EPE Fehler "target device [...] cannot be detected"

Moderator: jknoth

Antworten
luca
Beiträge: 20
Registriert: 12. Feb 2013, 08:36
Kontaktdaten:

EPE Fehler "target device [...] cannot be detected"

Beitrag von luca » 22. Jan 2015, 09:16

Hallo zusammen,

wir haben vor kurzem die neuesten Patches installiert (V15.1 inkl. Patch 09) und versuchen jetzt neue Rechner zu installieren, bekommen aber immer folgenden Fehler:

21.01.2015 16:08:36 [Eis32] Error No: 407 (EisError 401) The target device for installation cannot be detected!

Ja, die PXE Images haben wir aktuallisiert (ID: version_3_002).
Ich kann ausschließen, dass es an defekten in der Hardware liegt, da wir es mit 3 baugleichen, ganz neuen Rechnern versucht haben. Ich kann leider nicht ausschließen, dass es an nicht unterschtützter Hardware liegt. Wir haben derzeit keine Rechner da, die wir mit der älteren Empirum Version erfolgreich aufgesetzt haben und neu installieren könnten.

Ein weiterer seltsamer Effekt ist, dass das Aussehen der EPE sich bei jedem Boot abwechselt. Entweder es sieht so aus wie zu Zeiten von Empirum v15.0 (links der Schritt [Treiber laden etc.] und in der Mitte die Lognachrichten) oder man sieht nur den mittleren Teil (nur die Lognachrichten auf grauem Hintergrund). Die zwei wechseln sich ab.

Im Anhang finden Sie / findet Ihr das EPE.log (IPs etc. habe ich entfernt).

Vielen Dank und Grüße
Luca

EDIT: .log scheint nicht erlaubt zu sein, hier also der Inhalt.

Begin time for EPE logging: Wed Jan 21 15:07:05 GMT 2015


Outputs of 'dmesg'
------------------------- DMESG --------------------

pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8cc6] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7d19000-0xf7d197ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7d18000-0xf7d180ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xc5cbd000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc65f8000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xd8de3000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd8edc000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x41ee00000-0x41fffffff]
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0800-0x087f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: [io 0x0a00-0x0a0f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:0b: [io 0x04d0-0x04d1] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 03-04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 28652K (f5e03000 - f79fe000)
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.22)
msgmni has been set to 1505
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xe0000000, mapped to 0xf8280000, using 3072k, total 65472k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 3ff0000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:17: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d1b000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
fujitsu_laptop: driver 0.6.0 successfully loaded
fujitsu_tablet: Unknown (using defaults)
msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI No-Shortcut mode
RAMDISK: gzip image found at block 0
usb 1-1: new high-speed USB device number 2 using ehci-pci
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing unused kernel memory: 420K (c1695000 - c16fe000)
random: minised urandom read with 1 bits of entropy available
tsc: Refined TSC clocksource calibration: 3399.996 MHz
Switched to clocksource tsc
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-6: new full-speed USB device number 2 using xhci_hcd
usb 3-6: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-6:1.0: USB hub found
hub 3-6:1.0: 4 ports detected
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 3-6.1: new low-speed USB device number 3 using xhci_hcd
usb 3-6.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-6.2: new low-speed USB device number 4 using xhci_hcd
usb 3-6.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-6.3: new low-speed USB device number 5 using xhci_hcd
usb 3-6.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-6.3: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
input: HID 046a:0011 as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.1/3-6.1:1.0/0003:046A:0011.0001/input/input7
hid-generic 0003:046A:0011.0001: input: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:14.0-6.1/input0
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.2/3-6.2:1.0/0003:046D:C050.0002/input/input8
hid-generic 0003:046D:C050.0002: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-6.2/input0
input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3/3-6.3:1.0/0003:10D5:55A4.0003/input/input9
hid-generic 0003:10D5:55A4.0003: input: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:14.0-6.3/input0
usbhid 3-6.3:1.1: couldn't find an input interrupt endpoint
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
SCSI subsystem initialized
usbcore: registered new interface driver usb-storage
waiting module removal not supported: please upgrade
usbcore: deregistering interface driver usb-storage
waiting module removal not supported: please upgrade
usbcore: registered new interface driver asix
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
input: PC Speaker as /devices/platform/pcspkr/input/input10
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xf844a000, 74:d4:35:ff:bf:ef, XID 0c900880 IRQ 18
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
SCSI subsystem initialized
ide-gd driver 1.18
SGI XFS with security attributes, large block/inode numbers, no debug enabled
NTFS driver 2.1.30 [Flags: R/O MODULE].
JFS: nTxBlock = 8192, nTxLock = 65536
Key type dns_resolver registered
NET: Registered protocol family 33
Key type rxrpc registered
Key type rxrpc_s registered
kAFS: Red Hat AFS client v0.1 registering.
async_tx: api initialized (async)
raid6: mmxx1 7185 MB/s
raid6: mmxx2 7308 MB/s
raid6: sse1x1 6069 MB/s
raid6: sse1x2 7556 MB/s
raid6: sse2x1 12258 MB/s
raid6: sse2x2 15425 MB/s
raid6: using algorithm sse2x2 (15425 MB/s)
raid6: using ssse3x1 recovery algorithm
xor: automatically using best checksumming function:
avx : 37146.000 MB/sec
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
md: raid10 personality registered for level 10
md: raid1 personality registered for level 1
device-mapper: raid: Loading target version 1.5.2
md: linear personality registered for level -1
device-mapper: multipath: version 1.6.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
---------------------- END DMESG ---------------------

