Hallo Leute,
ich habe nun trotz der Anleitung die auf dem Empirum Server liegt, das Problem, das ich es nicht schaffe auf einem Rechner Windows 7 Automatisiert zu installieren.
Es handelt sich um einen Dell T3500 und ein Windows 7 Enterprise (kein OEM).
Ich habe ein Template für die Windows 7 Installation und auch ein Boot Medium erstellt.
Doch es funktioniert einfach nicht.
Hier mal ein Auszug aus dem PXE Log des Rechners:
WEI-W189 20.05.2010 10:59:06 [Eis32] Performing reboot.
WEI-W189 20.05.2010 10:59:06 [Eis32] Error No: 110 Copy of Operating System files failed!
WEI-W189 20.05.2010 10:59:05 [Eis32] Transferring WinPE 2.x files [about 8 minutes...]
WEI-W189 20.05.2010 10:58:57 [Eis32] Transferring OS installation source files [about 15 minutes...]
WEI-W189 20.05.2010 10:58:57 [Eis32] Transferring OS sources from: WEI-VSEMP04 win7/x86/PRO/0/DE
WEI-W189 20.05.2010 10:58:57 [Eis32] Copying installation files.
WEI-W189 20.05.2010 10:58:57 [Eis32] Total elapsed time: 1 min
WEI-W189 20.05.2010 10:58:57 [Eis32] Hard disk formating/partitioning successful.
WEI-W189 20.05.2010 10:58:57 [Eis32] Disk: 1 MB: 152587 parttypes/MB: 222/109 7/39997 15/112462 0/0
WEI-W189 20.05.2010 10:58:57 [Eis32] Disk: 0 MB: 152587 parttypes/MB: 12/31996 12/8001 0/0 0/0
WEI-W189 20.05.2010 10:58:56 [Eis32] Created partition: 2 on disk: 0 with size: 8001
WEI-W189 20.05.2010 10:58:48 [Eis32] Creating partition: 2 on disk: 0 with size: 8000
WEI-W189 20.05.2010 10:58:48 [Eis32] Created partition: 1 on disk: 0 with size: 31996
WEI-W189 20.05.2010 10:58:32 [Eis32] Creating partition: 1 on disk: 0 with size: 32000
WEI-W189 20.05.2010 10:58:32 [Eis32] Using service partition: 2 on disk: 0
WEI-W189 20.05.2010 10:58:32 [Eis32] Using system partition: 1 on disk: 0
WEI-W189 20.05.2010 10:58:31 [Eis32] Creating partitions.
WEI-W189 20.05.2010 10:58:31 [Eis32] Disk: 1 MB: 152587 parttypes/MB: 222/109 7/39997 15/112462 0/0
WEI-W189 20.05.2010 10:58:31 [Eis32] Disk: 0 MB: 152587 parttypes/MB: 0/0 0/0 0/0 0/0
WEI-W189 20.05.2010 10:58:31 [Eis32] Deleting partitions.
WEI-W189 20.05.2010 10:58:31 [Eis32] Disk: 1 MB: 152587 parttypes/MB: 222/109 7/39997 15/112462 0/0
WEI-W189 20.05.2010 10:58:31 [Eis32] Disk: 0 MB: 152587 parttypes/MB: 12/49999 12/81995 12/8001 0/0
WEI-W189 20.05.2010 10:58:31 [Eis32] Preparing hard disks.
