User Forum

Hallo zusammen,

ich habe folgendes Problem mit einem Dell T7500 in England:
PXE Installation läuft durch, beim ersten Reboot erhalte ich einen Bluescreen.
STOP....07B
Dürfte Bootdevice sein...


-V12P2
-EPE 2.79
-Eis32 12.0.0.9

Was kann ich machen? Hat jemand einen Typ? Workaround?


Gruß
haku

Hi,

Wir haben zwar nur ein paar kleine Brüder T3500, mit standard OnBoard Controller, aber die Dinger laufen genauso wenig.
Obwohl es eigentlich auch blos ein Intel ICH10R ist... Vermutlich hat Dell etwas an den Vendor und Device ID's gedreht und deshalb erkennt das EPE den Controller nicht.

Welchen Storage-Controller habt ihr im Einsatz? Möglicherweise kannst nur die Maschine einpacken und zu Matrix42 schicken.

Servus
Bernhard

Eventuell haben diese Rechner einen SAS Controller?

Bitte mal das SPY File des Rechners posten.

Die T7500 haben einen SAS Controller.
Man sieht nur das er den ICH10R.. nimmt im PXE Log.

Anbei der entsprechende Spyfile.

liegt das Problem am EPE oder am BetriebsytemTemplate ?

Gruß
haku

Guten morgen. Posten Sie bitte den inhalt des SPY Files.

Spyfile Inhalt

NIC]
MAC=B8AC6F36E5B1
Name=NetXtreme 57xx Gigabit Controller
VendorID=5348
DeviceID=5761
SubVendorID=4136
SubDeviceID=621

[NIC_1]
Name=NetXtreme 57xx Gigabit Controller
VendorID=5348
DeviceID=5761
SubVendorID=4136
SubDeviceID=621
HardwareID=PCI\VEN_14E4&DEV_1681
HardwareIDLong=PCI\VEN_14E4&DEV_1681&SUBSYS_026D1028
MAC=B8AC6F36E5B1

[STO_1]
VendorID=32902
DeviceID=14882
SubVendorID=4136
SubDeviceID=621
HardwareID=PCI\VEN_8086&DEV_3A22
HardwareIDLong=PCI\VEN_8086&DEV_3A22&SUBSYS_026D1028
ClassName=SATA

[STO_2]
VendorID=4096
DeviceID=88
SubVendorID=4136
SubDeviceID=541
HardwareID=PCI\VEN_1000&DEV_0058
HardwareIDLong=PCI\VEN_1000&DEV_0058&SUBSYS_021D1028
ClassName=SCSI

[VGA]
VendorID=4318
DeviceID=1592
SubVendorID=4318
SubDeviceID=1580
HardwareID=PCI\VEN_10DE&DEV_0638
HardwareIDLong=PCI\VEN_10DE&DEV_0638&SUBSYS_062C10DE

[HWID]
MachineIdOld=15854
MachineIdSub=66831
MachineIdAdd=78651
MachineIdNum=78651_66831

[PartitionDISK0]
DiskSizeCHS=488386584
DiskSizeLBA=
Cylinder=60801
Heads=255
Sectors=63

Danach kommt der Bluescreen.
PXE LOG.

