziellaufwerk genug.
Ich habe bis hierhin das Update nach dem Step-by-Step-Guide ausgeführt. Habe ich was übersehen?
EMPIRUM v21.0.3; RemoteControl (2nd NIC); ESM v12.0.1.1174; SQL Server 2014 Std; Windows Server 2016 Std
-
- Moderator
- Posts: 7975
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Update von 15.0 auf 15.1: Import WADK
Versuchen Sie mal die Konsole mit "als Administrator ausführen" zu starten oder die UAC abzuschalten.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 276
- Joined: 08. Jul 2009, 13:37
- Location: Leipzig
- Contact:
Re: Update von 15.0 auf 15.1: Import WADK
Hallo Herr Ambrosius,
die EMC wird schon als Admin ausgeführt. Das Abschalten der UAC hat nichts gebracht.
Gibt es ein Log-File für diesen Vorgang?
die EMC wird schon als Admin ausgeführt. Das Abschalten der UAC hat nichts gebracht.
Gibt es ein Log-File für diesen Vorgang?
EMPIRUM v21.0.3; RemoteControl (2nd NIC); ESM v12.0.1.1174; SQL Server 2014 Std; Windows Server 2016 Std
-
- Moderator
- Posts: 7975
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Update von 15.0 auf 15.1: Import WADK
Eventuell ja - mit DebugView. Einfach mal checken.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Re: Update von 15.0 auf 15.1: Import WADK
Hallo,
geht der Import anderer OS Quellen?
Generell kann man bei OS Imports auch als Zielpfad %temp% angeben. Dann wird nicht im PackageStore zwischengespeichert sondern lokal.
Zudem haben wir bei einem Computer ein "Phänomen" gesehen, wenn auf dem Empirum Server die NTFS Komprimierung für das Configurator Verzeichnis eingeschaltet war. Konnte aber nirgendwo anders reproduziert werden.
Gruß
geht der Import anderer OS Quellen?
Generell kann man bei OS Imports auch als Zielpfad %temp% angeben. Dann wird nicht im PackageStore zwischengespeichert sondern lokal.
Zudem haben wir bei einem Computer ein "Phänomen" gesehen, wenn auf dem Empirum Server die NTFS Komprimierung für das Configurator Verzeichnis eingeschaltet war. Konnte aber nirgendwo anders reproduziert werden.
Gruß
Horst Droege
Chief Product Architect
Matrix42 AG
Elbinger Strasse 7
60487 Frankfurt
http://www.matrix42.com/de
Twitter: @i_horst
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG or of the support team.
Chief Product Architect
Matrix42 AG
Elbinger Strasse 7
60487 Frankfurt
http://www.matrix42.com/de
Twitter: @i_horst
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG or of the support team.
-
- Posts: 276
- Joined: 08. Jul 2009, 13:37
- Location: Leipzig
- Contact:
Re: Update von 15.0 auf 15.1: Import WADK
Das Komprimieren ist nicht aktiv.
Das/die DebugView gibt aus, dass beim Kopieren einer desktop.ini der Zugriff verweigert wird.
Kann man diese Dateien irgend wie ausschließen?
Das/die DebugView gibt aus, dass beim Kopieren einer desktop.ini der Zugriff verweigert wird.
Kann man diese Dateien irgend wie ausschließen?
EMPIRUM v21.0.3; RemoteControl (2nd NIC); ESM v12.0.1.1174; SQL Server 2014 Std; Windows Server 2016 Std
Re: Update von 15.0 auf 15.1: Import WADK
Hallo,
bitte versuchen Sie als Ziel %temp% anzugeben.
Gruß
bitte versuchen Sie als Ziel %temp% anzugeben.
Gruß
Horst Droege
Chief Product Architect
Matrix42 AG
Elbinger Strasse 7
60487 Frankfurt
http://www.matrix42.com/de
Twitter: @i_horst
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG or of the support team.
