OS Installer Boot Images für WinPE gelöscht

Moderator: jknoth

Post Reply
cyberede
Posts: 27
Joined: 31. Jan 2013, 09:10
Contact:

OS Installer Boot Images für WinPE gelöscht

Post by cyberede » 21. Apr 2020, 14:43

Hallo,
ich arbeite mit Empirum Version 20.0.0.
Ich habe in der Konfiguration -> OS Installer -> PXE Verwaltung -> Images -> Bootimages das Image für WinPE gelöscht und finden leider keinen Weg dies wieder herzustellen ?
Hat jemand eine Idee?
Gruß, cyberede
Attachments
2020-04-21 14_41_32-ege-emp01 - Royal TS.png
(31.35 KiB) Downloaded 251 times

cyberede
Posts: 27
Joined: 31. Jan 2013, 09:10
Contact:

Re: OS Installer Boot Images für WinPE gelöscht

Post by cyberede » 21. Apr 2020, 14:46

Ein Import von Images schlägt fehl. Siehe Screenshot.
Attachments
2020-04-21 14_44_31-ege-emp01 - Royal TS.png
(40.76 KiB) Downloaded 251 times

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: OS Installer Boot Images für WinPE gelöscht

Post by Hendrik_Ambrosius » 21. Apr 2020, 16:22

Das WINPE Bootimage wird über den Reiter "Boot-Konfigurationen" neu erstellt. Einfach auf Speichern drücken.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

cyberede
Posts: 27
Joined: 31. Jan 2013, 09:10
Contact:

Re: OS Installer Boot Images für WinPE gelöscht

Post by cyberede » 22. Apr 2020, 08:22

Nachdem ich jetzt die vorhandene Boot Konfiguration gelöscht habe und diese neu angelegt ist in der PXE Verwaltung nun ein neues Bootimage aufgetaucht. Beim Anklicken des Bootimages "WinPEx64" kommt jedoch die Meldung:
"Die initrd.gz Datei kann nicht geöffnet werden. Bitte erstellen Sie das PXE Image erneut" ?

Gruß, cyberede
Attachments
2020-04-22 08_17_13-ege-emp01 - Royal TS.png
(35.64 KiB) Downloaded 226 times

cyberede
Posts: 27
Joined: 31. Jan 2013, 09:10
Contact:

Re: OS Installer Boot Images für WinPE gelöscht

Post by cyberede » 22. Apr 2020, 09:35

Hallo,

diese Fehlermeldung mit der initrd.gz ist laut Aussage des Matrix42 Supports normal und wird irgendwann beseitigt.
Ich habe das PXE Image nun einem PC zugeordnet. Das Image wird jedoch beim Booten nicht geladen und es kommt folgende Meldung. Siehe Anhang.

Gruß, cyberede
Attachments
2020-04-22 09_35_08-IMG_4331.pdf - Adobe Acrobat Reader DC.png
(1.31 MiB) Downloaded 223 times

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: OS Installer Boot Images für WinPE gelöscht

Post by Hendrik_Ambrosius » 22. Apr 2020, 09:49

Diese Meldung ist ganz normal weil WinPE Images über diese Funktion nicht bearbeitet werden können.
Ist nur für EPE gedacht.

Zum neuen Fehler:
Bitte checken ob da WINPE Image dem PC zugewiesen ist.
Dann ein DebugView Log auf dem Server wo der PXE Dienst läuft erstellen und das Ergebnis ansehen bzw. posten.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

cyberede
Posts: 27
Joined: 31. Jan 2013, 09:10
Contact:

Re: OS Installer Boot Images für WinPE gelöscht

Post by cyberede » 22. Apr 2020, 10:31

Hallo,
im Anhang das das dbgview LOG file.
Der Client hat die IP Adresse 172.20.2.85

Gruß, cyberede
Attachments
dbgview.zip
(9.88 KiB) Downloaded 209 times

cyberede
Posts: 27
Joined: 31. Jan 2013, 09:10
Contact:

Re: OS Installer Boot Images für WinPE gelöscht

Post by cyberede » 22. Apr 2020, 11:28

Hallo,
ich habe nun in der Boot Konfiguration zusätzlich die BIOS Unterstützung für 64bit Architekturen ausgewählt und nun bootet das Image.

Gruß, cyberede

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: OS Installer Boot Images für WinPE gelöscht

Post by Hendrik_Ambrosius » 22. Apr 2020, 11:58

Ah - OK. Klassiker. Ist etwas doof gemacht von der Bedienung her - ist mir auch schon mal passiert.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

cyberede
Posts: 27
Joined: 31. Jan 2013, 09:10
Contact:

Re: OS Installer Boot Images für WinPE gelöscht

Post by cyberede » 22. Apr 2020, 12:35

Hallo,
jetzt bekomme ich allerdings eine Windows Setup Meldung:

Die Einstellung <ProductKey> kann nicht aus der Antwortdatei für die unbeaufsichtigte Installation gelesen werden.

Egal ob ich einen Key angebe oder die Installation ohne Angabe des Product Keys ausführe.

Gruß, cyberede

User avatar
Hendrik_Ambrosius
Moderator
Moderator
Posts: 7962
Joined: 13. Dec 2004, 23:10
Location: Adendorf/Lüneburg

Re: OS Installer Boot Images für WinPE gelöscht

Post by Hendrik_Ambrosius » 22. Apr 2020, 12:47

Dazu habe ich keine Idee - für meine Tests mache ich das immer ohne Key und es geht.
Eventuell mal andere OS Quellen versuchen?
Ansonsten kam das Thema auch schon ein oder zwei mal hier im Forum, vielleicht mal die alten Einträge checken ob was passt?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.

Post Reply

Return to “OS Installer”

Who is online

Users browsing this forum: No registered users and 5 guests