Lenovo Carbon X1 NETSpy Problemchen

Moderator: jknoth

Benutzeravatar
Bobby.S
Beiträge: 63
Registriert: 20. Feb 2015, 12:05
Kontaktdaten:

Lenovo Carbon X1 NETSpy Problemchen

Beitrag von Bobby.S » 15. Jun 2015, 15:32

Hallo zusammen,

ich habe hier ein kleines Problem beim NetSpy/PXESpy auf einem Lenovo X1 Carbon Notebooks/Ultrabooks.
Mir wird leider keine Spy-File erzeugt, nach starten des PXE boots und des EPE-Images läuft das Gerät in einer Schleife.
Benutzt habe ich das aktuellste EPE-Image (Empirum PE2 3.14.4-gentoo_3.71) aber ich vermute einfach mal, dass es dennoch keine Treiberunterstützung für mein Gerät bietet.
Das Lenovo Notebook hat auch eine etwas exotischere Netzwerkkarte.
Ich habe wie in diesem Forumeintrag: " https://forum.matrix42.com/viewtopic.php?f=4&t=13783 " beschrieben, einen Versuch mit der Variante NetSpy per USB-Stick gestartet und dabei nur einen EPE-Log bekommen (Dieser ist angehängt).
Interessant ist, dass in der untersten Zeile wohl keine "pcitable" gefunden wird.
Ist das der Hinweis darauf, dass die Netzwerkkarte nicht unterstützt wird ?

Code: Alles auswählen

Begin time for EPE logging: Mon Jun 15 20:52:14 GMT 2015


Outputs of 'dmesg'
------------------------- DMESG --------------------

pci 0000:04:00.0: [8086:095b] type 00 class 0x028000
pci 0000:04:00.0: reg 10: [mem 0xf1000000-0xf1001fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1:   bridge window [mem 0xf1000000-0xf10fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbe0b3000-0xbfffffff]
e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff]
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000c3fff]
pnp 00:00: [mem 0x000c4000-0x000c7fff]
pnp 00:00: [mem 0x000c8000-0x000cbfff]
pnp 00:00: [mem 0x000cc000-0x000cffff]
pnp 00:00: [mem 0x000d0000-0x000d3fff]
pnp 00:00: [mem 0x000d4000-0x000d7fff]
pnp 00:00: [mem 0x000d8000-0x000dbfff]
pnp 00:00: [mem 0x000dc000-0x000dffff]
pnp 00:00: [mem 0x000e0000-0x000e3fff]
pnp 00:00: [mem 0x000e4000-0x000e7fff]
pnp 00:00: [mem 0x000e8000-0x000ebfff]
pnp 00:00: [mem 0x000ec000-0x000effff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0xcfffffff]
pnp 00:00: [mem 0xfec00000-0xffffffff]
pnp 00:00: [mem 0xfed4c000-0xfed4bfff disabled]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-3f]
pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: [io  0x0000-0x0cf7 window]
pnp 00:01: [io  0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0xd0000000-0xfebfffff window]
pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0090-0x009f]
pnp 00:02: [io  0x0024-0x0025]
pnp 00:02: [io  0x0028-0x0029]
pnp 00:02: [io  0x002c-0x002d]
pnp 00:02: [io  0x0030-0x0031]
pnp 00:02: [io  0x0034-0x0035]
pnp 00:02: [io  0x0038-0x0039]
pnp 00:02: [io  0x003c-0x003d]
pnp 00:02: [io  0x00a4-0x00a5]
pnp 00:02: [io  0x00a8-0x00a9]
pnp 00:02: [io  0x00ac-0x00ad]
pnp 00:02: [io  0x00b0-0x00b5]
pnp 00:02: [io  0x00b8-0x00b9]
pnp 00:02: [io  0x00bc-0x00bd]
pnp 00:02: [io  0x0050-0x0053]
pnp 00:02: [io  0x0072-0x0077]
pnp 00:02: [io  0x1800-0x189f]
pnp 00:02: [io  0x0800-0x087f]
pnp 00:02: [io  0x0880-0x08ff]
pnp 00:02: [io  0x0900-0x097f]
pnp 00:02: [io  0x0980-0x09ff]
pnp 00:02: [io  0x0a00-0x0a7f]
pnp 00:02: [io  0x0a80-0x0aff]
pnp 00:02: [io  0x0b00-0x0b7f]
pnp 00:02: [io  0x0b80-0x0bff]
pnp 00:02: [io  0x15e0-0x15ef]
pnp 00:02: [io  0x1600-0x167f]
pnp 00:02: [io  0x1640-0x165f]
pnp 00:02: [mem 0xf8000000-0xfbffffff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed10000-0xfed13fff]
pnp 00:02: [mem 0xfed18000-0xfed18fff]
pnp 00:02: [mem 0xfed19000-0xfed19fff]
pnp 00:02: [mem 0xfed45000-0xfed4bfff]
system 00:02: [io  0x1800-0x189f] has been reserved
system 00:02: [io  0x0800-0x087f] has been reserved
system 00:02: [io  0x0880-0x08ff] has been reserved
system 00:02: [io  0x0900-0x097f] has been reserved
system 00:02: [io  0x0980-0x09ff] has been reserved
system 00:02: [io  0x0a00-0x0a7f] has been reserved
system 00:02: [io  0x0a80-0x0aff] has been reserved
system 00:02: [io  0x0b00-0x0b7f] has been reserved
system 00:02: [io  0x0b80-0x0bff] has been reserved
system 00:02: [io  0x15e0-0x15ef] has been reserved
system 00:02: [io  0x1600-0x167f] has been reserved
system 00:02: [io  0x1640-0x165f] has been reserved
system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x0000-0x000f]
pnp 00:04: [io  0x0080-0x008f]
pnp 00:04: [io  0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io  0x0060]
pnp 00:08: [io  0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs LEN0048 PNP0f13 (active)
pnp 00:0a: [mem 0xd0010000-0xd001ffff]
pnp 00:0a: [mem 0xd0000000-0xd000ffff]
system 00:0a: [mem 0xd0010000-0xd001ffff] has been reserved
system 00:0a: [mem 0xd0000000-0xd000ffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 8: assigned [mem 0xd0100000-0xd02fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xd0100000-0xd02fffff]
pci 0000:00:1c.0:   bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1:   bridge window [mem 0xf1000000-0xf10fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd02fffff]
pci_bus 0000:03: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf1000000-0xf10fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 26232k freed
bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.20)
msgmni has been set to 1631
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xe0000000, mapped to 0xf8280000, using 3072k, total 32704k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
XENFS: not registering filesystem on non-xen platform
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI No-Shortcut mode
RAMDISK: gzip image found at block 0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing unused kernel memory: 408k freed
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800, board id: 3072, fw id: 1795685
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
tsc: Refined TSC clocksource calibration: 2394.457 MHz
Switching to clocksource tsc
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input2
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf113d000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf1120000
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 11 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1: new high-speed USB device number 2 using ehci_hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
hub 2-0:1.0: unable to enumerate USB device on port 2
usb 2-5: new full-speed USB device number 3 using xhci_hcd
usb 2-5: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-6: new full-speed USB device number 4 using xhci_hcd
usb 2-7: new full-speed USB device number 5 using xhci_hcd
usb 2-7: No LPM exit latency info found.  Power management will be impacted.
usb 2-8: new high-speed USB device number 6 using xhci_hcd
usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
scsi0 : usb-storage 3-2:1.0
scsi 0:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 6
usbcore: deregistering interface driver usb-storage
usbcore: registered new interface driver asix
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
input: PC Speaker as /devices/platform/pcspkr/input/input3
SCSI subsystem initialized
ide-gd driver 1.18
SGI XFS with security attributes, large block/inode numbers, no debug enabled
NTFS driver 2.1.30 [Flags: R/O MODULE].
JFS: nTxBlock = 8192, nTxLock = 65536
Key type dns_resolver registered
NET: Registered protocol family 33
Key type rxrpc registered
Key type rxrpc_s registered
kAFS: Red Hat AFS client v0.1 registering.
async_tx: api initialized (async)
raid6: mmxx1     3505 MB/s
raid6: mmxx2     4469 MB/s
raid6: sse1x1    3800 MB/s
raid6: sse1x2    4519 MB/s
raid6: sse2x1    7696 MB/s
raid6: sse2x2    9155 MB/s
raid6: using algorithm sse2x2 (9155 MB/s)
raid6: using ssse3x1 recovery algorithm
xor: automatically using best checksumming function:
   avx       : 22638.000 MB/sec
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
md: raid10 personality registered for level 10
md: raid1 personality registered for level 1
md: linear personality registered for level -1
device-mapper: multipath: version 1.5.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
---------------------- END DMESG ---------------------