Outputs of 'lsmod'
------------------------- LSMOD --------------------

Module Size Used by
dm_mirror 9355 0
dm_region_hash 5023 1 dm_mirror
raid0 6151 0
dm_thin_pool 34357 0
dm_bio_prison 2849 1 dm_thin_pool
multipath 4460 0
dm_snapshot 22484 0
dm_round_robin 1615 0
dm_multipath 11953 1 dm_round_robin
scsi_dh 3541 1 dm_multipath
linear 3023 0
dm_raid 13519 0
raid1 21288 1 dm_raid
dm_log 6300 2 dm_mirror,dm_region_hash
dm_persistent_data 33034 1 dm_thin_pool
dm_bufio 10391 2 dm_snapshot,dm_persistent_data
raid10 32738 1 dm_raid
dm_crypt 12144 0
dm_zero 783 0
dm_mod 56873 10 dm_mirror,dm_thin_pool,dm_snapshot,dm_multipath,dm_raid,dm_log,dm_persistent_data,dm_bufio,dm_crypt,dm_zero
raid456 48588 1 dm_raid
md_mod 81076 7 raid0,multipath,linear,dm_raid,raid1,raid10,raid456
async_pq 3104 1 raid456
async_xor 2217 2 raid456,async_pq
xor 17332 1 async_xor
async_memcpy 922 1 raid456
async_raid6_recov 865 1 raid456
raid6_pq 86536 2 async_pq,async_raid6_recov
async_tx 1298 5 raid456,async_pq,async_xor,async_memcpy,async_raid6_recov
cifs 205923 0
ncpfs 33933 0
minix 19791 0
udf 59407 0
crc_itu_t 1011 1 udf
kafs 61484 0
af_rxrpc 56826 3 kafs
dns_resolver 3144 1 kafs
jfs 126279 0
reiserfs 161875 0
configfs 15397 0
ntfs 70929 0
coda 21244 0
xfs 389786 0
exportfs 2555 1 xfs
crc32c 1092 1
libcrc32c 626 2 dm_persistent_data,xfs
msdos 4891 0
isofs 24157 0
ide_gd_mod 11953 0
sd_mod 23307 0
scsi_mod 106618 2 scsi_dh,sd_mod
r8169 42292 0
pcspkr 1251 0
xtkbd 1578 0
sunkbd 2769 0
newtonkbd 1410 0
sermouse 2454 0
edd 5384 0
asix 14827 0
libphy 15127 1 asix
usbnet 14564 1 asix
mii 2803 3 r8169,asix,usbnet
usbhid 26363 0
sl811_hcd 7559 0
isp116x_hcd 10521 0
---------------------- END LSMOD ---------------------

Outputs of 'lspci'
------------------------- lspci --------------------

00:00.0 Host bridge: Intel Corporation: Unknown device 0c00 (rev 06)
00:02.0 VGA compatible controller: Intel Corporation: Unknown device 0412 (rev 06)
00:03.0 Audio device: Intel Corporation: Unknown device 0c0c (rev 06)
00:14.0 USB Controller: Intel Corporation: Unknown device 8cb1
00:16.0 Communication controller: Intel Corporation: Unknown device 8cba
00:1a.0 USB Controller: Intel Corporation: Unknown device 8cad
00:1b.0 Audio device: Intel Corporation: Unknown device 8ca0
00:1c.0 PCI bridge: Intel Corporation: Unknown device 8c90 (rev d0)
00:1c.2 PCI bridge: Intel Corporation: Unknown device 8c94 (rev d0)
00:1c.3 PCI bridge: Intel Corporation: Unknown device 8c96 (rev d0)
00:1d.0 USB Controller: Intel Corporation: Unknown device 8ca6
00:1f.0 ISA bridge: Intel Corporation: Unknown device 8cc6
00:1f.2 SATA controller: Intel Corporation: Unknown device 8c82
00:1f.3 SMBus: Intel Corporation: Unknown device 8ca2
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
03:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41)
---------------------- END lspci ---------------------

Outputs of 'lspci -n'
------------------------- lspci -n --------------------

00:00.0 Class 0600: 8086:0c00 (rev 06)
00:02.0 Class 0300: 8086:0412 (rev 06)
00:03.0 Class 0403: 8086:0c0c (rev 06)
00:14.0 Class 0c03: 8086:8cb1
00:16.0 Class 0780: 8086:8cba
00:1a.0 Class 0c03: 8086:8cad
00:1b.0 Class 0403: 8086:8ca0
00:1c.0 Class 0604: 8086:8c90 (rev d0)
00:1c.2 Class 0604: 8086:8c94 (rev d0)
00:1c.3 Class 0604: 8086:8c96 (rev d0)
00:1d.0 Class 0c03: 8086:8ca6
00:1f.0 Class 0601: 8086:8cc6
00:1f.2 Class 0106: 8086:8c82
00:1f.3 Class 0c05: 8086:8ca2
02:00.0 Class 0200: 10ec:8168 (rev 06)
03:00.0 Class 0604: 8086:244e (rev 41)
---------------------- END lspci -n ---------------------

