Hallo zusammen,
aktuell versuche ich ein paar Geräte mit einem VHD-Image zu betanken und komme da nur bedingt weiter.
Ausgangslage:
Ich habe nicht auf alles Zugriff wie z.B. den Microsoft Store. Dort sind aber mittlerweile ein paar Treiber hinterlegt und es werden wohl in Zukunft nicht weniger die diesen Weg gehen wollen. Daher wollte ich eine alternative schaffen und mit Images arbeiten die dann auf baugleiche Geräte verteilt werden können.
Problem:
Nach Erstellung des Images und beim Versuch dieses wieder zu verteilen bekomme ich auf dem Zielgerät immer die Meldung "couldnt find bootable OS" und weiß aktuell nicht wo ich da weitersuchen soll.
Liegts an fehlerhafter Vorbereitung oder fehlenden Variablen?
Hat hier jemand schon Erfahrungen gemacht und kann helfen?
Danke und Grüße
Erstellung u. Verteilung via VHD-Image
-
- Posts: 11
- Joined: 24. Feb 2021, 12:23
- Contact:
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Erstellung u. Verteilung via VHD-Image
Haben Sie vor der Image Erstellung die Recovery Partition gelöscht?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 11
- Joined: 24. Feb 2021, 12:23
- Contact:
Re: Erstellung u. Verteilung via VHD-Image
Nein das habe ich jetzt in diesem Fall nicht gemacht.
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Erstellung u. Verteilung via VHD-Image
Das wird laut Anleitung empfohlen. Sieht mir danach aus. Bitte mal testen.
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
-
- Posts: 11
- Joined: 24. Feb 2021, 12:23
- Contact:
Re: Erstellung u. Verteilung via VHD-Image
Leider führt das auch nicht zum erfolg :/
Folgendes habe ich bisher getestet
Test 1
Windows Installation auf neuem Gerät samt Updates
Recovery Partition nicht gelöscht
Sysprep nicht durchgeführt
Im Anschluss dann via Empirum
DiskImageCreate - ohne Fehler
DiskImageDeploy - mit Fehlern
Ergebnis: kein Bootdevice gefunden
Test 2
Windows Installation auf neuem Gerät samt Updates
Recovery Partition gelöscht
Sysprep durchgeführt
DiskImageCreate - ohne Fehler
DiskImageDeploy - mit Fehlern
Ergebnis: kein Bootdevice gefunden
Alle anderen Tests führen zum selben ergebnis das Empirum beim installieren des VHD Images probleme hat die ich nicht näher aus den Logs nehmen kann..
Error at executing DiskImageDeploy
Could not Install VHD file
Im debug_diskimagecreate.log sind auch keine Fehler zu finden.
Irgendwelche Dokus die nicht auf den offiziellen Seiten zu finden sind bzw. Ideen wie ich hier weiter vorgehen kann?
Folgendes habe ich bisher getestet
Test 1
Windows Installation auf neuem Gerät samt Updates
Recovery Partition nicht gelöscht
Sysprep nicht durchgeführt
Im Anschluss dann via Empirum
DiskImageCreate - ohne Fehler
DiskImageDeploy - mit Fehlern
Ergebnis: kein Bootdevice gefunden
Test 2
Windows Installation auf neuem Gerät samt Updates
Recovery Partition gelöscht
Sysprep durchgeführt
DiskImageCreate - ohne Fehler
DiskImageDeploy - mit Fehlern
Ergebnis: kein Bootdevice gefunden
Alle anderen Tests führen zum selben ergebnis das Empirum beim installieren des VHD Images probleme hat die ich nicht näher aus den Logs nehmen kann..
Error at executing DiskImageDeploy
Could not Install VHD file
Im debug_diskimagecreate.log sind auch keine Fehler zu finden.
Irgendwelche Dokus die nicht auf den offiziellen Seiten zu finden sind bzw. Ideen wie ich hier weiter vorgehen kann?
-
- Moderator
- Posts: 7966
- Joined: 13. Dec 2004, 23:10
- Location: Adendorf/Lüneburg
Re: Erstellung u. Verteilung via VHD-Image
Können Sie mal die Log Dateien aus \empinst$\Wizard\OS\WinPeStatus\ für den Rechner schicken?
Hendrik Ambrosius / Senior Presales Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 GmbH | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 or of the support team.
Who is online
Users browsing this forum: No registered users and 6 guests