Outputs of 'lsmod'
------------------------- LSMOD --------------------

Module                  Size  Used by
dm_mirror               9763  0 
dm_region_hash          5036  1 dm_mirror
raid0                   6256  0 
dm_thin_pool           28592  0 
dm_bio_prison           2676  1 dm_thin_pool
multipath               4461  0 
dm_snapshot            22039  0 
dm_round_robin          1616  0 
dm_multipath           11673  1 dm_round_robin
scsi_dh                 3518  1 dm_multipath
linear                  2996  0 
dm_raid                11253  0 
raid1                  20861  1 dm_raid
dm_log                  6301  2 dm_mirror,dm_region_hash
dm_persistent_data     26070  1 dm_thin_pool
dm_bufio                9632  1 dm_persistent_data
crc32c                  1093  1 
libcrc32c                627  1 dm_persistent_data
raid10                 33039  1 dm_raid
dm_crypt               10612  0 
dm_zero                  784  0 
dm_mod                 47090  9 dm_mirror,dm_thin_pool,dm_snapshot,dm_multipath,dm_raid,dm_log,dm_bufio,dm_crypt,dm_zero
raid456                45007  1 dm_raid
md_mod                 80122  7 raid0,multipath,linear,dm_raid,raid1,raid10,raid456
async_pq                2295  1 raid456
async_xor               1610  2 raid456,async_pq
xor                    14789  1 async_xor
async_memcpy             771  1 raid456
async_raid6_recov        866  1 raid456
raid6_pq               86281  2 async_pq,async_raid6_recov
async_tx                1271  5 raid456,async_pq,async_xor,async_memcpy,async_raid6_recov
cifs                  199288  0 
ncpfs                  33892  0 
minix                  19754  0 
udf                    58284  0 
crc_itu_t               1012  1 udf
af_rxrpc               56519  0 
dns_resolver            3141  0 
jfs                   127316  0 
reiserfs              161713  0 
ntfs                   71074  0 
coda                   21017  0 
xfs                   340871  0 
exportfs                2410  1 xfs
msdos                   4892  0 
isofs                  24219  0 
ide_gd_mod             11902  0 
sd_mod                 22673  0 
scsi_mod               97881  2 scsi_dh,sd_mod
pcspkr                  1264  0 
input_polldev           1799  0 
xtkbd                   1575  0 
sunkbd                  2770  0 
newtonkbd               1407  0 
ff_memless              3164  0 
sermouse                2451  0 
edd                     5389  0 
asix                   14509  0 
libphy                 13969  1 asix
usbnet                 10851  1 asix
mii                     2804  2 asix,usbnet
usbhid                 25848  0 
sl811_hcd               7548  0 
xhci_hcd               61460  0 
uhci_hcd               16103  0 
ohci_hcd               15615  0 
isp116x_hcd            10170  0 
ehci_hcd               30412  0 
usbcore                96644  9 asix,usbnet,usbhid,sl811_hcd,xhci_hcd,uhci_hcd,ohci_hcd,isp116x_hcd,ehci_hcd
usb_common               567  1 usbcore
---------------------- END LSMOD ---------------------

Outputs of 'lspci'
------------------------- lspci --------------------

00:00.0 Host bridge: Intel Corporation: Unknown device 1604 (rev 09)
00:02.0 VGA compatible controller: Intel Corporation: Unknown device 1616 (rev 09)
00:03.0 Audio device: Intel Corporation: Unknown device 160c (rev 09)
00:14.0 USB Controller: Intel Corporation: Unknown device 9cb1 (rev 03)
00:16.0 Communication controller: Intel Corporation: Unknown device 9cba (rev 03)
00:19.0 Ethernet controller: Intel Corporation: Unknown device 15a3 (rev 03)
00:1b.0 Audio device: Intel Corporation: Unknown device 9ca0 (rev 03)
00:1c.0 PCI bridge: Intel Corporation: Unknown device 9c92 (rev e3)
00:1c.1 PCI bridge: Intel Corporation: Unknown device 9c94 (rev e3)
00:1d.0 USB Controller: Intel Corporation: Unknown device 9ca6 (rev 03)
00:1f.0 ISA bridge: Intel Corporation: Unknown device 9cc3 (rev 03)
00:1f.2 SATA controller: Intel Corporation: Unknown device 9c83 (rev 03)
00:1f.3 SMBus: Intel Corporation: Unknown device 9ca2 (rev 03)
00:1f.6 Signal processing controller: Intel Corporation: Unknown device 9ca4 (rev 03)
04:00.0 Network controller: Intel Corporation: Unknown device 095b (rev 59)
---------------------- END lspci ---------------------

Outputs of 'lspci -n'
------------------------- lspci -n --------------------

00:00.0 Class 0600: 8086:1604 (rev 09)
00:02.0 Class 0300: 8086:1616 (rev 09)
00:03.0 Class 0403: 8086:160c (rev 09)
00:14.0 Class 0c03: 8086:9cb1 (rev 03)
00:16.0 Class 0780: 8086:9cba (rev 03)
00:19.0 Class 0200: 8086:15a3 (rev 03)
00:1b.0 Class 0403: 8086:9ca0 (rev 03)
00:1c.0 Class 0604: 8086:9c92 (rev e3)
00:1c.1 Class 0604: 8086:9c94 (rev e3)
00:1d.0 Class 0c03: 8086:9ca6 (rev 03)
00:1f.0 Class 0601: 8086:9cc3 (rev 03)
00:1f.2 Class 0106: 8086:9c83 (rev 03)
00:1f.3 Class 0c05: 8086:9ca2 (rev 03)
00:1f.6 Class 1180: 8086:9ca4 (rev 03)
04:00.0 Class 0280: 8086:095b (rev 59)
---------------------- END lspci -n ---------------------

Content of '/proc/partitions'
------------------------- /proc/partitions --------------------

major minor  #blocks  name

---------------------- END /proc/partitions ---------------------

Content of '/proc/net/dev'
------------------------- /proc/net/dev --------------------

Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
  sit0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
    lo: 6923701    5050    0    0    0     0          0         0  6923701    5050    0    0    0     0       0          0
---------------------- END /proc/net/dev ---------------------

Content of '/proc/cmdline'
------------------------- /proc/cmdline --------------------

BOOT_IMAGE=kernel ramdisk_size=328192 init=/bin/minit CONSOLE=/dev/tty1 vga=0x317 root=/dev/ram0 rw quiet irqpoll pci=nomsi EIS_REINSTALLALLOW=0 EPE_LANGUAGE=ENU EPE_OSSEL=0 EPE_MBRID=0062DFA-056F6EB-0000000-0000000 initrd=/initrd.gz
---------------------- END /proc/cmdline ---------------------

ls -l /lib/modules/
------------------------- /lib/modules/ --------------------

total 1
drwxr-xr-x 4 root root 1024 Jun 15 20:51 3.7.7-gentoo
---------------------- END /lib/modules/ ---------------------

uname -r
------------------------- uname -r --------------------

3.7.7-gentoo
---------------------- END uname -r ---------------------
No /tmp/pcitable found