Content of '/proc/partitions'
------------------------- /proc/partitions --------------------

major minor #blocks name

---------------------- END /proc/partitions ---------------------

Content of '/proc/net/dev'
------------------------- /proc/net/dev --------------------

Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 9949124 4266 0 0 0 0 0 0 9949124 4266 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
---------------------- END /proc/net/dev ---------------------

Content of '/proc/cmdline'
------------------------- /proc/cmdline --------------------

BOOT_IMAGE=kernel ramdisk_size=328192 init=/bin/minit CONSOLE=/dev/tty1 vga=0x317 root=/dev/ram0 rw quiet irqpoll pci=nomsi EPE_LANGUAGE=ENU EPE_OSSEL=0 EPE_MBRID=05790CC-0000000-0000000-0000000 initrd=/initrd.gz
---------------------- END /proc/cmdline ---------------------

ls -l /lib/modules/
------------------------- /lib/modules/ --------------------

total 1
drwxr-xr-x 3 root root 1024 Jan 21 15:06 3.14.4-gentoo
---------------------- END /lib/modules/ ---------------------

uname -r
------------------------- uname -r --------------------

3.14.4-gentoo
---------------------- END uname -r ---------------------

Content of '/tmp/pcitable'
------------------------- /tmp/pcitable --------------------

"0x000010ec" "0x00008168" "0xffffffff" "0xffffffff" "r8169" "Empirum detected Network Interface Card"
---------------------- END /tmp/pcitable ---------------------

------------------------- Debug Messages --------------------
10 uncrypt Reading disk.ini...
0 uncrypt Decrypting ...
0 uncrypt Decryption completed successfully.
5 syslog Catching pending kernel messages...
10 boot msg_enter
0 boot Mounting /proc
0 boot Mounting /sys
5 boot Performing udev initial scan...
5 boot Making udev managing hotplug events...
0 boot Choosing network mode...
0 boot Network mode: dhcp
10 syslog Starting klogd...
10 syslog Starting syslogd...
0 boot Setting up modul dependencies...
0 boot Setting hostname.
0 boot Checking if CPU has 64Bit capability...
0 boot CPU has 64Bit capability.
0 boot Preparing modules...
0 boot Updating modules.conf...
0 boot loading usb modules
10 lo entering runlevel
1 lo Setting up loopback interface...
1 lo Loopback interface successfully set up.
10 httpd entering runlevel
10 startx entering runlevel
1 httpd Configuring .htaccess
0 startx Starting Tiny-X for framebuffer devices Xfbdev...
1 httpd htpassword successfully configured
1 httpd setting environment-variable $DESKTOP_DEST
1 httpd httpd starting httpd
0 startx Setting display variable...
0 startx Starting Browser...
10 startx Browser executed successfully.
10 modsetup entering runlevel
0 modsetup Preparing modules directory...
0 modsetup Removing usb_storage...
0 modsetup Loading USB Net driver asix
0 modsetup Loading edd support...
0 modsetup Loading input device driver...
0 modsetup Installing driver sermouse
0 modsetup Installing driver newtonkbd
0 modsetup Installing driver sunkbd
0 modsetup Installing driver xtkbd
0 modsetup Installing driver pcspkr
0 modsetup Installing IDE drivers...
0 modsetup Installing NIC drivers...
0 modsetup Installing SCSI drivers...
0 modsetup Loading scsi low level drivers...
0 modsetup Loading and inserting scsi disk driver...
0 modsetup Loading and inserting ide disk driver...
0 modsetup Loading fs-support...
0 modsetup Installing driver msdos
0 modsetup Installing driver xfs
0 modsetup Installing driver coda
0 modsetup Installing driver ntfs
0 modsetup Installing driver configfs
0 modsetup Installing driver reiserfs
0 modsetup Installing driver jfs
0 modsetup Installing driver exportfs
0 modsetup Installing driver kafs
0 modsetup Installing driver udf
0 modsetup Installing driver minix
0 modsetup Installing driver ncpfs
0 modsetup Installing driver cifs
0 modsetup Installing driver isofs
0 modsetup Loading raid and lvm...
0 modsetup Installing driver raid456
0 modsetup Installing driver dm-zero
0 modsetup Installing driver dm-crypt
0 modsetup Installing driver raid10
0 modsetup Installing driver dm-persistent-data
0 modsetup Installing driver dm-log
0 modsetup Installing driver dm-raid
0 modsetup Installing driver linear
0 modsetup Installing driver dm-round-robin
0 modsetup Installing driver md-mod
0 modsetup Installing driver dm-snapshot
0 modsetup Installing driver multipath
0 modsetup Installing driver dm-mod
0 modsetup Installing driver raid1
0 modsetup Installing driver dm-thin-pool
0 modsetup Installing driver raid0
0 modsetup Installing driver dm-region-hash
0 modsetup Installing driver dm-multipath
0 modsetup Installing driver dm-mirror
0 modsetup Installing driver dm-bio-prison
0 modsetup Installing driver dm-bufio
0 modsetup Network adapter: 0x000010ec-0x00008168-0xffffffff-0xffffffff
------------------------- End Debug Messages --------------------