Chief Product Architect
Matrix42 AG
Elbinger Strasse 7
60487 Frankfurt
http://www.matrix42.com/de
Twitter: @i_horst
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG or of the support team.
-
- Posts: 276
- Joined: 08. Jul 2009, 13:37
- Location: Leipzig
- Contact:
Re: Update von 15.0 auf 15.1: Import WADK
Habe das Ziel auf %Temp% umgelegt, hilft auch nichts. Die desktop.ini scheinen erstmal das Problem zu sein.
Der Import bzw. "Liste von der Festplatte lesen" hat geklappt. Die OS wurden reimportiert.
Der Import bzw. "Liste von der Festplatte lesen" hat geklappt. Die OS wurden reimportiert.
EMPIRUM v21.0.3; RemoteControl (2nd NIC); ESM v12.0.1.1174; SQL Server 2014 Std; Windows Server 2016 Std
-
- Moderator
- Posts: 7975
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Update von 15.0 auf 15.1: Import WADK
Und Sie hatten nach dem Abschalten der UAC auch den Rechner auf dem die Konsole läuft durchgestartet?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 276
- Joined: 08. Jul 2009, 13:37
- Location: Leipzig
- Contact:
Re: Update von 15.0 auf 15.1: Import WADK
Ja. Ist der Empirum-Server selbst.
EMPIRUM v21.0.3; RemoteControl (2nd NIC); ESM v12.0.1.1174; SQL Server 2014 Std; Windows Server 2016 Std
Re: Update von 15.0 auf 15.1: Import WADK
Hallo,
wir sprechen aber von 15.1 Patch 02 bzw.03?
Gruß
wir sprechen aber von 15.1 Patch 02 bzw.03?
Gruß
Horst Droege
Chief Product Architect
Matrix42 AG
Elbinger Strasse 7
60487 Frankfurt
http://www.matrix42.com/de
Twitter: @i_horst
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG or of the support team.
Chief Product Architect
Matrix42 AG
Elbinger Strasse 7
60487 Frankfurt
http://www.matrix42.com/de
Twitter: @i_horst
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG or of the support team.
-
- Posts: 276
- Joined: 08. Jul 2009, 13:37
- Location: Leipzig
- Contact:
Re: Update von 15.0 auf 15.1: Import WADK
Nein, ich bin dabei von 15.0 auf 15.1 zu gehen. Die Patches 01 bis 03 wären danach dran.
EMPIRUM v21.0.3; RemoteControl (2nd NIC); ESM v12.0.1.1174; SQL Server 2014 Std; Windows Server 2016 Std
Re: Update von 15.0 auf 15.1: Import WADK
Hallo,
die Patches 1-3 sind recommended. Ich würde sie jedem dringend empfehlen.
Gruß
die Patches 1-3 sind recommended. Ich würde sie jedem dringend empfehlen.
Gruß
Horst Droege
Chief Product Architect
Matrix42 AG
Elbinger Strasse 7
60487 Frankfurt
http://www.matrix42.com/de
Twitter: @i_horst
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG or of the support team.
Chief Product Architect
Matrix42 AG
Elbinger Strasse 7
60487 Frankfurt
http://www.matrix42.com/de
Twitter: @i_horst
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG or of the support team.
Re: Update von 15.0 auf 15.1: Import WADK
Kann es eine Einstellung eines Virenscanners auf dem Matrixservers sein?
-
- Posts: 276
- Joined: 08. Jul 2009, 13:37
- Location: Leipzig
- Contact:
Re: Update von 15.0 auf 15.1: Import WADK
Kann ich die denn schon jetzt anwenden, obwohl ich noch nicht mit dem Step-by-Step-Update Guide fertig bin?
EMPIRUM v21.0.3; RemoteControl (2nd NIC); ESM v12.0.1.1174; SQL Server 2014 Std; Windows Server 2016 Std
Who is online
Users browsing this forum: No registered users and 1 guest