xx 22.07.2010 16:01:45 [Eis32] Performing reboot.
xx 22.07.2010 16:01:45 [Eis32] Total elapsed time: 8 min
xx 22.07.2010 16:00:42 [Eis32] Preparing windows text mode startup
xx 22.07.2010 16:00:32 [Eis32] Starting Winnt.exe emulation for architecture x86
xx 22.07.2010 16:00:32 [Eis32] Total elapsed time: 6 min
xx 22.07.2010 16:00:13 [Eis32] Storage Driver Select: Intel(R) ICH10R SATA AHCI Controller
xx 22.07.2010 16:00:10 [Eis32] File copy process successful.
xx 22.07.2010 16:00:09 [Eis32] Total elapsed time: 6 min
xx 22.07.2010 15:55:23 [Eis32] Transferring OS sources from: xx WinXP/x86/PRO/3/US
xx 22.07.2010 15:55:23 [Eis32] Copying installation files.
xx 22.07.2010 15:55:23 [Eis32] Total elapsed time: 0 min
xx 22.07.2010 15:55:22 [Eis32] Applying additional custom registry settings...
xx 22.07.2010 15:55:22 [Eis32] Precision T7500 (Custom) identified!
xx 22.07.2010 15:55:22 [Eis32] New PxeSpy/Hardware-Wizard class profile available: 78651_66831.spy
xx 22.07.2010 15:55:22 [Eis32] Sound Adapter : No Sound Adapter detected!
xx 22.07.2010 15:55:21 [Eis32] Sound Adapter : No PCI-Sound Adapter detected!
xx 22.07.2010 15:55:21 [Eis32] Display Adapter: unknown-VGA-4318-1592-4318-1580
xx 22.07.2010 15:55:21 [Eis32] Storage Adapter: SCSI detected with: 4096-88-4136-541
xx 22.07.2010 15:55:20 [Eis32] Storage Adapter: SATA detected with: 32902-14882-4136-621
xx 22.07.2010 15:55:20 [Eis32] Network Adapter: NetXtreme 57xx Gigabit Controller
xx 22.07.2010 15:55:20 [Eis32] Performing hardware detection...
xx 22.07.2010 15:55:19 [Eis32] Total elapsed time: 0 min
xx 22.07.2010 15:55:19 [Eis32] Hard disk formating/partitioning successful.
xx 22.07.2010 15:55:19 [Eis32] Disk: 0 MB: 476940 parttypes/MB: 12/4996 0/0 0/0 0/0
xx 22.07.2010 15:55:18 [Eis32] Creating partitions.
xx 22.07.2010 15:55:18 [Eis32] Disk: 0 MB: 476940 parttypes/MB: 0/0 0/0 0/0 0/0
xx 22.07.2010 15:55:18 [Eis32] Deleting partitions.
xx 22.07.2010 15:55:17 [Eis32] Disk: 0 MB: 476940 parttypes/MB: 12/4996 0/0 0/0 0/0
xx 22.07.2010 15:55:17 [Eis32] Preparing hard disks.
xx 22.07.2010 15:55:17 [Eis32] Target device for OS-Installation: /dev/sda
xx 22.07.2010 15:55:16 [Eis32] TCP/IP address: DHCP
xx 22.07.2010 15:55:16 [Eis32] Domain/Workgroup: Dom: global
xx 22.07.2010 15:55:16 [Eis32] Computer name: xx
xx 22.07.2010 15:55:15 [Eis32] Image name: WinXP x86 PRO US SP3 / IE700
xx 22.07.2010 15:55:15 [Eis32] Total elapsed time: 0 min
xx 22.07.2010 15:55:15 [Eis32] Connected Empirumserver: xx IP: 172.25.56.9
xx 22.07.2010 15:55:15 [Eis32] Current client mac address: B8AC6F36E5B1 IP: 172.25.56.86
xx 22.07.2010 15:55:15 [Eis32] Empirum OS-Installation script Ver. 01.45
xx 22.07.2010 15:55:14 [Eis32] Empirum Eis32 Ver. 12.0.0.9
xx 22.07.2010 15:55:14 [Prepare_Windows] Starting EIS
xx 22.07.2010 15:55:14 [Prepare_Windows] no custom script found
xx 22.07.2010 15:55:13 [Prepare_Windows] executing custom preparation-script
xx 22.07.2010 15:55:13 [Prepare_Windows] is coming up
xx 22.07.2010 15:55:13 [seldest] analyzing data in /proc
xx 22.07.2010 15:55:13 [seldest] entering runlevel
xx 22.07.2010 15:55:12 [getimage] creating osinst.eis
xx 22.07.2010 15:55:12 [getimage] entering runlevel
xx 22.07.2010 15:55:12 [getconfig] WinXP is choosen to be installed
xx 22.07.2010 15:55:11 [getconfig] copying additional config - Files
xx 22.07.2010 15:55:11 [getconfig] Variable SYSfromLOCAL in EIS.INI is set to never
xx 22.07.2010 15:55:11 [getconfig] Variable SYSfromLOCAL in OS.INI is empty
xx 22.07.2010 15:55:10 [getconfig] Copying latest OS.INI from /mounts/EmpInst/Wizard/OS/Auto/6F36E5B1/OS.INI
xx 22.07.2010 15:55:10 [getconfig] trying to get OS.INI for 366FACB8
xx 22.07.2010 15:55:10 [getconfig] trying to get OS.INI for 6F36E5B1
xx 22.07.2010 15:55:10 [getconfig] entering runlevel