------------------------- /etc/empirum_vars --------------------
EMP_PXECLIENT_DOTGATEWAY=""
EMP_PXECLIENT_DOTIP=""
EMP_PXECLIENT_DOTNETMASK=""
EMP_PXECLIENT_PXEUNICAST="1"
EMP_PXECLIENT_SERVICESERVERIP=""
EMP_MISC_INFOLEVEL="10"
EMP_MISC_PXEIMAGENAME="EPE2LV"
EMP_MISC_DISKTYP="EPE_AUTO"
EMP_MISC_MONITORING="YES"
EMP_MISC_DISKDIR="EPE2LV"
EMP_MISC_DEBUGLEVEL="10"
EMP_MISC_ISKERNELPARAMETER="NO"
EMP_MISC_ISOIMAGENAME="c:\temp\matrix42"
EMP_MISC_DISKBOOTLANGUAGE="de-DE"
EMP_MISC_DISKBOOTTEMPLATE="Empirum"
EMP_MISC_PE2="PE2"
EMP_MISC_LATEST="Latest"
EMP_MISC_VERSION="Version"
EMP_MISC_OSSELECT="auto"
EMP_MISC_OSSELECTN="1"
EMP_MISC_DISKVER="1"
EMP_MISC_UPDATE="NO"
EMP_MISC_KERNELPARAMETER="ramdisk_size=328192"
EMP_MISC_INIT="/bin/minit"
EMP_MISC_CONSOLE="/dev/tty1"
EMP_MISC_VGA="0x317"
EMP_MISC_ROOT="/dev/ram0"
EMP_MISC_RW="rw"
EMP_MISC_QUIET="quiet"
EMP_MISC_IRQPOLL="irqpoll"
EMP_MISC_PCI="nomsi"
EMP_EMPINSTALLER_DATE="21.01.2015"
EMP_EMPINSTALLER_15:03="15:03"
EMP_EMPINSTALLER_PRODUCTVERSION="15.1.1"
EMP_EMPINSTALLER_PXEVERSION="66"
EMP_CLIENT_SUBNETMASK=""
EMP_CLIENT_SERVERIP="###.###.###.###"
EMP_CLIENT_IPADDRESS=""
EMP_CLIENT_DISABLEDHCP="0"
EMP_CLIENT_DEFAULTGATEWAY=""
EMP_CLIENT_DOMPDCIP="###.###.###.###"
EMP_CLIENT_SAVEUSER="1"
EMP_CLIENT_SHARECONFIGURATOR="CONFIGURATOR$"
EMP_CLIENT_USER="administrator"
EMP_CLIENT_FTP_USER=""
EMP_CLIENT_DOMPDC="----------------------"
EMP_CLIENT_SHARE="EMPINST$"
EMP_CLIENT_EMPSRVFQDN="-----------------------"
EMP_CLIENT_CLIENTTYPE="LINUX"
EMP_CLIENT_DNSSERVER="###.###.###.###"
EMP_CLIENT_LOGONDOMAIN="local"
EMP_CLIENT_SERVER="---------------"
EMP_CLIENT_USEDHCPOPTIONS=""
EMP_CLIENT_EMPSRVLONG="------------------------"
EMP_CLIENT_USEDHCPOPTIONSB="NO"
EMP_CLIENT_PASSWORD="--------------------"
EMP_CLIENT_LOGONTODOMAIN="YES"
EMP_CLIENT_FTP_PASSWORD="----------------------"
EPE_LANGUAGE=ENU
EPE_OSSEL=0
EPE_MBRID=05790CC-0000000-0000000-0000000
------------------------- End /etc/empirum_vars --------------------

------------------------- /etc/profile --------------------
export PS1="Client # "

alias la="ls -la"

export PATH=$PATH:/bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin

export HOME=/root


export localout=/dev/tty1

export LANGEXT=enu
export CPU_ARCH=x64
export LANGUAGE=ENU
export OSSEL=0
export MBRID=05790CC-0000000-0000000-0000000
export DESKTOP_DEST=/var/www/data/select/empirum.html
export DESKTOP_SELECT=/var/www/data/empirumsrcselect.html
export DESKTOP_PROMPT_INF=/var/www/data/select/cgi-bin/prompt.inf
export DISPLAY=127.0.0.1:0.0
------------------------- End /etc/profile --------------------

------------------------- EPE_Info.txt --------------------
OCT v3.04 Datum: 25.02.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 28.01.2011
empirum.pcimap 25.03.2010

Bugfix: PRB22115: Added new driver "hpsa" for HP Smart Arrays
Modified: KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.05 Datum: 01.03.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 01.03.2011
empirum.pcimap 25.03.2010

Bugfix: 18880: Handling of special characters (\ $ ?) in passwords
Modified: initrd: /bin/functions.sh
-------------------------------------------------------------------------------
OCT v3.06 Datum: 14.03.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 14.03.2011
empirum.pcimap 25.03.2010

