erstmal vielen Dank, dass es nun möglich ist, eine zweite Platte mit einzubeziehen. Das i-Tüpfelchen wäre noch das Setzen der Profil-Partiton wie bei EPE.
Nun habe ich allerdings das Problem, dass die zweite Platte doch nicht mit beachtet wird.
Ich habe dazu eine Variablen-Konfiguration mit folgenden Werten erstellt:
- SizeSystemPartition=100
- SizeDataPartition=0
- InterpretSizeInputAsPercentage=1
- MinimumSystemPartitionSizeInGB=120
- SizeWinREPartitionInMB=300
- PreferFastDisk=1
- SizeEfiPartitionInMB=100
- SizeMsrPartitionInMB=128
- PreserveDataPartition=0
- ConfigurationFileForAddditionalDisk=ZweitePlatte.json
Code: Select all
{
"Disks": [
{
"Comment_Disks": "----------- 1. Additional Disk -----------",
"Comment_PartitionSizeAsPercentage": [
"PartitionSizeAsPercentage specifies if the partition size values should be interpreted as percentage values or GB values:",
"- true: Interprets the partition size values as percent values",
"- false: Interprets the partition size values as GB values"
],
"PartitionSizeAsPercentage": true,
"Comment_PreserveMode": [
"The PreserveMode value specifies the handling of already existing partitions:",
"- 0: All partitions will always be removed and recreated",
"- 1: The partition will be keeped if it was made by empirum (or will be created if not exists).",
" Partition sizes and labels must match the configuration to be retained."
],
"PreserveMode": 0,
"Comment_Partitions": "The list of all partitions of the first disk",
"Partitions":
{
"Comment_Partitions": "----------- 1. Partition -----------",
"Comment_PartitionSize": "Partition size in GB value or percentage",
"PartitionSize": 100,
"Comment_PartitionLabel": "Label of the partition",
"PartitionLabel": "DATEN"
}
}
]
}
Wahrscheinlich ist es wieder nur eine Kleinigkeit, aber ich komme im Moment nicht drauf.