WEI-W189 20.05.2010 10:58:31 [Eis32] Target device for OS-Installation: /dev/sda
WEI-W189 20.05.2010 10:58:31 [Eis32] TCP/IP address: DHCP
WEI-W189 20.05.2010 10:58:31 [Eis32] Domain/Workgroup: Dom: PA
WEI-W189 20.05.2010 10:58:31 [Eis32] Computer name: WEI-W189
WEI-W189 20.05.2010 10:58:31 [Eis32] Image name: win7 x86 PRO DE SP0
WEI-W189 20.05.2010 10:58:31 [Eis32] Total elapsed time: 0 min
WEI-W189 20.05.2010 10:58:31 [Eis32] Connected Empirumserver: WEI-VSEMP04 IP: 10.1.0.193
WEI-W189 20.05.2010 10:58:31 [Eis32] Current client mac address: 0022192F8643 IP:
WEI-W189 20.05.2010 10:58:31 [Eis32] Empirum OS-Installation script Ver. 01.45
WEI-W189 20.05.2010 10:58:31 [Eis32] Empirum Eis32 Ver. 12.0.0.9
WEI-W189 20.05.2010 10:58:30 [seldest] entering runlevel
WEI-W189 20.05.2010 10:58:29 [getimage] entering runlevel
WEI-W189 20.05.2010 10:58:29 [getconfig] entering runlevel
WEI-W189 20.05.2010 10:58:29 [raidsetup] entering runlevel
WEI-W189 20.05.2010 10:58:27 [sshd ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [networking ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [epelog ] Empty mount point. Logs are saved local as /tmp/
WEI-W189 20.05.2010 10:58:27 [epelog ] EPE will automatically continue with the detection in 10 seconds
WEI-W189 20.05.2010 10:58:27 [epelog ] Optionally insert a USB device now. SPY and log will be copied
WEI-W189 20.05.2010 10:58:27 [modsetup ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [startx ] browser executed successfully
WEI-W189 20.05.2010 10:58:27 [logon] entering runlevel
WEI-W189 20.05.2010 10:58:27 [httpd ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [startx ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [lo ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [syslog ] starting syslogd
WEI-W189 20.05.2010 10:58:27 [sshd ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [syslog ] starting klogd
WEI-W189 20.05.2010 10:58:27 [networking ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [boot ] msg_enter
WEI-W189 20.05.2010 10:58:27 [epelog ] Empty mount point. Logs are saved local as /tmp/
WEI-W189 20.05.2010 10:58:27 [uncrypt ] decryption completed successfully
WEI-W189 20.05.2010 10:58:27 [epelog ] EPE will automatically continue with the detection in 10 seconds
WEI-W189 20.05.2010 10:58:27 [uncrypt ] decrypting ...
WEI-W189 20.05.2010 10:58:27 [epelog ] Optionally insert a USB device now. SPY and log will be copied
WEI-W189 20.05.2010 10:58:27 [uncrypt ] reading disk.ini
WEI-W189 20.05.2010 10:58:27 [modsetup ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [startx ] browser executed successfully
WEI-W189 20.05.2010 10:58:27 [httpd ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [startx ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [lo ] entering runlevel
WEI-W189 20.05.2010 10:58:27 [syslog ] starting syslogd
WEI-W189 20.05.2010 10:58:27 [syslog ] starting klogd
WEI-W189 20.05.2010 10:58:27 [boot ] msg_enter
WEI-W189 20.05.2010 10:58:27 [uncrypt ] decryption completed successfully
WEI-W189 20.05.2010 10:58:27 [uncrypt ] decrypting ...
WEI-W189 20.05.2010 10:58:27 [uncrypt ] reading disk.ini
WEI-W189 20.05.2010 10:05:51 [Eis32] Performing reboot.
WEI-W189 20.05.2010 10:05:51 [Eis32] Error No: 110 Copy of Operating System files failed!
WEI-W189 20.05.2010 10:05:50 [Eis32] Transferring WinPE 2.x files [about 8 minutes...]
WEI-W189 20.05.2010 10:05:49 [Eis32] Transferring OS installation source files [about 15 minutes...]
WEI-W189 20.05.2010 10:05:49 [Eis32] Transferring OS sources from: WEI-VSEMP04 win7/x86/PRO/0/DE
WEI-W189 20.05.2010 10:05:49 [Eis32] Copying installation files.
WEI-W189 20.05.2010 10:05:49 [Eis32] Total elapsed time: 1 min
WEI-W189 20.05.2010 10:05:48 [Eis32] Hard disk formating/partitioning successful.
WEI-W189 20.05.2010 10:05:48 [Eis32] Disk: 1 MB: 152587 parttypes/MB: 222/109 7/39997 15/112462 0/0
WEI-W189 20.05.2010 10:05:48 [Eis32] Disk: 0 MB: 152587 parttypes/MB: 12/49999 12/81995 12/8001 0/0
WEI-W189 20.05.2010 10:05:48 [Eis32] Created partition: 3 on disk: 0 with size: 8001
WEI-W189 20.05.2010 10:05:40 [Eis32] Creating partition: 3 on disk: 0 with size: 8000
WEI-W189 20.05.2010 10:05:40 [Eis32] Created partition: 2 on disk: 0 with size: 81995
WEI-W189 20.05.2010 10:05:39 [Eis32] Creating partition: 2 on disk: 0 with size: 82000
WEI-W189 20.05.2010 10:05:39 [Eis32] Created partition: 1 on disk: 0 with size: 49999
WEI-W189 20.05.2010 10:05:39 [Eis32] Creating partition: 1 on disk: 0 with size: 50000
WEI-W189 20.05.2010 10:05:39 [Eis32] Using service partition: 3 on disk: 0
WEI-W189 20.05.2010 10:05:39 [Eis32] Using system partition: 1 on disk: 0
WEI-W189 20.05.2010 10:05:39 [Eis32] Creating partitions.