------------------------- Debug Messages --------------------
10 uncrypt reading disk.ini
0 uncrypt decrypting ...
0 uncrypt decryption completed successfully
5 syslog catching pending Kernel-messages
10 boot msg_enter
0 boot mounting /proc
0 boot mounting /sys
5 boot performing udev initial scan
5 boot making udev managing hotplug events
0 boot choosing network mode
0 boot  network mode:  dhcp
10 syslog starting klogd
10 syslog starting syslogd
0 boot setting up modul-dependentcies
0 boot setting hostname
0 boot checking if CPU has 64Bit capability
0 boot CPU has 64Bit capability
0 boot preparing modules
0 boot updating modules.conf
0 boot loading usb modules
10 lo entering runlevel
1 lo setting up loopback interface
1 lo Loopback interface succsessfully set up
10 httpd entering runlevel
10 startx entering runlevel
1 httpd Configuring .htaccess
0 startx starting Tiny-X for framebuffer devices Xfbdev
1 httpd htpassword successfully configured
1 httpd setting environment-variable $DESKTOP_DEST
1 httpd httpd starting httpd
0 startx setting DISPLAY-variable
0 startx Starting Browser
10 startx browser executed successfully
10 modsetup entering runlevel
0 modsetup preparing modules directory
0 modsetup removing usb_storage
0 modsetup Loading USB Net driver asix
0 modsetup loading edd support
0 modsetup loading input device driver
0 modsetup installing Driver sermouse
0 modsetup installing Driver ff-memless
0 modsetup installing Driver newtonkbd
0 modsetup installing Driver sunkbd
0 modsetup installing Driver xtkbd
0 modsetup installing Driver input-polldev
0 modsetup installing Driver pcspkr
0 modsetup installing Installing IDE-drivers
0 modsetup installing NIC-drivers
0 modsetup installing SCSI-drivers
0 modsetup loading scsi low-level-drivers
0 modsetup loading inserting scsi disk-driver
0 modsetup loading inserting ide disk-driver
0 modsetup loading fs-support
0 modsetup installing Driver msdos
0 modsetup installing Driver xfs
0 modsetup installing Driver coda
0 modsetup installing Driver ntfs
0 modsetup installing Driver reiserfs
0 modsetup installing Driver jfs
0 modsetup installing Driver exportfs
0 modsetup installing Driver kafs
0 modsetup installing Driver udf
0 modsetup installing Driver minix
0 modsetup installing Driver ncpfs
0 modsetup installing Driver cifs
0 modsetup installing Driver isofs
0 modsetup loading raid and lvm
0 modsetup installing Driver raid456
0 modsetup installing Driver dm-zero
0 modsetup installing Driver dm-crypt
0 modsetup installing Driver raid10
0 modsetup installing Driver dm-persistent-data
0 modsetup installing Driver dm-log
0 modsetup installing Driver dm-raid
0 modsetup installing Driver linear
0 modsetup installing Driver dm-round-robin
0 modsetup installing Driver md-mod
0 modsetup installing Driver dm-snapshot
0 modsetup installing Driver multipath
0 modsetup installing Driver dm-mod
0 modsetup installing Driver raid1
0 modsetup installing Driver dm-thin-pool
0 modsetup installing Driver raid0
0 modsetup installing Driver dm-region-hash
0 modsetup installing Driver dm-multipath
0 modsetup installing Driver dm-mirror
0 modsetup installing Driver dm-bio-prison
0 modsetup installing Driver dm-bufio
------------------------- End Debug Messages --------------------

------------------------- EPE_Info.txt --------------------
OCT v3.04   Datum: 25.02.2011
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	28.01.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		PRB22115: Added new driver "hpsa" for HP Smart Arrays
	Modified:	KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.05   Datum: 01.03.2011
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	01.03.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		18880: Handling of special characters (\ $ ?) in passwords
	Modified:	initrd: /bin/functions.sh
-------------------------------------------------------------------------------
OCT v3.06   Datum: 14.03.2011
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	14.03.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		20135: Reading of configfile from TFTP-Cache
	Modified:	initrd: /bin/functions.sh
-------------------------------------------------------------------------------
OCT v3.07   Datum: 17.03.2011
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	17.03.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		20076: Replace also PXE-ServerIP (if EmpirumServer=PXE-Server) if EmpSRVLong from configuration
						should be replace via DHCP-Options or configfile in TFTP-Root
	Modified:	initrd: /bin/functions.sh, buildpxecmd
-------------------------------------------------------------------------------
OCT v3.08   Datum: 11.04.2011
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	11.04.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		21603: Variables from the CFG-File from BMC should be read before. 
	Modified:	initrd: runlevel network
-------------------------------------------------------------------------------
OCT v3.09   Datum: 20.04.2011
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	20.04.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		21598: Do not abort if unattend.xml file for vista+ not found on server
	Modified:	initrd: runlevel getconfig
-------------------------------------------------------------------------------
OCT v3.10   Datum: 07.06.2011
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	07.06.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		20955: Added reports for executed GetHostByName
	Modified:	initrd: runlevel buildpxecmd
-------------------------------------------------------------------------------
OCT v3.11   Datum: 08.06.2011
	Contents: 	KERNEL		 	25.02.2011
				modules.tgz		25.02.2011
				initrd		 	08.06.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		17726: Added reports about mount errors
	Modified:	initrd: runlevel logon
-------------------------------------------------------------------------------
OCT v3.12   Datum: 15.06.2011
	Contents: 	KERNEL		 	15.06.2011
				modules.tgz		15.06.2011
				initrd		 	08.06.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		22992: Kernel-Update to 2.6.39-gentoo-r1
	Modified:	KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.13   Datum: 15.07.2011
	Contents: 	KERNEL		 	15.06.2011
				modules.tgz		15.06.2011
				initrd		 	15.07.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		23155: Fallback to IP-based mount, on mount fail. Get SERVERIP via gethostbyName if it is not specified
	Modified:	initrd --> logon, functions.sh
-------------------------------------------------------------------------------
OCT v3.14   Datum: 22.07.2011
	Contents: 	KERNEL		 	22.07.2011
				modules.tgz		22.07.2011
				initrd		 	22.07.2011
				empirum.pcimap	25.03.2010
				
	Bugfix:		23713: Kernel-Update to 2.6.39-gentoo-r3 + New Mount-option 'direct' to solve read/write problems on mount points
	Modified:	KERNEL, modules.tgz and logon
-------------------------------------------------------------------------------
OCT v3.15   Datum: 29.07.2011
	Contents: 	KERNEL		 	29.07.2011
				modules.tgz		29.07.2011
				initrd		 	22.07.2011
				empirum.pcimap	25.03.2010
				
	Bugfix 21845: Kernel-Update to 3.0.0-gentoo
	Modified:	  KERNEL, modules.tgz
-------------------------------------------------------------------------------
OCT v3.16   Datum: 05.08.2011
	Contents: 	KERNEL		 	29.07.2011
				modules.tgz		05.08.2011
				initrd		 	22.07.2011
				empirum.pcimap	25.03.2010
				
	Bugfix 23713: Build of vendor driver e1000e into current kernel 3.0.0-gentoo
	Modified:	  modules.tgz
-------------------------------------------------------------------------------
OCT v3.17   Datum: 23.08.2011
	Contents: 	KERNEL		 	23.08.2011
				modules.tgz		23.08.2011
				initrd		 	22.07.2011
				empirum.pcimap	25.03.2010
				
	Bugfix 24687: Added new versions of firmwares for NIC drivers like bnx2 and bnx2x
	Modified:	  KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.18   Datum: 14.10.2011
	Contents: 	KERNEL		 	14.10.2011
				modules.tgz		14.10.2011
				initrd		 	22.07.2011
				empirum.pcimap	25.03.2010
				
	Bugfix 25749: Kernel-Update to 3.0.6-gentoo, Intel-driver e1000e implemented and bnx2-firmwares updated
	Modified:	  KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.19   Datum: 14.10.2011
	Contents: 	KERNEL		 	14.10.2011
				modules.tgz		14.10.2011
				initrd		 	14.10.2011
				empirum.pcimap	25.03.2010
				
	Bugfix 25198: If EmpSRVLONG as DHCP-Option is empty, do not try to use it to set Server and FQDN
	Modified:	  initrd -> /bin/functions.sh
-------------------------------------------------------------------------------
OCT v3.20   Datum: 11.11.2011
	Contents: 	KERNEL		 	14.10.2011
				modules.tgz		14.10.2011
				initrd		 	11.11.2011
				empirum.pcimap	25.03.2010
				