Bugfix: 20135: Reading of configfile from TFTP-Cache
Modified: initrd: /bin/functions.sh
-------------------------------------------------------------------------------
OCT v3.07 Datum: 17.03.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 17.03.2011
empirum.pcimap 25.03.2010

Bugfix: 20076: Replace also PXE-ServerIP (if EmpirumServer=PXE-Server) if EmpSRVLong from configuration
should be replace via DHCP-Options or configfile in TFTP-Root
Modified: initrd: /bin/functions.sh, buildpxecmd
-------------------------------------------------------------------------------
OCT v3.08 Datum: 11.04.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 11.04.2011
empirum.pcimap 25.03.2010

Bugfix: 21603: Variables from the CFG-File from BMC should be read before.
Modified: initrd: runlevel network
-------------------------------------------------------------------------------
OCT v3.09 Datum: 20.04.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 20.04.2011
empirum.pcimap 25.03.2010

Bugfix: 21598: Do not abort if unattend.xml file for vista+ not found on server
Modified: initrd: runlevel getconfig
-------------------------------------------------------------------------------
OCT v3.10 Datum: 07.06.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 07.06.2011
empirum.pcimap 25.03.2010

Bugfix: 20955: Added reports for executed GetHostByName
Modified: initrd: runlevel buildpxecmd
-------------------------------------------------------------------------------
OCT v3.11 Datum: 08.06.2011
Contents: KERNEL 25.02.2011
modules.tgz 25.02.2011
initrd 08.06.2011
empirum.pcimap 25.03.2010

Bugfix: 17726: Added reports about mount errors
Modified: initrd: runlevel logon
-------------------------------------------------------------------------------
OCT v3.12 Datum: 15.06.2011
Contents: KERNEL 15.06.2011
modules.tgz 15.06.2011
initrd 08.06.2011
empirum.pcimap 25.03.2010

Bugfix: 22992: Kernel-Update to 2.6.39-gentoo-r1
Modified: KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.13 Datum: 15.07.2011
Contents: KERNEL 15.06.2011
modules.tgz 15.06.2011
initrd 15.07.2011
empirum.pcimap 25.03.2010

Bugfix: 23155: Fallback to IP-based mount, on mount fail. Get SERVERIP via gethostbyName if it is not specified
Modified: initrd --> logon, functions.sh
-------------------------------------------------------------------------------
OCT v3.14 Datum: 22.07.2011
Contents: KERNEL 22.07.2011
modules.tgz 22.07.2011
initrd 22.07.2011
empirum.pcimap 25.03.2010

Bugfix: 23713: Kernel-Update to 2.6.39-gentoo-r3 + New Mount-option 'direct' to solve read/write problems on mount points
Modified: KERNEL, modules.tgz and logon
-------------------------------------------------------------------------------
OCT v3.15 Datum: 29.07.2011
Contents: KERNEL 29.07.2011
modules.tgz 29.07.2011
initrd 22.07.2011
empirum.pcimap 25.03.2010

Bugfix 21845: Kernel-Update to 3.0.0-gentoo
Modified: KERNEL, modules.tgz
-------------------------------------------------------------------------------
OCT v3.16 Datum: 05.08.2011
Contents: KERNEL 29.07.2011
modules.tgz 05.08.2011
initrd 22.07.2011
empirum.pcimap 25.03.2010

Bugfix 23713: Build of vendor driver e1000e into current kernel 3.0.0-gentoo
Modified: modules.tgz
-------------------------------------------------------------------------------
OCT v3.17 Datum: 23.08.2011
Contents: KERNEL 23.08.2011
modules.tgz 23.08.2011
initrd 22.07.2011
empirum.pcimap 25.03.2010

Bugfix 24687: Added new versions of firmwares for NIC drivers like bnx2 and bnx2x
Modified: KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.18 Datum: 14.10.2011
Contents: KERNEL 14.10.2011
modules.tgz 14.10.2011
initrd 22.07.2011
empirum.pcimap 25.03.2010

Bugfix 25749: Kernel-Update to 3.0.6-gentoo, Intel-driver e1000e implemented and bnx2-firmwares updated
Modified: KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.19 Datum: 14.10.2011
Contents: KERNEL 14.10.2011
modules.tgz 14.10.2011
initrd 14.10.2011
empirum.pcimap 25.03.2010

Bugfix 25198: If EmpSRVLONG as DHCP-Option is empty, do not try to use it to set Server and FQDN
Modified: initrd -> /bin/functions.sh
-------------------------------------------------------------------------------
OCT v3.20 Datum: 11.11.2011
Contents: KERNEL 14.10.2011
modules.tgz 14.10.2011
initrd 11.11.2011
empirum.pcimap 25.03.2010