WEI-W189 20.05.2010 10:05:39 [Eis32] Disk: 1 MB: 152587 parttypes/MB: 222/109 7/39997 15/112462 0/0
WEI-W189 20.05.2010 10:05:39 [Eis32] Disk: 0 MB: 152587 parttypes/MB: 0/0 0/0 0/0 0/0
WEI-W189 20.05.2010 10:05:39 [Eis32] Deleting partitions.
WEI-W189 20.05.2010 10:05:39 [Eis32] Disk: 1 MB: 152587 parttypes/MB: 222/109 7/39997 15/112462 0/0
WEI-W189 20.05.2010 10:05:39 [Eis32] Disk: 0 MB: 152587 parttypes/MB: 12/99998 12/51999 12/580 0/0
WEI-W189 20.05.2010 10:05:39 [Eis32] Preparing hard disks.
WEI-W189 20.05.2010 10:05:38 [Eis32] Target device for OS-Installation: /dev/sda
WEI-W189 20.05.2010 10:05:38 [Eis32] TCP/IP address: DHCP
WEI-W189 20.05.2010 10:05:38 [Eis32] Domain/Workgroup: Dom: PA
WEI-W189 20.05.2010 10:05:38 [Eis32] Computer name: WEI-W189
WEI-W189 20.05.2010 10:05:38 [Eis32] Image name: win7 x86 PRO DE SP0
Hat jemand von euch den evtl. eine Idee woran das liegen könnte?
Wenn mir jemand, der vielleicht eine ähnliche Situation hat (selber Rechner, selbes Betriebssystem) mal sagen kann mit welchem Bootimage und welchem Vorgehen er das gelöst hat wäre ich auch sehr dankbar.
Mfg Patrick
Windows 7 auf Client Installieren
Moderator: jknoth
Re: Windows 7 auf Client Installieren
hallo,
welche IMAGEX Version wurde eingebunden ? Wo wurden die Sourcen importiert, EMC auf Admin Workstation oder direkt am Server?
cYa
welche IMAGEX Version wurde eingebunden ? Wo wurden die Sourcen importiert, EMC auf Admin Workstation oder direkt am Server?
EPE findet die Sourcen wohl nicht.... daher vermute ich eins der obrigen ProblemeWEI-W189 20.05.2010 10:05:51 [Eis32] Error No: 110 Copy of Operating System files failed!
cYa
Thomas Hahn
Technical Account Manager
Matrix42 AG
Email: thomas.hahn[at]matrix42.com
http://www.matrix42.de
Skype: thahn42
ICQ: IO25IGO8
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.
Technical Account Manager
Matrix42 AG
Email: thomas.hahn[at]matrix42.com
http://www.matrix42.de
Skype: thahn42
ICQ: IO25IGO8
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of matrix42 AG.
Re: Windows 7 auf Client Installieren
Hallo,
also ich habe die CD im File Format hinterlegt und dann über die EMC auf dem Server selbst importiert.
Sprich ich habe das ISO File von WIndows 7 entpackt und in der EMC dann den Ordner als Source angegeben.
Mfg Patrick
also ich habe die CD im File Format hinterlegt und dann über die EMC auf dem Server selbst importiert.
Sprich ich habe das ISO File von WIndows 7 entpackt und in der EMC dann den Ordner als Source angegeben.
Mfg Patrick
Re: Windows 7 auf Client Installieren
Wichtig wäre hier zu wissen, mit welchem angemeldeten Benutzer das Win7 importiert wurde und welches ImageX verwendet wurde. Was hat den Empirum Server für ein Betriebssystem ? Bei 2008 ist zb. Admin nicht unbedingt gleich Admin. 
Re: Windows 7 auf Client Installieren
Hallo und danke mal für die schnelle Antwort.
Das Betriebssystem ist Windows Server 2003 R2 und der Benutzer ist ein Domänenadmin (sicher).
Was ist den mit IMAGEX genau gemeint?
Das Betriebssystem ist Windows Server 2003 R2 und der Benutzer ist ein Domänenadmin (sicher).
Was ist den mit IMAGEX genau gemeint?
Re: Windows 7 auf Client Installieren
Das ist ImageX:
http://technet.microsoft.com/de-de/libr ... S.10).aspx
Es muss für die Installation von Windows 7 auch über die EMC importiert werden. Das findest du unter "Sonstiges\WAIK".
Die OS-Files liegen auch wirklich unter dem angegeben Pfad: "WEI-VSEMP04 win7/x86/PRO/0/DE" ?
http://technet.microsoft.com/de-de/libr ... S.10).aspx
Es muss für die Installation von Windows 7 auch über die EMC importiert werden. Das findest du unter "Sonstiges\WAIK".
Die OS-Files liegen auch wirklich unter dem angegeben Pfad: "WEI-VSEMP04 win7/x86/PRO/0/DE" ?
Who is online
Users browsing this forum: No registered users and 9 guests