	Bugfix 25198: Do not set SERVERIP to empty string if EmpSrvLong is empty or only a hostname
				  Do not try to set ServerIP to /etc/hosts if ServerIP is empty
	Modified:	  initrd -> /bin/functions.sh, runlevel network
-------------------------------------------------------------------------------
OCT v3.21 - 01.079   Date: 06.01.2012				
	Bugfix 26339: 	Empty custom.pcimap removed from download folder, so customer version
					of this file will not be replaced anymore
	Modification:	Download folder for FTP
-------------------------------------------------------------------------------
OCT v3.22 - 01.080   Date: 16.01.2012				
	Bugfix 26456: 	Kernel-Update to 3.2.1-gentoo
	Modification:	KERNEL and modules.tgz
-------------------------------------------------------------------------------
OCT v3.23 - 01.081   Date: 07.02.2012				
	Bugfix 26970:	1) New kernel parameter EPE_DHCPCONF created. If it is 0 the dhclient.conf will not be 
					created on runtime of EPE client. -> Bugfix for DEVK
					2) Picked up network script and added some messages
	Modification:	initrd -> network
-------------------------------------------------------------------------------
OCT v3.24 - 01.082   Date: 08.02.2012
	Bugfix 27283:	Added firmwares for NIC drivers
	Modification:	KERNEL + modules.tgz
-------------------------------------------------------------------------------
OCT v3.25 - 01.083   Date: 10.02.2012
	Bugfix 21119:	Added new entry to empirum.pcimap
	Modification:	empirum.pcimap
-------------------------------------------------------------------------------
OCT v3.26 - 01.084   Date: 17.02.2012
	Bugfix 27454:	Added new USB-To-Ethernet driver smsc75xx
					To load this driver it must be set following kernel parameter EPE_LOAD_MODULES=smsc75xx
					because it does not be added to modules.pcimap
	Modification:	KERNEL, modules.tgz and empirum.pcimap
-------------------------------------------------------------------------------
OCT v3.27 - 01.085   Date: 29.02.2012
	Bugfix 27388:	KernelUpdate to 3.2.6-gentoo and added "Support of Multiable CPUs" to expand the count of interrupts
	Modification:	KERNEL, modules.tgz
-------------------------------------------------------------------------------
OCT v3.28 - 01.086   Date: 01.03.2012
	Bugfix DEVK:	Build of vendor driver e1000e into current kernel 3.2.6-gentoo
	Modification:	KERNEL, modules.tgz
-------------------------------------------------------------------------------
OCT v3.29 - 01.087   Date: 02.03.2012
	Bugfix 27594: 	Escape all characters (inclusively special characters) in password so that can be read from environment (for EIS)
	Modification:	initrd --> /bin/functions.sh --> read_and_allocate_options
-------------------------------------------------------------------------------
v3.30 - 01.088   Date: 08.03.2012, OCT
	Bugfix 27859: 	Sort found linked interfaces to begin scanning with eth0
	Modification:	initrd --> /bin/functions.sh --> load_alternative_modules_and_get_linked_interfaces
-------------------------------------------------------------------------------
v3.31 - 01.089   Date: 09.03.2012, OCT
	Bugfix 27365:	KernelUpdate to 3.2.9-gentoo and added "Xen Guest support" to install VMs on XenServer
	Modification:	initrd --> /bin/functions.sh --> read_and_allocate_options
					KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.32 - 01.090   Date: 11.05.2012, OCT
	Bugfix 28870:	KernelUpdate to 3.3.4-gentoo, patch for driver forcedeth, e1000e replaced with vendor driver
	Modification:	KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.33 - 01.091   Date: 24.05.2012, OCT
	Bugfix 29016:	All scripts in runlevel prepare are collected in only one, so we have not to enhance EPE for new OS types any more
	Modification:	initrd --> all scripts in runlevel prepare
-------------------------------------------------------------------------------
v3.34 - 01.092   Date: 22.06.2012, OCT
	Bugfix 29221:	Kernel update to 3.4.3-gentoo with patch of forcedeth driver, NIC firmwares, 
					new driver 'alx' and with vendor driver 'e1000e'
	Modification:	KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.35 - 01.093   Date: 25.06.2012, OCT
	Bugfix XXXXX:	Activated "ATA support for libsas" in Kernel to support SAS disks (DevID=1d6b and 1d02) 
					in machines from Fujitsu Celsius
	Modification:	KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.36 - 01.094   Date: 17.07.2012, OCT
	Task 29896:		EPE must not check OS type anymore. Runlevel getconfig and getimage revised
	Modification:	initrd
-------------------------------------------------------------------------------
v3.37 - 01.095   Date: 25.07.2012, OCT
	Bugfix 29973:	Don´t use mount options "nounix,noserverino" if Kernelparameter EPE_DONOTSETMOUNTOPTIONS=1 is set
					Neccessary for FreeBSD FileShares
	Modification:	initrd -> runlevel logon
-------------------------------------------------------------------------------
v3.38 - 01.096   Date: 27.07.2012, OCT
	Bugfix 30012:	Added USB3.0 support into the current kernel
	Modification:	KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.39 - 01.097   Date: 03.08.2012, OCT
	Bugfix 30012:	Load USB3.0 driver xhci-hcd explicitly to runtime
	Modification:	initrd --> runlevel boot
-------------------------------------------------------------------------------
v3.40 - 01.098   Date: 08.08.2012, OCT
	Bugfix 30272:	Variable MISC -> OS from disk.ini must be convert to upper case to avoid
					problems with case-sensivity
	Modification:	initrd --> runlevel getimage
-------------------------------------------------------------------------------
v3.41 - 02.000   Date: 24.08.2012, OCT
	Bugfix 30629:	KernelUpdate to 3.5.2-gentoo (contains drivers alx, e1000e from vendors, patch for driver forcedeth and NIC firmwares)
	Modification:	KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.42 - 02.001   Date: 27.08.2012, OCT
	Bugfix 30677:	Rebranding EPE -> new gifs added for EPE client
	Modification:	initrd --> /var/www/data/ --> new gifs
-------------------------------------------------------------------------------
v3.43 - 02.002   Date: 10.09.2012, OCT
	Bugfix 30944:	- Added some CIFS attributes like "Support legacy servers which use weaker LANMAN security"
					- Deprecated mount option 'direct' replaced with cache=none
	Modification:	initrd, KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.44 - 02.003   Date: 18.09.2012, OCT
	Bugfix 30775:	Update of 'dmraid' and 'device-mapper' to support new SWRAID controller
	Modification:	initrd
-------------------------------------------------------------------------------
v3.45 - 02.004   Date: 19.09.2012, OCT
	Bugfix 29191:	Handle new dhcp option SERVICESERVERIP to avoid use of PXEImgChange.exe
	Modification:	initrd
-------------------------------------------------------------------------------
v3.46 - 02.005   Date: 02.10.2012, OCT
	Bugfix 30775:	Undo unneeded changes for 'dmraid' and 'device-mapper' to support new SWRAID controller
	Modification:	initrd
-------------------------------------------------------------------------------
v3.47 - 02.006   Date: 02.10.2012, OCT
	Bugfix 31233:	EPE Localization fixes
	Modification:	initrd -> startx
-------------------------------------------------------------------------------
v3.48 - 02.007   Date: 12.10.2012, OCT
	Bugfix 31363:	Missing driver 'alx' because of build failures
	Modification:	KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.49 - 02.008   Date: 15.10.2012, OCT
	Bugfix 31116:	EndOfLife was failed because of missing OS type
	Modification:	initrd --> getconfig & getimage
-------------------------------------------------------------------------------
v3.50 - 02.009   Date: 17.10.2012, OCT
	Bugfix 31502:	Added convenient message if Scripts2 directory on Empirum server is missing
	Modification:	initrd --> getimage
-------------------------------------------------------------------------------
v3.51 - 02.010   Date: 30.10.2012, OCT
	Bugfix 31630:	Syntax error in message
	Modification:	initrd --> getimage
-------------------------------------------------------------------------------
v3.52 - 02.011   Date: 05.11.2012, OCT
	Bugfix 31618:	Kernel update to linux-3.6.4-gentoo --> support of new ASIX USB Net driver
	Modification:	KERNEL & modules.tgz
-------------------------------------------------------------------------------
v3.53 - 02.012   Date: 09.11.2012, OCT
	Bugfix 31640:	Load ASIX USB Net driver automatically in runlevel modsetup
	Modification:	initrd
-------------------------------------------------------------------------------
v3.54 - 02.013   Date: 30.11.2012, OCT
	Bugfix 31936:	Reload the 3com driver 3c59x - It is needed for 3C905C TX/TX-M card
	Modification:	initrd --> network
-------------------------------------------------------------------------------
v3.55 - 02.014   Date: 25.01.2013, OCT
	Bugfix 32533:	PRB24978: igb driver patched + Kernel update to 3.7.2-gentoo
	Modification:	KERNEL + modules.tgz
-------------------------------------------------------------------------------
v3.56 - 02.015   Date: 15.02.2013, OCT
	Bugfix 32743:	Kernel update to 3.7.7-gentoo with patches for forcedeth, igb and alx drivers
	Modification:	KERNEL + modules.tgz
-------------------------------------------------------------------------------
------------------------- End EPE_Info.txt --------------------

No /tmp/pcitable found. EPE can`t create any SPY file.
Hier übrigens ein Bild von der Netzwerkkarte. :mrgreen:
Bild

Bitte um Hilfe..