Bugfix 25198: Do not set SERVERIP to empty string if EmpSrvLong is empty or only a hostname
Do not try to set ServerIP to /etc/hosts if ServerIP is empty
Modified: initrd -> /bin/functions.sh, runlevel network
-------------------------------------------------------------------------------
OCT v3.21 - 01.079 Date: 06.01.2012
Bugfix 26339: Empty custom.pcimap removed from download folder, so customer version
of this file will not be replaced anymore
Modification: Download folder for FTP
-------------------------------------------------------------------------------
OCT v3.22 - 01.080 Date: 16.01.2012
Bugfix 26456: Kernel-Update to 3.2.1-gentoo
Modification: KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.23 - 01.081 Date: 07.02.2012
Bugfix 26970: 1) New kernel parameter EPE_DHCPCONF created. If it is 0 the dhclient.conf will not be
created on runtime of EPE client. -> Bugfix for DEVK
2) Picked up network script and added some messages
Modification: initrd -> network
-------------------------------------------------------------------------------
OCT v3.24 - 01.082 Date: 08.02.2012
Bugfix 27283: Added firmwares for NIC drivers
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
OCT v3.25 - 01.083 Date: 10.02.2012
Bugfix 21119: Added new entry to empirum.pcimap
Modification: empirum.pcimap
-------------------------------------------------------------------------------
OCT v3.26 - 01.084 Date: 17.02.2012
Bugfix 27454: Added new USB-To-Ethernet driver smsc75xx
To load this driver it must be set following kernel parameter EPE_LOAD_MODULES=smsc75xx
because it does not be added to modules.pcimap
Modification: KERNEL, modules.tgz and empirum.pcimap
-------------------------------------------------------------------------------
OCT v3.27 - 01.085 Date: 29.02.2012
Bugfix 27388: KernelUpdate to 3.2.6-gentoo and added "Support of Multiable CPUs" to expand the count of interrupts
Modification: KERNEL, modules.tgz
-------------------------------------------------------------------------------
OCT v3.28 - 01.086 Date: 01.03.2012
Bugfix DEVK: Build of vendor driver e1000e into current kernel 3.2.6-gentoo
Modification: KERNEL, modules.tgz
-------------------------------------------------------------------------------
OCT v3.29 - 01.087 Date: 02.03.2012
Bugfix 27594: Escape all characters (inclusively special characters) in password so that can be read from environment (for EIS)
Modification: initrd --> /bin/functions.sh --> read_and_allocate_options
-------------------------------------------------------------------------------
v3.30 - 01.088 Date: 08.03.2012, OCT
Bugfix 27859: Sort found linked interfaces to begin scanning with eth0
Modification: initrd --> /bin/functions.sh --> load_alternative_modules_and_get_linked_interfaces
-------------------------------------------------------------------------------
v3.31 - 01.089 Date: 09.03.2012, OCT
Bugfix 27365: KernelUpdate to 3.2.9-gentoo and added "Xen Guest support" to install VMs on XenServer
Modification: initrd --> /bin/functions.sh --> read_and_allocate_options
KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.32 - 01.090 Date: 11.05.2012, OCT
Bugfix 28870: KernelUpdate to 3.3.4-gentoo, patch for driver forcedeth, e1000e replaced with vendor driver
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.33 - 01.091 Date: 24.05.2012, OCT
Bugfix 29016: All scripts in runlevel prepare are collected in only one, so we have not to enhance EPE for new OS types any more
Modification: initrd --> all scripts in runlevel prepare
-------------------------------------------------------------------------------
v3.34 - 01.092 Date: 22.06.2012, OCT
Bugfix 29221: Kernel update to 3.4.3-gentoo with patch of forcedeth driver, NIC firmwares,
new driver 'alx' and with vendor driver 'e1000e'
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.35 - 01.093 Date: 25.06.2012, OCT
Bugfix XXXXX: Activated "ATA support for libsas" in Kernel to support SAS disks (DevID=1d6b and 1d02)
in machines from Fujitsu Celsius
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.36 - 01.094 Date: 17.07.2012, OCT
Task 29896: EPE must not check OS type anymore. Runlevel getconfig and getimage revised
Modification: initrd
-------------------------------------------------------------------------------
v3.37 - 01.095 Date: 25.07.2012, OCT
Bugfix 29973: Don´t use mount options "nounix,noserverino" if Kernelparameter EPE_DONOTSETMOUNTOPTIONS=1 is set
Neccessary for FreeBSD FileShares
Modification: initrd -> runlevel logon
-------------------------------------------------------------------------------
v3.38 - 01.096 Date: 27.07.2012, OCT
Bugfix 30012: Added USB3.0 support into the current kernel
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.39 - 01.097 Date: 03.08.2012, OCT
Bugfix 30012: Load USB3.0 driver xhci-hcd explicitly to runtime
Modification: initrd --> runlevel boot
-------------------------------------------------------------------------------
v3.40 - 01.098 Date: 08.08.2012, OCT
Bugfix 30272: Variable MISC -> OS from disk.ini must be convert to upper case to avoid
problems with case-sensivity
Modification: initrd --> runlevel getimage
-------------------------------------------------------------------------------
v3.41 - 02.000 Date: 24.08.2012, OCT
Bugfix 30629: KernelUpdate to 3.5.2-gentoo (contains drivers alx, e1000e from vendors, patch for driver forcedeth and NIC firmwares)
Modification: KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.42 - 02.001 Date: 27.08.2012, OCT
Bugfix 30677: Rebranding EPE -> new gifs added for EPE client
Modification: initrd --> /var/www/data/ --> new gifs
-------------------------------------------------------------------------------
v3.43 - 02.002 Date: 10.09.2012, OCT
Bugfix 30944: - Added some CIFS attributes like "Support legacy servers which use weaker LANMAN security"
- Deprecated mount option 'direct' replaced with cache=none
