Hallo, wir habe ein Problem mit unseren Empirum Preboot Environment (EPE4.5.2) , Wenn ich das einsetze bekommmen wir bei der Installation die Sicherheitsabfrage von Windows. Also: Wollen sie die Software installieren.... Damm mit OK bestädigen. Wenn ich das alte Bootimage (PE2 2.14.4_geetoo 3.75) einsetze bekomme ich die Meldung nicht.
Wir setzen die Versinon 17.1 auf einen Server 2012 ein.
Kann mit jemenad helfen?
Gruß Andreas
Empirum Preboot Environment
-
- Beiträge: 52
- Registriert: 02. Nov 2009, 01:09
- Kontaktdaten:
-
- Moderator
- Beiträge: 7626
- Registriert: 13. Dez 2004, 23:10
- Wohnort: Adendorf/Lüneburg
Re: Empirum Preboot Environment
Versuchen Sie mal folgendes:
In the EMC go to Configurator\Depot.
In the Environment-Section add a variable called SEE_MASK_NOZONECHECKS and set the value to 1.
Und auch in die EmpirumAgent.bat oder wie Ihre Post-Install-Datei heißt einbauen:
SET SEE_MASK_NOZONECHECKS=1
In the EMC go to Configurator\Depot.
In the Environment-Section add a variable called SEE_MASK_NOZONECHECKS and set the value to 1.
Und auch in die EmpirumAgent.bat oder wie Ihre Post-Install-Datei heißt einbauen:
SET SEE_MASK_NOZONECHECKS=1
Hendrik Ambrosius / Senior Consultant
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 AG | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG or of the support team.
Mobile: +49 172 408 4447 | hendrik.ambrosius@matrix42.com
Matrix42 AG | Elbinger Straße 7 | 60487 Frankfurt am Main | Germany | www.matrix42.com
Disclaimer: I participate in this forum on a voluntary basis. Views expressed are not necessarily those of Matrix42 AG or of the support team.
-
- Beiträge: 52
- Registriert: 02. Nov 2009, 01:09
- Kontaktdaten:
Re: Empirum Preboot Environment
Habe das in unsere bat Datei einfügt und konnte unsere Installation erfolgreich testen. Vielen Dank Ambrosius
Gruß Andreas

Gruß Andreas
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 0 Gäste