MfG
Boris.
Mit freundlichem Gruß
Boris.

Produktiv: Empirum v18.0.2 + EPE 4.7.1
Testsystem: Empirum v18.0.2

turbo
Beiträge: 93
Registriert: 01. Jun 2005, 22:07
Wohnort: NRW
Kontaktdaten:

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von turbo » 17. Jun 2015, 14:47

Hallo

wir haben nur eine Handvoll von diesen Exoten im Einsatz

Installiert wird mit 3.14.4 - 3.69 mit folgenden Parametern
ramdisk_size=328192 init=/bin/minit CONSOLE=/dev/tty1 vga=0x317 root=/dev/ram0 rw quiet irqpoll pci=nomsi EIS_REINSTALLALLOW=0

wir haben die dinger hier mit SSD am laufen, einige treiber müssen noch eingebunden werden bzw. die lenovo Hotkey Feature.. habe wir als paket erstellt da es damit besser funktioniert.

Die NetKarte ist eine Intel l218 -v (net Peitsche), wichtig wäre vielleicht noch zu erwähnen das solltest du das ganze über die Dockingstation machen bzw. dem PortReplikator dann muss du auch noch den Treiber der Karte aus dem Docking bzw. portrepl. einbinden und als hardware typ hinterlegen.

Benutzeravatar
Bobby.S
Beiträge: 63
Registriert: 20. Feb 2015, 12:05
Kontaktdaten:

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von Bobby.S » 17. Jun 2015, 14:54

turbo hat geschrieben:Die NetKarte ist eine Intel l218 -v (net Peitsche), wichtig wäre vielleicht noch zu erwähnen das solltest du das ganze über die Dockingstation machen bzw. dem PortReplikator dann muss du auch noch den Treiber der Karte aus dem Docking bzw. portrepl. einbinden und als hardware typ hinterlegen.
Hallo Turbo,

danke für die Antwort, okay verstehe also was würdest du mir am besten empfehlen wie ich vor zu gehen habe ?
Das Problem an diesem Dock/PortReplikator ist, dass dieser nicht über das Netzwerk angesprochen wird.
Jedenfalls bei uns nicht, die "Peitsche" aber schon.. :mrgreen:

In den BIOS Einstellungen hatte ich noch auf das Legacy verfahren umgestellt, anstelle des UEFI boots (noch mal als Info)...

MfG
Boris.
Mit freundlichem Gruß
Boris.

Produktiv: Empirum v18.0.2 + EPE 4.7.1
Testsystem: Empirum v18.0.2

turbo
Beiträge: 93
Registriert: 01. Jun 2005, 22:07
Wohnort: NRW
Kontaktdaten:

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von turbo » 17. Jun 2015, 21:30

Hallo

ich habe es nur mit der Peitsche eingebunden. Nach den ersten problemene hatte ich um Internet gesucht und gelesen das es mit dem Replikator nicht richtig funktioniert. War zwar ein älterer beitrag aber hatte mich überzeugt es damit nicht zu weiter testen. Mit der Peitsche ging es relativ schmerzfrei.

Was ich aber schmerzlich erfahren musste war das die Dockingstation/Replikator nach der installation einen treiber braucht damit sie funktioniert. Vielleich kann man den Treiber mit dem EPE laden lassen.
Und Sie wird mit einer anderen MAc adresse inventarisiert.

Benutzeravatar
Bobby.S
Beiträge: 63
Registriert: 20. Feb 2015, 12:05
Kontaktdaten:

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von Bobby.S » 18. Jun 2015, 09:59

Hey,

danke noch mal für die Infos.
Habe den TFTP-Cache gelöscht und noch mal das neueste Template 3.71 eingebunden, anschließend den Spy durch laufen lassen (mit angeschlossener NET-Peitsche) und dann hats auch geklappt.

Code: Alles auswählen

Begin time for EPE logging: Thu Jun 18 15:17:10 GMT 2015


Outputs of 'dmesg'
------------------------- DMESG --------------------

system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x1800-0x189f] could not be reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0880-0x08ff] has been reserved
system 00:01: [io  0x0900-0x097f] has been reserved
system 00:01: [io  0x0980-0x09ff] has been reserved
system 00:01: [io  0x0a00-0x0a7f] has been reserved
system 00:01: [io  0x0a80-0x0aff] has been reserved
system 00:01: [io  0x0b00-0x0b7f] has been reserved
system 00:01: [io  0x0b80-0x0bff] has been reserved
system 00:01: [io  0x15e0-0x15ef] has been reserved
system 00:01: [io  0x1600-0x167f] has been reserved
system 00:01: [io  0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs LEN0048 PNP0f13 (active)
system 00:09: [mem 0xd0010000-0xd001ffff] has been reserved
system 00:09: [mem 0xd0000000-0xd000ffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 8: assigned [mem 0xd0100000-0xd02fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xd0100000-0xd02fffff]
pci 0000:00:1c.0:   bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1:   bridge window [mem 0xf1000000-0xf10fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd02fffff]
pci_bus 0000:03: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xf1000000-0xf10fffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 29972K (ce29b000 - cffe0000)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.22)
msgmni has been set to 1633
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xe0000000, mapped to 0xf8280000, using 3072k, total 32704k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 1ff0000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear.
fbcon: inteldrmfb (fb0) is primary device
tsc: Refined TSC clocksource calibration: 2394.460 MHz
Switched to clocksource tsc
Console: switching to colour frame buffer device 320x90
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
acpi device:01: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf113d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 11 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
fujitsu_laptop: driver 0.6.0 successfully loaded
fujitsu_tablet: Unknown (using defaults)
msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Using IPI No-Shortcut mode
usb 1-1: new high-speed USB device number 2 using ehci-pci
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
usb 2-5: new full-speed USB device number 3 using xhci_hcd
usb 2-5: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800, board id: 3072, fw id: 1795685
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
RAMDISK: gzip image found at block 0
usb 2-6: new full-speed USB device number 4 using xhci_hcd
usb 2-7: new full-speed USB device number 5 using xhci_hcd
usb 2-7: No LPM exit latency info found.  Power management will be impacted.
usb 2-8: new high-speed USB device number 6 using xhci_hcd
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing unused kernel memory: 420K (c1695000 - c16fe000)
random: minised urandom read with 14 bits of entropy available
usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
SCSI subsystem initialized
usb-storage 3-2:1.0: USB Mass Storage device detected
Vendor: 0x8564, Product: 0x1000, Revision: 0x1100
Interface Subclass: 0x06, Protocol: 0x50
Transport: Bulk
Protocol: Transparent SCSI
scsi0 : usb-storage 3-2:1.0
*** thread sleeping
usb-storage 3-2:1.0: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
usb-storage 3-2:1.0: starting scan
rq=fe rqtype=a1 value=0000 index=00 len=1
GetMaxLUN command result is 1, data is 0
*** thread awakened
Command INQUIRY (6 bytes)
bytes: 
 12 00 00 00 24 00
Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
xfer 31 bytes
Status code 0; transferred 31/31
-- transfer complete
Bulk command transfer result=0
xfer 36 bytes, 1 entries
Status code 0; transferred 36/36
-- transfer complete
Bulk data transfer result 0x0
Attempting to get CSW...
xfer 13 bytes
Status code 0; transferred 13/13
-- transfer complete
Bulk status result = 0
Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
scsi cmd done, result=0x0
*** thread sleeping
scsi 0:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 6
usb-storage 3-2:1.0: scan complete
waiting module removal not supported: please upgrade
usbcore: deregistering interface driver usb-storage
-- sending exit command to thread
*** thread awakened
-- exiting
waiting module removal not supported: please upgrade
usbcore: registered new interface driver asix
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
input: PC Speaker as /devices/platform/pcspkr/input/input8
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0 (unregistered net_device): Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:ee:75:51:dc:56
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x8 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf113c000 port 0xf113c280 irq 19
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata4.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: ATA-9: SAMSUNG MZNTE256HMHP-000L7, EXT28L6Q, max UDMA/133
ata4.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata4.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG MZNTE256 EXT2 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 3:0:0:0: [sda] Attached SCSI disk
ide-gd driver 1.18
SGI XFS with security attributes, large block/inode numbers, no debug enabled
NTFS driver 2.1.30 [Flags: R/O MODULE].
JFS: nTxBlock = 8192, nTxLock = 65536
Key type dns_resolver registered
NET: Registered protocol family 33
Key type rxrpc registered
Key type rxrpc_s registered
kAFS: Red Hat AFS client v0.1 registering.
async_tx: api initialized (async)
raid6: mmxx1     4421 MB/s
raid6: mmxx2     4471 MB/s
raid6: sse1x1    3804 MB/s
raid6: sse1x2    4548 MB/s
raid6: sse2x1    7709 MB/s
raid6: sse2x2    9287 MB/s
raid6: using algorithm sse2x2 (9287 MB/s)
raid6: using ssse3x1 recovery algorithm
xor: automatically using best checksumming function:
   avx       : 23410.000 MB/sec
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
md: raid10 personality registered for level 10
md: raid1 personality registered for level 1
device-mapper: raid: Loading target version 1.5.2
md: linear personality registered for level -1
device-mapper: multipath: version 1.6.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
---------------------- END DMESG ---------------------