Modification: initrd, KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.44 - 02.003 Date: 18.09.2012, OCT
Bugfix 30775: Update of 'dmraid' and 'device-mapper' to support new SWRAID controller
Modification: initrd
-------------------------------------------------------------------------------
v3.45 - 02.004 Date: 19.09.2012, OCT
Bugfix 29191: Handle new dhcp option SERVICESERVERIP to avoid use of PXEImgChange.exe
Modification: initrd
-------------------------------------------------------------------------------
v3.46 - 02.005 Date: 02.10.2012, OCT
Bugfix 30775: Undo unneeded changes for 'dmraid' and 'device-mapper' to support new SWRAID controller
Modification: initrd
-------------------------------------------------------------------------------
v3.47 - 02.006 Date: 02.10.2012, OCT
Bugfix 31233: EPE Localization fixes
Modification: initrd -> startx
-------------------------------------------------------------------------------
v3.48 - 02.007 Date: 12.10.2012, OCT
Bugfix 31363: Missing driver 'alx' because of build failures
Modification: KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.49 - 02.008 Date: 15.10.2012, OCT
Bugfix 31116: EndOfLife was failed because of missing OS type
Modification: initrd --> getconfig & getimage
-------------------------------------------------------------------------------
v3.50 - 02.009 Date: 17.10.2012, OCT
Bugfix 31502: Added convenient message if Scripts2 directory on Empirum server is missing
Modification: initrd --> getimage
-------------------------------------------------------------------------------
v3.51 - 02.010 Date: 30.10.2012, OCT
Bugfix 31630: Syntax error in message
Modification: initrd --> getimage
-------------------------------------------------------------------------------
v3.52 - 02.011 Date: 05.11.2012, OCT
Bugfix 31618: Kernel update to linux-3.6.4-gentoo --> support of new ASIX USB Net driver
Modification: KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.53 - 02.012 Date: 09.11.2012, OCT
Bugfix 31640: Load ASIX USB Net driver automatically in runlevel modsetup
Modification: initrd
-------------------------------------------------------------------------------
v3.54 - 02.013 Date: 30.11.2012, OCT
Bugfix 31936: Reload the 3com driver 3c59x - It is needed for 3C905C TX/TX-M card
Modification: initrd --> network
-------------------------------------------------------------------------------
v3.55 - 02.014 Date: 25.01.2013, OCT
Bugfix 32533: PRB24978: igb driver patched + Kernel update to 3.7.2-gentoo
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.56 - 02.015 Date: 15.02.2013, OCT
Bugfix 32743: Kernel update to 3.7.7-gentoo with patches for forcedeth, igb and alx drivers
Modification: KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.57 - 02.016 Date: 27.02.2013, FLL
Bugfix 32743: PRB24990: Windows 7 Installation with 2 RAIDs
Modification: initrd --> create /bin/raidsetupex.sh
-------------------------------------------------------------------------------
v3.58 - 02.017 Date: 10.06.2013, OCT
Bugfix 34121: PRB25301: Added new driver RTL8152B USB Nic for Panasonic FZ-G1 for customer - CUSTOMER VERSION
---
Hint: Not implemented into the product because the driver will be added into
the linux kernel in version 3.10
---
Modification: modules.tgz
-------------------------------------------------------------------------------
v3.59 - 02.018 Date: 14.06.2013, OCT
Bugfix 34085: KernelUpdate to 3.9.5-gentoo with r8152 and alx module from
vendors and patched igb and forcedeth modules
Modification: KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.60 - 02.019 Date: 30.08.2013, OCT
Bugfix 35156,35157: - KernelUpdate to 3.10.7-gentoo with r8152 and alx module from vendors
and patched igb and forcedeth modules
- New kernel parameter EPE_SWRAIDTYPE
Modification: initrd, KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.61 - 02.020 Date: 19.05.2014, ESC
EFI Firmware Support: - EFI Firmware Support activated
- SGdisk integrated
- KernelUpdate to 3.14.4-gentoo
- Multiple USB NIC Adapter Drivers added
Modification: initrd, KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.62 - 02.021 Date: 03.06.2014, OCT
Bugfix 38462 & 38464: - USB module ehci-pci will now be loaded additional to the default usb modules
to handle USB ports on HWs like Dell Optiplex 790 or ThinkPad from Lenovo.
Without this fix you cannot use USB keyboards during the EPE phase
-> No keyboard -> No Selfprovisioning!
- Added OS variable for WIN8(.1) support to runlevel getimage
(fixed custom script including issue)
Modification: initrd -> /etc/minit/boot/run2
-------------------------------------------------------------------------------
v3.63 - 02.022 Date: 08.07.2014, OCT
Bugfix 38690 : Added OS variable for WIN8(.1) support to runlevel getimage
(fixed custom script including issue)
Modification: initrd -> /etc/minit/getimage/run2
------------------------------------------------------------------------------
v3.64 - 02.023 Date: 01.09.2014, OCT
Bugfix 39018: Added driver support MPT3SAS and i2c-i801 (Intel 9 Series SMBUS)
Modification: KERNEL & modules.tgz
------------------------------------------------------------------------------
v3.65 - 02.024 Date: 08.09.2014, OCT
Bugfix 39018: Added vendor driver r8152 as external driver
Modification: KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.67 - 02.026 Date: 17.09.2014, OCT JBD
Modification: Kernel & modules.tgz: - Added MMC modules to support Tablets
with MMC disks (Dell Venue 11 Pro).
initrd: - Resized RAM disk from 96 MB to 125 MB
- added eMMC modules load to seldest script
- Changed all the pxe messages in runlevel scripts etc
postsetup.inf: Added new postsetup.inf script for grub2 support
-------------------------------------------------------------------------------
v3.68 - 03.001 Date: 16.10.2014, OCT ESC
Modification: Kernel & modules.tgz: - Added MSI Support
Added various Vendor compatibility Modules for Notebooks
Added Intel HD Graphics DRM support