xx 22.07.2010 15:55:09 [raidsetup] searching for softwareraids
xx 22.07.2010 15:55:09 [raidsetup] entering runlevel
xx 22.07.2010 15:55:09 [logon] Connection to the Empirum-Server successfully established
xx 22.07.2010 15:55:09 [sshd] ssh-daemon succsessfully set up
xx 22.07.2010 15:55:09 [sshd] starting ssh server
xx 22.07.2010 15:55:08 [sshd] generating ssh host keys finished
xx 22.07.2010 15:55:08 [sshd ] generating ssh host keys
xx 22.07.2010 15:55:08 [buildpxecmd ] creating PXE-Command
xx 22.07.2010 15:55:08 [sshd ] entering runlevel
xx 22.07.2010 15:55:08 [networking ] You can connect to observe the Client's state by browsing to http://xx
xx 22.07.2010 15:55:07 [networking ] using it's HW-Address as B8AC6F36E5B1
xx 22.07.2010 15:55:07 [networking ] primary interface is up and running
xx 22.07.2010 15:55:07 [networking ] eth0 is selected as primary interface
xx 22.07.2010 15:55:07 [networking ] client IP is xx
xx 22.07.2010 15:55:07 [networking ] DHCP options EmpInstUser, EmpInstPW, EmpUser and EmpPW are empty.
xx 22.07.2010 15:55:06 [networking ] Defined DHCP option 'EMPIRUMSERVER' not found in section client in local disk.ini! - It will be set as environment variable.
xx 22.07.2010 15:55:06 [networking ] waiting for the interface to be configured
xx 22.07.2010 15:55:06 [networking ] DHCP Option to request: name: EmpSrvLong code: 132
xx 22.07.2010 15:55:06 [networking ] DHCP Option to request: name: EmpirumServer code: 128
xx 22.07.2010 15:55:06 [networking ] Variable USEDHCPOPTIONS is set in disk.ini
xx 22.07.2010 15:55:05 [networking ] Linked interfaces: eth0
xx 22.07.2010 15:55:05 [networking ] Carrier for eth0: Detected
xx 22.07.2010 15:55:05 [networking ] eth0 is up
xx 22.07.2010 15:55:05 [networking ] Checking for network device activations
xx 22.07.2010 15:55:04 [networking ] Module: tg3 already loaded => skipping it!
xx 22.07.2010 15:55:04 [networking ] Loading alternative module(s) for NICs into running kernel
xx 22.07.2010 15:55:04 [logon] mounting EMPINST$ and CONFIGURATOR$
xx 22.07.2010 15:55:04 [networking ] entering runlevel
xx 22.07.2010 15:55:03 [epelog ] Empty mount point. Logs are saved local as /tmp/
xx 22.07.2010 15:55:03 [mountusb ] Could not mount any USB devices
xx 22.07.2010 15:55:03 [epelog ] EPE will automatically continue with the detection in 10 seconds
xx 22.07.2010 15:55:03 [epelog ] Optionally insert a USB device now. SPY and log will be copied
xx 22.07.2010 15:55:02 [modsetup ] Network Adapter: 0x000014e4-0x00001681-0xffffffff-0xffffffff
xx 22.07.2010 15:55:02 [modsetup ] Storage Adapter: 0x00001000-0x00000058-0xffffffff-0xffffffff
xx 22.07.2010 15:55:02 [logon] entering runlevel
xx 22.07.2010 15:55:02 [modsetup ] Storage Adapter: 0x00008086-0x00003a22-0xffffffff-0xffffffff
xx 22.07.2010 15:55:01 [modsetup ] installing Driver dm-mirror
xx 22.07.2010 15:55:01 [modsetup ] installing Driver dm-bbr
xx 22.07.2010 15:55:01 [modsetup ] installing Driver dm-zero
xx 22.07.2010 15:55:01 [modsetup ] installing Driver dm-log
xx 22.07.2010 15:55:01 [buildpxecmd] the following options are passed to msgpxe: -m:B8AC6F36E5B1 -h:xx
xx 22.07.2010 15:55:00 [sshd ] generating ssh host keys
xx 22.07.2010 15:55:00 [modsetup ] installing Driver dm-mod
xx 22.07.2010 15:55:00 [buildpxecmd ] creating PXE-Command

Ich vermute mal Sie wollen XP installieren.

Dann benötigen Sie folgende Treiber:

Dell SAS 5x and SAS 6x Controller Driver (Windows XP 32-bit)
oder
Dell SAS 5x and SAS 6x Controller Driver (Windows XP x64)

Wenn man es richtig macht klappts auch.

SAS Treiber manuell integriert und funktioniert.

Danke


Gruß
haku

Die Beiden genannten Treiber gibt es schon oder hatten diese nicht gepasst?

Die haben leider nicht gepasst.
Ich habe für dieses Modell von DELL die Treiber eingebunden.