Outputs of 'lsmod'
------------------------- LSMOD --------------------

Module                  Size  Used by
dm_mirror               9355  0 
dm_region_hash          5023  1 dm_mirror
raid0                   6151  0 
dm_thin_pool           34357  0 
dm_bio_prison           2849  1 dm_thin_pool
multipath               4460  0 
dm_snapshot            22484  0 
dm_round_robin          1615  0 
dm_multipath           11953  1 dm_round_robin
scsi_dh                 3541  1 dm_multipath
linear                  3023  0 
dm_raid                13519  0 
raid1                  21288  1 dm_raid
dm_log                  6300  2 dm_mirror,dm_region_hash
dm_persistent_data     33034  1 dm_thin_pool
dm_bufio               10391  2 dm_snapshot,dm_persistent_data
raid10                 32738  1 dm_raid
dm_crypt               12144  0 
dm_zero                  783  0 
dm_mod                 56873  10 dm_mirror,dm_thin_pool,dm_snapshot,dm_multipath,dm_raid,dm_log,dm_persistent_data,dm_bufio,dm_crypt,dm_zero
raid456                48588  1 dm_raid
md_mod                 81076  7 raid0,multipath,linear,dm_raid,raid1,raid10,raid456
async_pq                3104  1 raid456
async_xor               2217  2 raid456,async_pq
xor                    17336  1 async_xor
async_memcpy             922  1 raid456
async_raid6_recov        865  1 raid456
raid6_pq               86536  2 async_pq,async_raid6_recov
async_tx                1298  5 raid456,async_pq,async_xor,async_memcpy,async_raid6_recov
cifs                  205923  0 
ncpfs                  33933  0 
minix                  19791  0 
udf                    59407  0 
crc_itu_t               1011  1 udf
kafs                   61484  0 
af_rxrpc               56826  3 kafs
dns_resolver            3144  1 kafs
jfs                   126279  0 
reiserfs              161875  0 
configfs               15397  0 
ntfs                   70929  0 
coda                   21244  0 
xfs                   389786  0 
exportfs                2555  1 xfs
crc32c                  1092  1 
libcrc32c                626  2 dm_persistent_data,xfs
msdos                   4891  0 
isofs                  24157  0 
ide_gd_mod             11953  0 
sd_mod                 23307  0 
ahci                   19435  0 
libahci                15119  1 ahci
libata                120222  2 ahci,libahci
scsi_mod              106618  3 scsi_dh,sd_mod,libata
i2c_i801                7214  0 
e1000e                139345  0 
ptp                     5476  1 e1000e
pps_core                4701  1 ptp
pcspkr                  1251  0 
xtkbd                   1578  0 
sunkbd                  2769  0 
newtonkbd               1410  0 
sermouse                2454  0 
edd                     5384  0 
asix                   14827  0 
libphy                 15127  1 asix
usbnet                 14564  1 asix
mii                     2803  2 asix,usbnet
usbhid                 26363  0 
sl811_hcd               7559  0 
isp116x_hcd            10521  0 
---------------------- END LSMOD ---------------------

Outputs of 'lspci'
------------------------- lspci --------------------

00:00.0 Host bridge: Intel Corporation: Unknown device 1604 (rev 09)
00:02.0 VGA compatible controller: Intel Corporation: Unknown device 1616 (rev 09)
00:03.0 Audio device: Intel Corporation: Unknown device 160c (rev 09)
00:14.0 USB Controller: Intel Corporation: Unknown device 9cb1 (rev 03)
00:16.0 Communication controller: Intel Corporation: Unknown device 9cba (rev 03)
00:19.0 Ethernet controller: Intel Corporation: Unknown device 15a3 (rev 03)
00:1b.0 Audio device: Intel Corporation: Unknown device 9ca0 (rev 03)
00:1c.0 PCI bridge: Intel Corporation: Unknown device 9c92 (rev e3)
00:1c.1 PCI bridge: Intel Corporation: Unknown device 9c94 (rev e3)
00:1d.0 USB Controller: Intel Corporation: Unknown device 9ca6 (rev 03)
00:1f.0 ISA bridge: Intel Corporation: Unknown device 9cc3 (rev 03)
00:1f.2 SATA controller: Intel Corporation: Unknown device 9c83 (rev 03)
00:1f.3 SMBus: Intel Corporation: Unknown device 9ca2 (rev 03)
00:1f.6 Signal processing controller: Intel Corporation: Unknown device 9ca4 (rev 03)
04:00.0 Network controller: Intel Corporation: Unknown device 095b (rev 59)
---------------------- END lspci ---------------------

Outputs of 'lspci -n'
------------------------- lspci -n --------------------

00:00.0 Class 0600: 8086:1604 (rev 09)
00:02.0 Class 0300: 8086:1616 (rev 09)
00:03.0 Class 0403: 8086:160c (rev 09)
00:14.0 Class 0c03: 8086:9cb1 (rev 03)
00:16.0 Class 0780: 8086:9cba (rev 03)
00:19.0 Class 0200: 8086:15a3 (rev 03)
00:1b.0 Class 0403: 8086:9ca0 (rev 03)
00:1c.0 Class 0604: 8086:9c92 (rev e3)
00:1c.1 Class 0604: 8086:9c94 (rev e3)
00:1d.0 Class 0c03: 8086:9ca6 (rev 03)
00:1f.0 Class 0601: 8086:9cc3 (rev 03)
00:1f.2 Class 0106: 8086:9c83 (rev 03)
00:1f.3 Class 0c05: 8086:9ca2 (rev 03)
00:1f.6 Class 1180: 8086:9ca4 (rev 03)
04:00.0 Class 0280: 8086:095b (rev 59)
---------------------- END lspci -n ---------------------

Content of '/proc/partitions'
------------------------- /proc/partitions --------------------

major minor  #blocks  name

   8        0  250059096 sda
   8        1    1024000 sda1
   8        2     266240 sda2
   8        3     131072 sda3
   8        4  227298304 sda4
   8        5   13998080 sda5
   8        6    7340032 sda6
---------------------- END /proc/partitions ---------------------

Content of '/proc/net/dev'
------------------------- /proc/net/dev --------------------

Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
  sit0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
    lo: 2839536    1984    0    0    0     0          0         0  2839536    1984    0    0    0     0       0          0
  eth0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
---------------------- END /proc/net/dev ---------------------

Content of '/proc/cmdline'
------------------------- /proc/cmdline --------------------

BOOT_IMAGE=kernel ramdisk_size=328192 init=/bin/minit CONSOLE=/dev/tty1 vga=0x317 root=/dev/ram0 rw quiet irqpoll pci=nomsi EIS_REINSTALLALLOW=0 EPE_LANGUAGE=ENU EPE_OSSEL=0 EPE_MBRID=0062DFA-056F6EB-0000000-0000000 initrd=/initrd.gz
---------------------- END /proc/cmdline ---------------------

ls -l /lib/modules/
------------------------- /lib/modules/ --------------------

total 1
drwxr-xr-x 3 root root 1024 Jun 18 15:16 3.14.4-gentoo
---------------------- END /lib/modules/ ---------------------

uname -r
------------------------- uname -r --------------------

3.14.4-gentoo
---------------------- END uname -r ---------------------

Content of '/tmp/pcitable'
------------------------- /tmp/pcitable --------------------