EFI Grub bootloader: grub.cfg modified (gfxpayload, gfxmode)
Backgroundimage changed
-------------------------------------------------------------------------------
v3.69 - 03.002 Date: 30.10.2014, OCT
Modification: Kernel & modules.tgz: - Added MSI Support
Added various Vendor compatibility Modules for Notebooks
Added Intel HD Graphics DRM support

-------------------------------------------------------------------------------
------------------------- End EPE_Info.txt --------------------

pzaenker
Beiträge: 3
Registriert: 07. Jul 2014, 15:00
Kontaktdaten:

Re: EPE Fehler "target device [...] cannot be detected"

Beitrag von pzaenker » 11. Feb 2015, 14:39

Wir haben hier ein vergleichbares Problem. Allerdings nur bei einem ganz neuen HP ProDesk 490 G2

Ich habe es mit verschiedenen Empirum PE2 versionen veruscht. Die aktuelle 3.69 geht auch nicht.


Ich denke ja, dass es an fehlenden Treibern liegt, aber woher bekomme ich die passenden um sie einzubinden?
Ich habe nru folgenden link gefunden, der mich nicht wirklich weiter bringt, da es der falsche Chipsatz ist:
http://www.wpm-blog.de/einbinden-von-st ... -chipsatz/


Outputs of 'lspci'
------------------------- lspci --------------------

00:00.0 Host bridge: Intel Corporation: Unknown device 0c00 (rev 06)
00:02.0 VGA compatible controller: Intel Corporation: Unknown device 0412 (rev 06)
00:03.0 Audio device: Intel Corporation: Unknown device 0c0c (rev 06)
00:14.0 USB Controller: Intel Corporation: Unknown device 8cb1
00:16.0 Communication controller: Intel Corporation: Unknown device 8cba
00:1a.0 USB Controller: Intel Corporation: Unknown device 8cad
00:1b.0 Audio device: Intel Corporation: Unknown device 8ca0
00:1c.0 PCI bridge: Intel Corporation: Unknown device 8c90 (rev d0)
00:1c.2 PCI bridge: Intel Corporation: Unknown device 8c94 (rev d0)
00:1d.0 USB Controller: Intel Corporation: Unknown device 8ca6
00:1f.0 ISA bridge: Intel Corporation: Unknown device 8cc6
00:1f.2 SATA controller: Intel Corporation: Unknown device 8c82
00:1f.3 SMBus: Intel Corporation: Unknown device 8ca2
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0c)
---------------------- END lspci ---------------------

Benutzeravatar
Hendrik_Ambrosius
Moderator
Moderator
Beiträge: 7552
Registriert: 13. Dez 2004, 23:10
Wohnort: Adendorf/Lüneburg

Re: EPE Fehler "target device [...] cannot be detected"

Beitrag von Hendrik_Ambrosius » 29. Jul 2015, 22:51

Falls das Problem noch aktuell sein sollte - habe heute die gleiche Herausforderung gehabt und das Umstellen des Harddisk-Modus von "ACPI" auf "RAID" im BIOS hat geholfen.
Hendrik Ambrosius / Senior Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 AG | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG or of the support team.

MezzoDo
Beiträge: 16
Registriert: 07. Jan 2014, 09:50
Wohnort: Bochum
Kontaktdaten:

Re: EPE Fehler "target device [...] cannot be detected"

Beitrag von MezzoDo » 12. Mai 2016, 13:17

Hendrik_Ambrosius hat geschrieben:Falls das Problem noch aktuell sein sollte - habe heute die gleiche Herausforderung gehabt und das Umstellen des Harddisk-Modus von "ACPI" auf "RAID" im BIOS hat geholfen.
Gibt's hierzu noch keine andere Lösung?
Zum einen macht der RAID-Mode mit unserer Verschlüsselung noch Probleme, sodass wir noch auf AHCI setzen müssen. Andererseits funktioniert es auch testweise nicht mit dem RAID Modus, wird mit der selben Meldung abgebrochen.

Es handelt sich um einen DELL Latitude E5470.

Antworten

Zurück zu „OS Installer“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 6 Gäste