"0x00008086"  "0x000015a3" "0xffffffff" "0xffffffff" "e1000e" "Empirum detected Network Interface Card"
"0x00008086"  "0x00009c83" "0xffffffff" "0xffffffff" "ahci" "Empirum detected Mass Storage Controller"
---------------------- END /tmp/pcitable ---------------------

------------------------- Debug Messages --------------------
10 uncrypt Reading disk.ini...
0 uncrypt Decrypting ...
0 uncrypt Decryption completed successfully.
5 syslog Catching pending kernel messages...
10 boot msg_enter
0 boot Mounting /proc
0 boot Mounting /sys
5 boot Performing udev initial scan...
5 boot Making udev managing hotplug events...
0 boot Choosing network mode...
0 boot Network mode: dhcp
10 syslog Starting klogd...
10 syslog Starting syslogd...
0 boot Setting up modul dependencies...
0 boot Setting hostname.
0 boot Checking if CPU has 64Bit capability...
0 boot CPU has 64Bit capability.
0 boot Preparing modules...
0 boot Updating modules.conf...
0 boot loading usb modules
10 lo entering runlevel
1 lo Setting up loopback interface...
1 lo Loopback interface successfully set up.
10 httpd entering runlevel
10 startx entering runlevel
1 httpd Configuring .htaccess
0 startx Starting Tiny-X for framebuffer devices Xfbdev...
1 httpd htpassword successfully configured
1 httpd setting environment-variable $DESKTOP_DEST
1 httpd httpd starting httpd
0 startx Setting display variable...
0 startx Starting Browser...
10 startx Browser executed successfully.
10 modsetup entering runlevel
0 modsetup Preparing modules directory...
0 modsetup Removing usb_storage...
0 modsetup Loading USB Net driver asix
0 modsetup Loading edd support...
0 modsetup Loading input device driver...
0 modsetup Installing driver sermouse
0 modsetup Installing driver newtonkbd
0 modsetup Installing driver sunkbd
0 modsetup Installing driver xtkbd
0 modsetup Installing driver pcspkr
0 modsetup Installing IDE drivers...
0 modsetup Installing NIC drivers...
0 modsetup Installing SCSI drivers...
0 modsetup Loading scsi low level drivers...
0 modsetup Loading and inserting scsi disk driver...
0 modsetup Loading and inserting ide disk driver...
0 modsetup Loading fs-support...
0 modsetup Installing driver msdos
0 modsetup Installing driver xfs
0 modsetup Installing driver coda
0 modsetup Installing driver ntfs
0 modsetup Installing driver configfs
0 modsetup Installing driver reiserfs
0 modsetup Installing driver jfs
0 modsetup Installing driver exportfs
0 modsetup Installing driver kafs
0 modsetup Installing driver udf
0 modsetup Installing driver minix
0 modsetup Installing driver ncpfs
0 modsetup Installing driver cifs
0 modsetup Installing driver isofs
0 modsetup Loading raid and lvm...
0 modsetup Installing driver raid456
0 modsetup Installing driver dm-zero
0 modsetup Installing driver dm-crypt
0 modsetup Installing driver raid10
0 modsetup Installing driver dm-persistent-data
0 modsetup Installing driver dm-log
0 modsetup Installing driver dm-raid
0 modsetup Installing driver linear
0 modsetup Installing driver dm-round-robin
0 modsetup Installing driver md-mod
0 modsetup Installing driver dm-snapshot
0 modsetup Installing driver multipath
0 modsetup Installing driver dm-mod
0 modsetup Installing driver raid1
0 modsetup Installing driver dm-thin-pool
0 modsetup Installing driver raid0
0 modsetup Installing driver dm-region-hash
0 modsetup Installing driver dm-multipath
0 modsetup Installing driver dm-mirror
0 modsetup Installing driver dm-bio-prison
0 modsetup Installing driver dm-bufio
0 modsetup Network adapter: 0x00008086-0x000015a3-0xffffffff-0xffffffff 
0 modsetup Storage adapter: 0x00008086-0x00009c83-0xffffffff-0xffffffff 
------------------------- End Debug Messages --------------------

------------------------- /etc/empirum_vars --------------------
EMP_PXECLIENT_DOTGATEWAY=""
EMP_PXECLIENT_DOTIP=""
EMP_PXECLIENT_DOTNETMASK=""
EMP_PXECLIENT_PXEUNICAST="1"
EMP_PXECLIENT_SERVICESERVERIP=""
EMP_MISC_INFOLEVEL="7"
EMP_MISC_PXEIMAGENAME="EPEHAN"
EMP_MISC_MONITORING="YES"
EMP_MISC_DISKTYP="EPE_AUTO"
EMP_MISC_DISKDIR="EPEHAN"
EMP_MISC_DEBUGLEVEL="10"
EMP_MISC_ISKERNELPARAMETER="YES"
EMP_MISC_ISOIMAGENAME="c:\temp\matrix42"
EMP_MISC_DISKBOOTLANGUAGE="de-DE"
EMP_MISC_OSSELECTN="1"
EMP_MISC_OSSELECT="auto"
EMP_MISC_DISKBOOTTEMPLATE="Empirum"
EMP_MISC_PE2="PE2"
EMP_MISC_3.14.4-GENTOO_3.71="3.14.4-gentoo_3.71"
EMP_MISC_DISKVER="1"
EMP_MISC_UPDATE="NO"
EMP_MISC_KERNELPARAMETER="ramdisk_size=328192"
EMP_MISC_INIT="/bin/minit"
EMP_MISC_CONSOLE="/dev/tty1"
EMP_MISC_VGA="0x317"
EMP_MISC_ROOT="/dev/ram0"
EMP_MISC_RW="rw"
EMP_MISC_QUIET="quiet"
EMP_MISC_IRQPOLL="irqpoll"
EMP_MISC_PCI="nomsi"
EMP_MISC_EIS_REINSTALLALLOW="0"
EMP_EMPINSTALLER_DATE="18.06.2015"
EMP_EMPINSTALLER_09:12="09:12"
EMP_EMPINSTALLER_PRODUCTVERSION="16.0.0"
EMP_EMPINSTALLER_PXEVERSION="29"
EMP_CLIENT_SUBNETMASK=""
EMP_CLIENT_SERVERIP="10.1.1.215"
EMP_CLIENT_DISABLEDHCP="0"
EMP_CLIENT_IPADDRESS=""
EMP_CLIENT_DEFAULTGATEWAY=""
EMP_CLIENT_DOMPDCIP="10.1.1.200"
EMP_CLIENT_SAVEUSER="1"
EMP_CLIENT_SHARECONFIGURATOR="CONFIGURATOR$"
EMP_CLIENT_USER="Service_M42Inst"
EMP_CLIENT_FTP_USER=""
EMP_CLIENT_SHARE="EMPINST$"
EMP_CLIENT_DOMPDC="HANDC01"
EMP_CLIENT_EMPSRVFQDN="meravis.de"
EMP_CLIENT_CLIENTTYPE="LINUX"
EMP_CLIENT_SERVER="handshw01"
EMP_CLIENT_DNSSERVER="10.1.1.200"
EMP_CLIENT_LOGONDOMAIN="meravis"
EMP_CLIENT_USEDHCPOPTIONS=""
EMP_CLIENT_EMPSRVLONG="handshw01.meravis.de"
EMP_CLIENT_PASSWORD="Matrix13!"
EMP_CLIENT_USEDHCPOPTIONSB="NO"
EMP_CLIENT_LOGONTODOMAIN="YES"
EMP_CLIENT_FTP_PASSWORD=""
EPE_LANGUAGE=ENU
EPE_OSSEL=0
EPE_MBRID=0062DFA-056F6EB-0000000-0000000
------------------------- End /etc/empirum_vars --------------------

------------------------- /etc/profile --------------------
export PS1="Client # "

alias la="ls -la"

export PATH=$PATH:/bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin

export HOME=/root


export localout=/dev/tty1

export LANGEXT=enu
export CPU_ARCH=x64
export LANGUAGE=ENU
export OSSEL=0
export MBRID=0062DFA-056F6EB-0000000-0000000
export DESKTOP_DEST=/var/www/data/select/empirum.html
export DESKTOP_SELECT=/var/www/data/empirumsrcselect.html
export DESKTOP_PROMPT_INF=/var/www/data/select/cgi-bin/prompt.inf
export DISPLAY=127.0.0.1:0.0
------------------------- End /etc/profile --------------------

------------------------- EPE_Info.txt --------------------
------------------------- End EPE_Info.txt --------------------
Hat sich alle Infos gezogen, aber blöd ist, dass er trotz des eingestellten 3.71 Templates noch das 3.69 benutzt hat.
^^ Was letztendlich das Problem gewesen ist.. ^^

MfG
Boris.
Mit freundlichem Gruß
Boris.

Produktiv: Empirum v18.0.2 + EPE 4.7.1
Testsystem: Empirum v18.0.2

Benutzeravatar
Bobby.S
Beiträge: 63
Registriert: 20. Feb 2015, 12:05
Kontaktdaten:

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von Bobby.S » 19. Jun 2015, 11:19

Hat sich ein neues Problem ergeben...
https://forums.lenovo.com/t5/X-X-Tablet ... -p/1705935

Vielleicht für andere auch Interessant, das Dock der X1 Geräte lässt sich per LAN nicht ansprechen.. :?
Wird sowas eig. nicht von Lenovo/IBM vorher getestet !?! :roll:
Mit freundlichem Gruß
Boris.

Produktiv: Empirum v18.0.2 + EPE 4.7.1
Testsystem: Empirum v18.0.2

HansDampf
Beiträge: 28
Registriert: 09. Mai 2016, 08:59
Kontaktdaten:

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von HansDampf » 25. Mai 2016, 14:45

Wir haben zwar aktuelle Templates am Start (die neuste angezeigte ist 3.7.4), aber wir kriegen dennoch keine SpyDatei erstellt.

Ein weiteres Problem ist, dass die Anleitung zur manuellen Treiber Integration uns nicht weiterhilft:
http://helpfiles.matrix42-web.de/2013_D ... ration.htm
Dort steht zwar über Punkt 4, dass man auf hexadezimal umrechnen soll, es ist aber nicht ganz klar wie das gehen soll.
Zudem sind unsere Werte scheinbar schon in hexadezimal, aber LÄNGER als 4 Stellen.

Ob man hier nicht vom Backend her es so programmieren könnte, dass man einfach die Werte, die bei Windows angezeigt werden eintragen kann??

Wir würden uns über Hilfe bei den beiden Punkten freuen!

Gruß,

Hans Dampf

Benutzeravatar
Hendrik_Ambrosius
Moderator
Moderator
Beiträge: 7586
Registriert: 13. Dez 2004, 23:10
Wohnort: Adendorf/Lüneburg

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von Hendrik_Ambrosius » 26. Mai 2016, 10:59

Klar könnte man das so programmieren. Gute Idee für unser Ideas-Portal: http://ideas.matrix42.com/ideas

Umrechnen kann man z.B. via http://binaer-dezimal-hexadezimal-umrec ... ebapps.de/
Hendrik Ambrosius / Senior Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 AG | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG or of the support team.

HansDampf
Beiträge: 28
Registriert: 09. Mai 2016, 08:59
Kontaktdaten:

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von HansDampf » 26. Mai 2016, 11:30

Hallo Hendrik_Ambrosius,

danke für die Antwort.
Die Suche nach einem Umrechnungstool war nicht so sehr das Problem, sondern eher, welche Daten aus dem MS Eigenschaftsfenster der Netzwerkkarte genutzt werden sollten und wie diese später angepasst werden sollten.

Schau Dir doch bitte mal die erwähnten Anweisungen oberhalb des Punktes 4 an.
Wir werden da nicht schlau draus und wie gesagt, was ist zu tun, wenn es mehr als 4 Stellen gibt?
Bild
Wie genau ist die Zuordnung von Machine ID old, Machine ID add, Machine ID Sub, die man ja hier manuell eintragen muss?
Bild
Das geht aus der Anleitung leider nicht hervor.

Benutzeravatar
Hendrik_Ambrosius
Moderator
Moderator
Beiträge: 7586
Registriert: 13. Dez 2004, 23:10
Wohnort: Adendorf/Lüneburg

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von Hendrik_Ambrosius » 26. Mai 2016, 14:52

So habe ich das noch nie versucht.
Man nimmt i.d.R. die Daten aus dem Spy-Lauf, also aus der Datei unterhalb von empinst\wizard\pxespy
Da ist auch die MachineID.
Hendrik Ambrosius / Senior Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 AG | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG or of the support team.

HansDampf
Beiträge: 28
Registriert: 09. Mai 2016, 08:59
Kontaktdaten:

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von HansDampf » 26. Mai 2016, 16:00

Genau, das wollten wir ja auch machen, aber da der Netzwerkkartentreiber wohl nicht erkannt wird, geht auch der Spy nicht.
Nun war die Idee, den Netzwerkkartentreiber manuell zu basteln.

Oder ist das zu kompliziert gedacht und es gibt eine einfachere Lösung für dieses Problem?

Ich frage mal so:
Was kann man tun, wenn kein Spy möglich ist, um ein Gerät zur Betriebssysteminstallation per Matrix zum Laufen zu bekommen?

Benutzeravatar
Hendrik_Ambrosius
Moderator
Moderator
Beiträge: 7586
Registriert: 13. Dez 2004, 23:10
Wohnort: Adendorf/Lüneburg

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von Hendrik_Ambrosius » 26. Mai 2016, 20:02

Aber der Treiber den Sie via die Treiberverwaltung einbinden ist ja nur für Windows.
Dadurch wird die EPE Umgebung (linux-basiert) auch nicht besser laufen.

Abgesehen davon kann man aber auch einen USB-Stick an den Rechner stecken, dann schreibt er das SPY-File auf den USB-Stick.

Hat das Gerät Skylake Chips? Dann brauchen Sie auf jeden Fall die EPE4 von Marketplace.Matrix42.com
Sonst wird EPE nicht gehen.
Hendrik Ambrosius / Senior Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 AG | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG or of the support team.

HansDampf
Beiträge: 28
Registriert: 09. Mai 2016, 08:59
Kontaktdaten:

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von HansDampf » 27. Mai 2016, 14:36

Hallo Hendrik_Ambrosius,

genau dort lag der Hase im Pfeffer.
Die Info hilft uns schon mal weiter. Danke!

Das mit dem USB Stick geht auch nicht, weil gar kein Spy erstellt werden kann, wenn keine Kommunikation mit dem Rechner erfolgen kann, weil die NIC nicht erkannt wird.

Wir haben heute morgen mal in das Update reingeschaut, sind aber beim Installieren des Hotfixes Hotfix_16.0.3_20160404.1_PRB28659 steckengeblieben.
Gibt es eine genaue Anleitung dazu?
Konkret geht es um die Reinstallation des Empirum PXE Bild
Wenn man da unten auf den Button "Installieren" klickt und dann alles ausser Empirum PXE aushakt, kommt danach die abgebildete Fehlermeldung und darauf hin:
"Bei der Installation der ausgewählten Dienste ist ein Fehler aufgetreten."

Auch eine Installation von der bereits auf dem Server liegenden Empirum Subdepot Services 16.0 software per setup.exe schlägt dann fehl und bricht ab.

Benutzeravatar
Hendrik_Ambrosius
Moderator
Moderator
Beiträge: 7586
Registriert: 13. Dez 2004, 23:10
Wohnort: Adendorf/Lüneburg

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von Hendrik_Ambrosius » 27. Mai 2016, 19:06

Anscheinend ist ja die Anmeldung falsch wie die Fehlermeldung im Screenshot sagt.
Also noch mal neu eintragen im Reiter "Installationsanmeldung".
Und bei Domänenkonten immer die Domain voranstellen: mydom\myuser

Bitte nur den PXE-Dienst per DBUtil ODER das Services Paket nutzen.
Und das Services Paket nur über den Agent installieren, nicht per setup.exe!
Hendrik Ambrosius / Senior Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 AG | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com

Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG or of the support team.

HansDampf
Beiträge: 28
Registriert: 09. Mai 2016, 08:59
Kontaktdaten:

Re: Lenovo Carbon X1 NETSpy Problemchen

Beitrag von HansDampf » 06. Jul 2016, 17:49

Wir sind mittlerweile auf folgendem Versionsstand:
Matrix Client Management Software: 16.1.0.4332
EPE Version 4

Es hat sich bei dem Lenovo Carbon X1 Modell 20FC-S02300 allerdings keine Besserung ergeben.
Werder mit dieser Dockingstation, noch mit der Peitsche, die oben abgebildet ist, kann man eine Spy Datei erstellen.

Hätte irgendjemand Tipps fürs uns?

Antworten

Zurück zu „OS Installer“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 17 Gäste